Commit 11eaf6df authored by Ezequiel García's avatar Ezequiel García Committed by Boris Brezillon

mtd: nand: Remove BUG() abuse in nand_scan_tail

There's no reason to BUG() when parameters are being
validated. Drivers can get things wrong, and it's much nicer
to just throw a noisy warn and fail gracefully, than calling
BUG() and throwing the whole system down the drain.
Signed-off-by: default avatarEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: default avatarRichard Weinberger <richard@nod.at>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
parent 2cd395d1
......@@ -4107,10 +4107,12 @@ int nand_scan_tail(struct mtd_info *mtd)
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct nand_buffers *nbuf;
int ret;
/* New bad blocks should be marked in OOB, flash-based BBT, or both */
BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
!(chip->bbt_options & NAND_BBT_USE_FLASH));
if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
!(chip->bbt_options & NAND_BBT_USE_FLASH)))
return -EINVAL;
if (!(chip->options & NAND_OWN_BUFFERS)) {
nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
......@@ -4148,9 +4150,10 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->layout = &nand_oob_128;
break;
default:
pr_warn("No oob scheme defined for oobsize %d\n",
mtd->oobsize);
BUG();
WARN(1, "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
ret = -EINVAL;
goto err_free;
}
}
......@@ -4166,8 +4169,9 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
ret = -EINVAL;
goto err_free;
}
if (!ecc->read_page)
ecc->read_page = nand_read_page_hwecc_oob_first;
......@@ -4197,8 +4201,9 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->read_page == nand_read_page_hwecc ||
!ecc->write_page ||
ecc->write_page == nand_write_page_hwecc)) {
pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
ret = -EINVAL;
goto err_free;
}
/* Use standard syndrome read/write page function? */
if (!ecc->read_page)
......@@ -4216,8 +4221,9 @@ int nand_scan_tail(struct mtd_info *mtd)
if (mtd->writesize >= ecc->size) {
if (!ecc->strength) {
pr_warn("Driver must set ecc.strength when using hardware ECC\n");
BUG();
WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
ret = -EINVAL;
goto err_free;
}
break;
}
......@@ -4243,8 +4249,9 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
BUG();
WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
ret = -EINVAL;
goto err_free;
}
ecc->calculate = nand_bch_calculate_ecc;
ecc->correct = nand_bch_correct_data;
......@@ -4269,8 +4276,9 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->bytes = 0;
ecc->priv = nand_bch_init(mtd);
if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
WARN(1, "BCH ECC initialization failed!\n");
ret = -EINVAL;
goto err_free;
}
break;
......@@ -4288,8 +4296,9 @@ int nand_scan_tail(struct mtd_info *mtd)
break;
default:
pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
BUG();
WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
ret = -EINVAL;
goto err_free;
}
/* For many systems, the standard OOB write also works for raw */
......@@ -4319,8 +4328,9 @@ int nand_scan_tail(struct mtd_info *mtd)
*/
ecc->steps = mtd->writesize / ecc->size;
if (ecc->steps * ecc->size != mtd->writesize) {
pr_warn("Invalid ECC parameters\n");
BUG();
WARN(1, "Invalid ECC parameters\n");
ret = -EINVAL;
goto err_free;
}
ecc->total = ecc->steps * ecc->bytes;
......@@ -4398,6 +4408,10 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Build bad block table */
return chip->scan_bbt(mtd);
err_free:
if (!(chip->options & NAND_OWN_BUFFERS))
kfree(chip->buffers);
return ret;
}
EXPORT_SYMBOL(nand_scan_tail);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment