Commit 11bbc1d8 authored by Andrew Vasquez's avatar Andrew Vasquez Committed by James Bottomley

[SCSI] qla2xxx: Export TLV data on supported ISPs.

Firmware currently provides PB and PGF TLVs.
Signed-off-by: default avatarAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent ce0423f4
......@@ -744,6 +744,57 @@ static struct bin_attribute sysfs_xgmac_stats_attr = {
.read = qla2x00_sysfs_read_xgmac_stats,
};
static ssize_t
qla2x00_sysfs_read_dcbx_tlv(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
int rval;
uint16_t actual_size;
if (!capable(CAP_SYS_ADMIN) || off != 0 || count > DCBX_TLV_DATA_SIZE)
return 0;
if (ha->dcbx_tlv)
goto do_read;
ha->dcbx_tlv = dma_alloc_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
&ha->dcbx_tlv_dma, GFP_KERNEL);
if (!ha->dcbx_tlv) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate memory for DCBX TLV read-data.\n");
return 0;
}
do_read:
actual_size = 0;
memset(ha->dcbx_tlv, 0, DCBX_TLV_DATA_SIZE);
rval = qla2x00_get_dcbx_params(vha, ha->dcbx_tlv_dma,
DCBX_TLV_DATA_SIZE);
if (rval != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to read DCBX TLV data (%x).\n", rval);
count = 0;
}
memcpy(buf, ha->dcbx_tlv, count);
return count;
}
static struct bin_attribute sysfs_dcbx_tlv_attr = {
.attr = {
.name = "dcbx_tlv",
.mode = S_IRUSR,
},
.size = 0,
.read = qla2x00_sysfs_read_dcbx_tlv,
};
static struct sysfs_entry {
char *name;
struct bin_attribute *attr;
......@@ -759,6 +810,7 @@ static struct sysfs_entry {
{ "edc", &sysfs_edc_attr, 2 },
{ "edc_status", &sysfs_edc_status_attr, 2 },
{ "xgmac_stats", &sysfs_xgmac_stats_attr, 3 },
{ "dcbx_tlv", &sysfs_dcbx_tlv_attr, 3 },
{ NULL },
};
......
......@@ -2401,6 +2401,10 @@ struct qla_hw_data {
void *xgmac_data;
dma_addr_t xgmac_data_dma;
#define DCBX_TLV_DATA_SIZE PAGE_SIZE
void *dcbx_tlv;
dma_addr_t dcbx_tlv_dma;
struct task_struct *dpc_thread;
uint8_t dpc_active; /* DPC routine is active */
......
......@@ -1406,6 +1406,7 @@ struct access_chip_rsp_84xx {
#define MBC_RESTART_MPI_FW 0x3d
#define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */
#define MBC_GET_XGMAC_STATS 0x7a
#define MBC_GET_DCBX_PARAMS 0x51
/* Flash access control option field bit definitions */
#define FAC_OPT_FORCE_SEMAPHORE BIT_15
......
......@@ -296,6 +296,9 @@ qla81xx_fac_erase_sector(scsi_qla_host_t *, uint32_t, uint32_t);
extern int
qla2x00_get_xgmac_stats(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t *);
extern int
qla2x00_get_dcbx_params(scsi_qla_host_t *, dma_addr_t, uint16_t);
/*
* Global Function Prototypes in qla_isr.c source file.
*/
......
......@@ -3500,3 +3500,40 @@ qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma,
return rval;
}
int
qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma,
uint16_t size)
{
int rval;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
if (!IS_QLA81XX(vha->hw))
return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_GET_DCBX_PARAMS;
mcp->mb[1] = 0;
mcp->mb[2] = MSW(tlv_dma);
mcp->mb[3] = LSW(tlv_dma);
mcp->mb[6] = MSW(MSD(tlv_dma));
mcp->mb[7] = LSW(MSD(tlv_dma));
mcp->mb[8] = size;
mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
mcp->in_mb = MBX_2|MBX_1|MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
"mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
mcp->mb[0], mcp->mb[1], mcp->mb[2]));
} else {
DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
}
return rval;
}
......@@ -2434,6 +2434,10 @@ qla2x00_mem_free(struct qla_hw_data *ha)
vfree(ha->fw_dump);
}
if (ha->dcbx_tlv)
dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
ha->dcbx_tlv, ha->dcbx_tlv_dma);
if (ha->xgmac_data)
dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
ha->xgmac_data, ha->xgmac_data_dma);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment