Skip to content

L
linux
Commit 12475cc4 authored by Steve French's avatar Steve French
Browse files
Options

Merge bk://linux.bkbits.net/linux-2.5 

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs
parents fa31b02f 28f95425
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 8052 additions and 7075 deletions
Documentation/mips/pci/pci.README
View file @ 12475cc4
......@@ -15,13 +15,6 @@ is doing its own pcibios thing and it has become a big
mess. This generic pci code is meant to clean up the mips
pci mess and make it easier to add pci support to new boards.
arch/mips/kernel/pci_auto.c has the pci bus enumeration code.
This code scans the pci bus(es) and assigns all of the resources.
Thus, you don't need the boot code to that, and many boot codes
don't do it correctly anyway. To enable the pci_auto code, add
define_bool CONFIG_PCI_AUTO y
inside the define for your board in arch/mips/config.in.
For example, the Galileo EV96100 board looks like this:
......@@ -29,7 +22,6 @@ if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
define_bool CONFIG_PCI y
define_bool CONFIG_MIPS_GT96100 y
define_bool CONFIG_NEW_PCI y
define_bool CONFIG_PCI_AUTO y
define_bool CONFIG_SWAP_IO_SPACE y
fi
......@@ -42,11 +34,6 @@ define_bool CONFIG_NEW_PCI y
inside the define for your board. Again, the EV96100 example above
show NEW_PCI turned on.
Note that you can enable CONFIG_NEW_PCI code without enabling
CONFIG_PCI_AUTO. But you can't do the opposite because the pci_auto
routines are called from pcibios_init(), which is part of the
CONFIG_NEW_PCI code.
Now you need to add your files to hook in your pci configuration
cycles. Usually you'll need only a couple of files named something
......
Documentation/mips/time.README
View file @ 12475cc4
......@@ -103,9 +103,9 @@ Step 1: decide how you like to implement the time services.
Do you plan to use the CPU counter register as the timer interrupt
or use an exnternal timer?
In order to CPU counter register as the timer interrupt source, you must
know the counter speed (mips_counter_frequency). It is usually the
same as the CPU speed (Or it is ALWAYS the same?)
In order to use CPU counter register as the timer interrupt source, you
must know the counter speed (mips_counter_frequency). It is usually the
same as the CPU speed or an integral divisor of it.
d) decide on whether you want to use high-level or low-level timer
interrupt routines. The low-level one is presumably faster, but should
......@@ -154,8 +154,45 @@ For some tricky cases, you may need to add your own wrapper functions
for some of the functions in time.c.
For example, you may define your own timer interrupt routine, which does
its own processing and in turn calls timer_interrupt().
some of its own processing and then calls timer_interrupt().
You can also over-ride any of the built-in functions (gettimeoffset,
RTC routines and/or timer interrupt routine).
PORTING NOTES FOR SMP
----------------------
If you have a SMP box, things are slightly more complicated.
The time service running every jiffy is logically divided into two parts:
1) the one for the whole system (defined in timer_interrupt())
2) the one that should run for each CPU (defined in local_timer_interrupt())
You need to decide on your timer interrupt sources.
case 1) - whole system has only one timer interrupt delivered to one CPU
In this case, you set up timer interrupt as in UP systems. In addtion,
you need to set emulate_local_timer_interrupt to 1 so that other
CPUs get to call local_timer_interrupt().
THIS IS CURRENTLY NOT IMPLEMNETED. However, it is rather easy to write
one should such a need arise. You simply make a IPI call.
case 2) - each CPU has a separate timer interrupt
In this case, you need to set up IRQ such that each of them will
call local_timer_interrupt(). In addition, you need to arrange
one and only one of them to call timer_interrupt().
You can also do the low-level version of those interrupt routines,
following similar dispatching routes described above.
Note about do_gettimeoffset():
It is very likely the CPU counter registers are not sync'ed up in a SMP box.
Therefore you cannot really use the many of the existing routines that
are based on CPU counter. You should wirte your own gettimeoffset rouinte
if you want intra-jiffy resolution.
arch/h8300/kernel/process.c
View file @ 12475cc4
......@@ -283,7 +283,7 @@ unsigned long get_wchan(struct task_struct *p)
stack_page = (unsigned long)p;
fp = ((struct pt_regs *)p->thread.ksp)->er6;
do {
if (fp < stack_page+sizeof(struct task_struct) ||
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= 8184+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
......
arch/i386/kernel/apm.c
View file @ 12475cc4
......@@ -1701,7 +1701,7 @@ static int apm(void *unused)
daemonize("kapmd");
current->flags |= PF_IOTHREAD;
current->flags |= PF_NOFREEZE;
#ifdef CONFIG_SMP
/* 2002/08/01 - WT
......
arch/i386/mm/hugetlbpage.c
View file @ 12475cc4
......@@ -140,32 +140,31 @@ follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
#if 0 /* This is just for testing */
struct page *
follow_huge_addr(struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long address, int write)
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
{
unsigned long start = address;
int length = 1;
int nr;
struct page *page;
struct vm_area_struct *vma;
nr = follow_hugetlb_page(mm, vma, &page, NULL, &start, &length, 0);
if (nr == 1)
return page;
return NULL;
}
if (! mm->used_hugetlb)
return ERR_PTR(-EINVAL);
/*
* If virtual address `addr' lies within a huge page, return its controlling
* VMA, else NULL.
*/
struct vm_area_struct *hugepage_vma(struct mm_struct *mm, unsigned long addr)
{
if (mm->used_hugetlb) {
struct vm_area_struct *vma = find_vma(mm, addr);
if (vma && is_vm_hugetlb_page(vma))
return vma;
}
return NULL;
vma = find_vma(mm, addr);
if (!vma || !is_vm_hugetlb_page(vma))
return ERR_PTR(-EINVAL);
pte = huge_pte_offset(mm, address);
/* hugetlb should be locked, and hence, prefaulted */
WARN_ON(!pte || pte_none(*pte));
page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
WARN_ON(!PageCompound(page));
return page;
}
int pmd_huge(pmd_t pmd)
......@@ -183,15 +182,9 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
#else
struct page *
follow_huge_addr(struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long address, int write)
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
{
return NULL;
}
struct vm_area_struct *hugepage_vma(struct mm_struct *mm, unsigned long addr)
{
return NULL;
return ERR_PTR(-EINVAL);
}
int pmd_huge(pmd_t pmd)
......
arch/ia64/mm/hugetlbpage.c
View file @ 12475cc4
......@@ -49,8 +49,12 @@ huge_pte_offset (struct mm_struct *mm, unsigned long addr)
pte_t *pte = NULL;
pgd = pgd_offset(mm, taddr);
pmd = pmd_offset(pgd, taddr);
pte = pte_offset_map(pmd, taddr);
if (pgd_present(*pgd)) {
pmd = pmd_offset(pgd, taddr);
if (pmd_present(*pmd))
pte = pte_offset_map(pmd, taddr);
}
return pte;
}
......@@ -150,24 +154,19 @@ follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
return i;
}
struct vm_area_struct *hugepage_vma(struct mm_struct *mm, unsigned long addr)
{
if (mm->used_hugetlb) {
if (REGION_NUMBER(addr) == REGION_HPAGE) {
struct vm_area_struct *vma = find_vma(mm, addr);
if (vma && is_vm_hugetlb_page(vma))
return vma;
}
}
return NULL;
}
struct page *follow_huge_addr(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long addr, int write)
struct page *follow_huge_addr(struct mm_struct *mm, unsigned long addr, int write)
{
struct page *page;
pte_t *ptep;
if (! mm->used_hugetlb)
return ERR_PTR(-EINVAL);
if (REGION_NUMBER(addr) != REGION_HPAGE)
return ERR_PTR(-EINVAL);
ptep = huge_pte_offset(mm, addr);
if (!ptep || pte_none(*ptep))
return NULL;
page = pte_page(*ptep);
page += ((addr & ~HPAGE_MASK) >> PAGE_SHIFT);
return page;
......
arch/m68k/kernel/process.c
View file @ 12475cc4
......@@ -399,7 +399,7 @@ unsigned long get_wchan(struct task_struct *p)
stack_page = (unsigned long)(p->thread_info);
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct task_struct) ||
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= 8184+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
......
arch/m68knommu/kernel/process.c
View file @ 12475cc4
......@@ -421,7 +421,7 @@ unsigned long get_wchan(struct task_struct *p)
stack_page = (unsigned long)p;
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct task_struct) ||
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= 8184+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
......
arch/mips/Kconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/Makefile
View file @ 12475cc4
......@@ -57,7 +57,7 @@ endif
cflags-y := -I $(TOPDIR)/include/asm/gcc
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += $(call check_gcc, -finline-limit=100000,)
LDFLAGS_vmlinux += -G 0 -static # -N
LDFLAGS_vmlinux += -G 0 -static -n
MODFLAGS += -mlong-calls
cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
......@@ -108,9 +108,14 @@ while :; do \
gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \
break; \
done; \
if test x$(gcc-abi) != x$(gas-abi); then \
if test "$(gcc-abi)" != "$(gas-abi)"; then \
gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \
fi; \
if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \
$(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \
-xc /dev/null > /dev/null 2>&1 && \
gcc_isa=; \
fi; \
echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa)
#
......@@ -237,6 +242,13 @@ libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/
cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1500) += 0x80100000
#
# AMD Alchemy Pb1550 eval board
#
libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/
cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1550) += 0x80100000
#
# AMD Alchemy Db1000 eval board
#
......@@ -397,11 +409,12 @@ load-$(CONFIG_MOMENCO_OCELOT_C) += 0x80100000
# Momentum Jaguar ATX
#
core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
ifdef CONFIG_JAGUAR_DMALOW
load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x88000000
else
cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja
#ifdef CONFIG_JAGUAR_DMALOW
#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x88000000
#else
load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x80100000
endif
#endif
#
# NEC DDB
......@@ -523,7 +536,7 @@ endif
#
# SGI-IP32 (O2)
#
# Set the load address to >= 0x????????? if you want to leave space for symmon,
# Set the load address to >= 80069000 if you want to leave space for symmon,
# 0x80002000 for production kernels. Note that the value must be aligned to
# a multiple of the kernel stack size or the handling of the current variable
# will break so for 64-bit kernels we have to raise the start address by 8kb.
......
arch/mips/au1000/common/Makefile
View file @ 12475cc4
......@@ -6,10 +6,15 @@
# Makefile for the Alchemy Au1000 CPU, generic files.
#
obj-y += prom.o int-handler.o dma.o irq.o puts.o \
time.o reset.o clocks.o power.o setup.o \
sleeper.o
obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
au1xxx_irqmap.o clocks.o power.o setup.o sleeper.o
obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_PCI) += pci.o
ifdef CONFIG_SOC_AU1550
obj-y += dbdma.o
else
obj-y += dma.o
endif
arch/mips/au1000/common/au1xxx_irqmap.c 0 → 100644
View file @ 12475cc4
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx processor specific IRQ tables
*
* Copyright 2004 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <asm/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
/* The IC0 interrupt table. This is processor, rather than
* board dependent, so no reason to keep this info in the board
* dependent files.
*
* Careful if you change match 2 request!
* The interrupt handler is called directly from the low level dispatch code.
*/
au1xxx_irq_map_t au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ 2/*AU1000_SD_INT*/, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
/*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
/*{ AU1000_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },*/
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#else
#error "Error: Unknown Alchemy SOC"
#endif
};
int au1xxx_ic0_nr_irqs = sizeof(au1xxx_ic0_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/common/dbdma.c 0 → 100644
View file @ 12475cc4
This diff is collapsed.
arch/mips/au1000/common/dma.c
View file @ 12475cc4
......@@ -73,7 +73,7 @@ struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
};
// Device FIFO addresses and default DMA modes
static const struct {
static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
} dma_dev_table[DMA_NUM_DEV] = {
......@@ -120,12 +120,19 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
return len;
}
// Device FIFO addresses and default DMA modes - 2nd bank
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
{SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
{SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent
{SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
{SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent
};
void dump_au1000_dma_channel(unsigned int dmanr)
{
struct dma_chan *chan;
if (dmanr > NUM_AU1000_DMA_CHANNELS)
if (dmanr >= NUM_AU1000_DMA_CHANNELS)
return;
chan = &au1000_dma_table[dmanr];
......@@ -156,10 +163,16 @@ int request_au1000_dma(int dev_id, const char *dev_str,
void *irq_dev_id)
{
struct dma_chan *chan;
const struct dma_dev *dev;
int i, ret;
if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
#if defined(CONFIG_SOC_AU1100)
if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
return -EINVAL;
#else
if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
return -EINVAL;
#endif
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
if (au1000_dma_table[i].dev_id < 0)
......@@ -170,6 +183,13 @@ int request_au1000_dma(int dev_id, const char *dev_str,
chan = &au1000_dma_table[i];
if (dev_id >= DMA_NUM_DEV) {
dev_id -= DMA_NUM_DEV;
dev = &dma_dev_table_bank2[dev_id];
} else {
dev = &dma_dev_table[dev_id];
}
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
......@@ -188,8 +208,8 @@ int request_au1000_dma(int dev_id, const char *dev_str,
chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
chan->fifo_addr = dma_dev_table[dev_id].fifo_addr;
chan->mode = dma_dev_table[dev_id].dma_mode;
chan->fifo_addr = dev->fifo_addr;
chan->mode = dev->dma_mode;
/* initialize the channel before returning */
init_dma(i);
......
arch/mips/au1000/common/irq.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/au1000/common/pci.c
View file @ 12475cc4
......@@ -35,10 +35,6 @@
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
//#include <asm/pb1500.h>
#ifdef CONFIG_MIPS_PB1000
#include <asm/mach-pb1x00/pb1000.h>
#endif
#include <asm/pci_channel.h>
/* TBD */
......@@ -64,13 +60,13 @@ static struct pci_controller au1x_controller = {
.mem_resource = &pci_mem_resource,
};
#ifdef CONFIG_SOC_AU1500
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
static unsigned long virt_io_addr;
#endif
static int __init au1x_pci_setup(void)
{
#ifdef CONFIG_SOC_AU1500
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
int i;
struct pci_dev *dev;
......@@ -93,20 +89,8 @@ static int __init au1x_pci_setup(void)
set_io_port_base(virt_io_addr);
#endif
#ifdef CONFIG_MIPS_PB1000 /* This is truly board specific */
unsigned long pci_mem_start = (unsigned long) PCI_MEM_START;
au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
au_writel(0, SDRAM_MBAR); // set mbar to 0
au_writel(0x2, SDRAM_CMD); // enable memory accesses
au_sync_delay(1);
// set extend byte to mbar of ext slot
au_writel(((pci_mem_start >> 24) & 0xff) |
(1 << 8 | 1 << 9 | 1 << 10 | 1 << 27), PCI_BRIDGE_CONFIG);
#endif
register_pci_controller(&au1x_controller);
return 0;
}
arch_initcall(au1x_pci_setup);
arch/mips/au1000/common/power.c
View file @ 12475cc4
......@@ -358,7 +358,7 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000;
new_baud_base = (new_cpu_freq / 4) / 16;
new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
set_au1x00_speed(new_cpu_freq);
set_au1x00_uart_baud_base(new_baud_base);
......
arch/mips/au1000/common/reset.c
View file @ 12475cc4
......@@ -121,6 +121,29 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x03000000: /* Au1550 */
au_writel(0x00, 0xb1a00004); /* psc 0 */
au_writel(0x00, 0xb1b00004); /* psc 1 */
au_writel(0x00, 0xb0a00004); /* psc 2 */
au_writel(0x00, 0xb0b00004); /* psc 3 */
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb1520000); /* macen0 */
au_writel(0x00, 0xb1520004); /* macen1 */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
default:
break;
......@@ -137,12 +160,28 @@ void au1000_restart(char *command)
au_writel(0x00000000, 0xAE00001C);
#endif
#if defined(CONFIG_MIPS_PB1550)
/* reset entire system */
au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
au_sync();
#endif
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550)
/* power off system */
printk("\n** Powering off Pb1550\n");
au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
au_sync();
while(1); /* should not get here */
#endif
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
#endif
#ifdef CONFIG_PM
au_sleep();
......
