Commit 12335eba authored by Heiko Stuebner's avatar Heiko Stuebner

arm64: dts: rockchip: bring rk3399-firefly power-tree in line

The power-tree on the rk3399-firefly did not completely match the
documentation and vendor devicetree. It was also missing some
supply-hirarchy information and some regulator-gpio names did not
match the schematics. Fix this for the existing regulators before
introducing new things.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent d717f735
......@@ -95,6 +95,15 @@ clkin_gmac: external-gmac-clock {
#clock-cells = <0>;
};
dc_12v: dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
rt5640-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rockchip,rt5640-codec";
......@@ -134,15 +143,27 @@ sdio_pwrseq: sdio-pwrseq {
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_1v8>;
};
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_drv>;
pinctrl-0 = <&pcie_pwr_en>;
regulator-name = "vcc3v3_pcie";
regulator-always-on;
regulator-boot-on;
vin-supply = <&dc_12v>;
};
vcc3v3_sys: vcc3v3-sys {
......@@ -152,32 +173,29 @@ vcc3v3_sys: vcc3v3-sys {
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sys>;
};
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
regulator-always-on;
vin-supply = <&vcc_sys>;
};
vcc5v0_sys: vcc5v0-sys {
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_phy";
regulator-always-on;
regulator-boot-on;
vin-supply = <&dc_12v>;
};
vdd_log: vdd-log {
......@@ -188,15 +206,7 @@ vdd_log: vdd-log {
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
};
vccadc_ref: vccadc-ref {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_sys>;
};
};
......@@ -232,7 +242,7 @@ &gmac {
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
clock_in_out = "input";
phy-supply = <&vcc_phy>;
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
......@@ -262,16 +272,16 @@ rk808: pmic@1b {
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
vcc10-supply = <&vcc3v3_sys>;
vcc11-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc_sys>;
vcc10-supply = <&vcc_sys>;
vcc11-supply = <&vcc_sys>;
vcc12-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc1v8_pmu>;
......@@ -332,12 +342,12 @@ regulator-state-mem {
};
};
vcc3v0_tp: LDO_REG2 {
regulator-name = "vcc3v0_tp";
vcc2v8_dvp: LDO_REG2 {
regulator-name = "vcc2v8_dvp";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
......@@ -355,8 +365,8 @@ regulator-state-mem {
};
};
vcc_sd: LDO_REG4 {
regulator-name = "vcc_sd";
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
......@@ -413,7 +423,7 @@ regulator-state-mem {
};
};
vcc3v3_s3: SWITCH_REG1 {
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
......@@ -443,7 +453,7 @@ vdd_cpu_b: regulator@40 {
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc5v0_sys>;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
......@@ -460,7 +470,7 @@ vdd_gpu: regulator@41 {
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc5v0_sys>;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
......@@ -528,7 +538,7 @@ &io_domains {
bt656-supply = <&vcc1v8_dvp>;
audio-supply = <&vcca1v8_codec>;
sdmmc-supply = <&vcc_sd>;
sdmmc-supply = <&vcc_sdio>;
gpio1830-supply = <&vcc_3v0>;
};
......@@ -563,7 +573,7 @@ lcd_panel_reset: lcd-panel-reset {
};
pcie {
pcie_drv: pcie-drv {
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
......@@ -601,7 +611,7 @@ pmic_int_l: pmic-int-l {
};
usb2 {
host_vbus_drv: host-vbus-drv {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
......@@ -616,7 +626,7 @@ &pwm2 {
};
&saradc {
vref-supply = <&vccadc_ref>;
vref-supply = <&vcca1v8_s3>;
status = "okay";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment