drm/i915: rename audio ELD registers

Change the definitions from GEN5 to IBX as they aren't in the CPU and
some SNB systems actually shipped with IBX chipsets (or, at least that's
a supported configuration).

The GEN7_* register addresses actually take effect since GEN6 and should
be prefixed by CPT, the PCH code name.
Suggested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

drivers/gpu/drm/i915/i915_reg.h

@@ -3569,17 +3569,17 @@
 #define G4X_ELD_ACK			(1 << 4)
 #define G4X_HDMIW_HDMIEDID		0x6210C
 
-#define GEN5_HDMIW_HDMIEDID_A		0xE2050
-#define GEN5_AUD_CNTL_ST_A		0xE20B4
-#define GEN5_ELD_BUFFER_SIZE		(0x1f << 10)
-#define GEN5_ELD_ADDRESS		(0x1f << 5)
-#define GEN5_ELD_ACK			(1 << 4)
-#define GEN5_AUD_CNTL_ST2		0xE20C0
-#define GEN5_ELD_VALIDB			(1 << 0)
-#define GEN5_CP_READYB			(1 << 1)
-
-#define GEN7_HDMIW_HDMIEDID_A		0xE5050
-#define GEN7_AUD_CNTRL_ST_A		0xE50B4
-#define GEN7_AUD_CNTRL_ST2		0xE50C0
+#define IBX_HDMIW_HDMIEDID_A		0xE2050
+#define IBX_AUD_CNTL_ST_A		0xE20B4
+#define IBX_ELD_BUFFER_SIZE		(0x1f << 10)
+#define IBX_ELD_ADDRESS			(0x1f << 5)
+#define IBX_ELD_ACK			(1 << 4)
+#define IBX_AUD_CNTL_ST2		0xE20C0
+#define IBX_ELD_VALIDB			(1 << 0)
+#define IBX_CP_READYB			(1 << 1)
+
+#define CPT_HDMIW_HDMIEDID_A		0xE5050
+#define CPT_AUD_CNTL_ST_A		0xE50B4
+#define CPT_AUD_CNTRL_ST2		0xE50C0
 
 #endif /* _I915_REG_H_ */

drivers/gpu/drm/i915/intel_display.c

@@ -5877,13 +5877,13 @@ static void ironlake_write_eld(struct drm_connector *connector,
 	int aud_cntrl_st2;
 
 	if (HAS_PCH_IBX(connector->dev)) {
-		hdmiw_hdmiedid = GEN5_HDMIW_HDMIEDID_A;
-		aud_cntl_st = GEN5_AUD_CNTL_ST_A;
-		aud_cntrl_st2 = GEN5_AUD_CNTL_ST2;
+		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
+		aud_cntl_st = IBX_AUD_CNTL_ST_A;
+		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
 	} else {
-		hdmiw_hdmiedid = GEN7_HDMIW_HDMIEDID_A;
-		aud_cntl_st = GEN7_AUD_CNTRL_ST_A;
-		aud_cntrl_st2 = GEN7_AUD_CNTRL_ST2;
+		hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
+		aud_cntl_st = CPT_AUD_CNTL_ST_A;
+		aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
 	}
 
 	i = to_intel_crtc(crtc)->pipe;
@@ -5897,12 +5897,12 @@ static void ironlake_write_eld(struct drm_connector *connector,
 	if (!i) {
 		DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
 		/* operate blindly on all ports */
-		eldv = GEN5_ELD_VALIDB;
-		eldv |= GEN5_ELD_VALIDB << 4;
-		eldv |= GEN5_ELD_VALIDB << 8;
+		eldv = IBX_ELD_VALIDB;
+		eldv |= IBX_ELD_VALIDB << 4;
+		eldv |= IBX_ELD_VALIDB << 8;
 	} else {
 		DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
-		eldv = GEN5_ELD_VALIDB << ((i - 1) * 4);
+		eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
 	}
 
 	i = I915_READ(aud_cntrl_st2);
@@ -5918,7 +5918,7 @@ static void ironlake_write_eld(struct drm_connector *connector,
 	}
 
 	i = I915_READ(aud_cntl_st);
-	i &= ~GEN5_ELD_ADDRESS;
+	i &= ~IBX_ELD_ADDRESS;
 	I915_WRITE(aud_cntl_st, i);
 
 	len = min_t(uint8_t, eld[2], 21);	/* 84 bytes of hw ELD buffer */