arch/mips/au1000/common/setup.c
View file @ 12475cc4
......@@ -56,7 +56,7 @@ extern void (*board_time_init)(void);
extern void au1x_time_init(void);
extern void (*board_timer_setup)(struct irqaction *irq);
extern void au1x_timer_setup(struct irqaction *irq);
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
#if defined(CONFIG_64BIT_PHYS_ADDR) && (defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550))
extern phys_t (*fixup_bigphys_addr)(phys_t phys_addr, phys_t size);
static phys_t au1500_fixup_bigphys_addr(phys_t phys_addr, phys_t size);
#endif
......@@ -66,12 +66,47 @@ extern void au1xxx_timer_setup(struct irqaction *irq);
static int __init au1x00_setup(void)
{
char *argptr;
unsigned long prid, cpupll, bclk = 1;
/* Various early Au1000 Errata corrected by this */
set_c0_config(1<<19); /* Config[OD] */
board_setup(); /* board specific setup */
prid = read_c0_prid();
switch (prid)
{
case 0x00030100: printk("Au1000 DA "); bclk = 0; break;
case 0x00030201: printk("Au1000 HA "); bclk = 0; break;
case 0x00030202: printk("Au1000 HB "); bclk = 0; break;
case 0x00030203: printk("Au1000 HC "); break;
case 0x00030204: printk("Au1000 HD "); break;
case 0x01030200: printk("Au1500 AB "); break;
case 0x01030201: printk("Au1500 AC "); break;
case 0x01030202: printk("Au1500 AD "); break;
case 0x02030200: printk("Au1100 AB "); break;
case 0x02030201: printk("Au1100 BA "); break;
case 0x02030202: printk("Au1100 BC "); break;
case 0x02030203: printk("Au1100 BD "); break;
case 0x02030204: printk("Au1100 BE "); break;
case 0x03030200: printk("Au1550 AA "); break;
default: printk("Unknown Au1x00! "); bclk = 0; break;
}
cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
printk("(PRId %08X) @ %dMHZ\n", prid, cpupll);
if (bclk)
{
/* Enable BCLK switching */
bclk = au_readl(0xB190003C);
au_writel(bclk | 0x60, 0xB190003C);
printk("BCLK switching enabled!\n");
}
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
......@@ -122,7 +157,7 @@ static int __init au1x00_setup(void)
_machine_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
board_timer_setup = au1xxx_timer_setup;
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
#if defined(CONFIG_64BIT_PHYS_ADDR) && (defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550))
fixup_bigphys_addr = au1500_fixup_bigphys_addr;
#endif
......@@ -173,7 +208,7 @@ static int __init au1x00_setup(void)
early_initcall(au1x00_setup);
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
#if defined(CONFIG_64BIT_PHYS_ADDR) && (defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550))
/* This routine should be valid for all Au1500 based boards */
static phys_t au1500_fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
......
arch/mips/au1000/csb250/Makefile
View file @ 12475cc4
......@@ -5,10 +5,4 @@
# Makefile for the Cogent CSB250 Au1500 board. Copied from Pb1500.
#
USE_STANDARD_AS_RULE := true
O_TARGET := csb250.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
arch/mips/au1000/csb250/irqmap.c
View file @ 12475cc4
......@@ -48,53 +48,13 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/db1x00/Makefile
View file @ 12475cc4
......@@ -6,3 +6,4 @@
# Makefile for the Alchemy Semiconductor Db1x00 board.
lib-y := init.o board_setup.o irqmap.o
obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
arch/mips/au1000/db1x00/board_setup.c
View file @ 12475cc4
......@@ -45,6 +45,7 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
/* not correct for db1550 */
static BCSR * const bcsr = (BCSR *)0xAE000000;
void __init board_setup(void)
......@@ -52,6 +53,7 @@ void __init board_setup(void)
u32 pin_func;
pin_func = 0;
/* not valid for 1550 */
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
......@@ -69,6 +71,35 @@ void __init board_setup(void)
#endif
au_writel(0, 0xAE000010); /* turn off pcmcia power */
#ifdef CONFIG_MIPS_MIRAGE
/* enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
/* GPIO[20] is output, tristate the other input primary GPIO's */
au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
/* set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
/* set GPIO[215:211] for LED's */
pin_func |= (u32)((5<<2));
/* set GPIO[214:213] for more LED's */
pin_func |= (u32)((5<<12));
/* set GPIO[207:200] instead of PCMCIA/LCD */
pin_func |= (u32)((3<<17));
au_writel(pin_func, SYS_PINFUNC);
/* Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
au_writel(0x02000200, GPIO2_OUTPUT);
#endif
au_sync();
#ifdef CONFIG_MIPS_DB1000
printk("AMD Alchemy Au1000/Db1000 Board\n");
#endif
......@@ -84,4 +115,7 @@ void __init board_setup(void)
#ifdef CONFIG_MIPS_MIRAGE
printk("AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
printk("AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
arch/mips/au1000/db1x00/irqmap.c
View file @ 12475cc4
......@@ -49,75 +49,24 @@
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_MIRAGE)
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#endif
#ifndef CONFIG_MIPS_MIRAGE
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
#endif
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
#else
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
#ifdef CONFIG_SOC_AU1500
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
#endif
#ifdef CONFIG_MIPS_DB1500
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
#else
{ AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
#endif
#ifndef CONFIG_MIPS_MIRAGE
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 Fully_Interted#
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG#
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 Fully_Interted#
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 STSCHG#
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
#endif
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/db1x00/mirage_ts.c 0 → 100644
View file @ 12475cc4
/*
* linux/arch/mips/au1000/db1x00/mirage_ts.c
*
* BRIEF MODULE DESCRIPTION
* Glue between Mirage board-specific touchscreen pieces
* and generic Wolfson Codec touchscreen support.
*
* Based on pb1100_ts.c used in Hydrogen II.
*
* Copyright (c) 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <asm/segment.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
#include <asm/au1000.h>
/*
* Imported interface to Wolfson Codec driver.
*/
extern void *wm97xx_ts_get_handle(int which);
extern int wm97xx_ts_ready(void* ts_handle);
extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans);
extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg);
extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val);
extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure);
extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z);
int wm97xx_comodule_present = 1;
#define TS_NAME "mirage_ts"
#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
#define DPRINTK(format, arg...) printk(__FUNCTION__ ": " format "\n" , ## arg)
#define PEN_DOWN_IRQ AU1000_GPIO_7
static struct task_struct *ts_task = 0;
static DECLARE_COMPLETION(ts_complete);
static DECLARE_WAIT_QUEUE_HEAD(pendown_wait);
#ifdef CONFIG_WM97XX_FIVEWIRETS
static int release_pressure = 1;
#else
static int release_pressure = 50;
#endif
typedef struct {
long x;
long y;
} DOWN_EVENT;
#define SAMPLE_RATE 50 /* samples per second */
#define PEN_DEBOUNCE 5 /* samples for settling - fn of SAMPLE_RATE */
#define PEN_UP_TIMEOUT 10 /* in seconds */
#define PEN_UP_SETTLE 5 /* samples per second */
static struct {
int xscale;
int xtrans;
int yscale;
int ytrans;
} mirage_ts_cal =
{
#if 0
xscale: 84,
xtrans: -157,
yscale: 66,
ytrans: -150,
#else
xscale: 84,
xtrans: -150,
yscale: 66,
ytrans: -146,
#endif
};
static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs)
{
//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD));
wake_up(&pendown_wait);
}
static int ts_thread(void *id)
{
static int pen_was_down = 0;
static DOWN_EVENT pen_xy;
long x, y, z;
void *ts; /* handle */
struct task_struct *tsk = current;
int timeout = HZ / SAMPLE_RATE;
ts_task = tsk;
daemonize();
tsk->tty = NULL;
tsk->policy = SCHED_FIFO;
tsk->rt_priority = 1;
strcpy(tsk->comm, "touchscreen");
/* only want to receive SIGKILL */
spin_lock_irq(&tsk->sigmask_lock);
siginitsetinv(&tsk->blocked, sigmask(SIGKILL));
recalc_sigpending(tsk);
spin_unlock_irq(&tsk->sigmask_lock);
/* get handle for codec */
ts = wm97xx_ts_get_handle(0);
/* proceed only after everybody is ready */
while ( ! wm97xx_ts_ready(ts) ) {
/* give a little time for initializations to complete */
interruptible_sleep_on_timeout(&pendown_wait, HZ / 4);
}
/* board-specific calibration */
wm97xx_ts_set_cal(ts,
mirage_ts_cal.xscale,
mirage_ts_cal.xtrans,
mirage_ts_cal.yscale,
mirage_ts_cal.ytrans);
/* route Wolfson pendown interrupts to our GPIO */
au_sync();
wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008);
au_sync();
wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008);
au_sync();
wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008);
au_sync();
for (;;) {
interruptible_sleep_on_timeout(&pendown_wait, timeout);
disable_irq(PEN_DOWN_IRQ);
if (signal_pending(tsk)) {
break;
}
/* read codec */
if (!wm97xx_ts_read_data(ts, &x, &y, &z))
z = 0; /* treat no-data and pen-up the same */
if (signal_pending(tsk)) {
break;
}
if (z >= release_pressure) {
y = ~y; /* top to bottom */
if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX
/* bounce ? */
x = pen_xy.x;
y = pen_xy.y;
--pen_was_down;
} else if (pen_was_down <= 1) {
pen_xy.x = x;
pen_xy.y = y;
if (pen_was_down)
wm97xx_ts_send_data(ts, x, y, z);
pen_was_down = PEN_DEBOUNCE;
}
//wm97xx_ts_send_data(ts, x, y, z);
timeout = HZ / SAMPLE_RATE;
} else {
if (pen_was_down) {
if (--pen_was_down)
z = release_pressure;
else //THXXX
wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z);
}
/* The pendown signal takes some time to settle after
* reading the pen pressure so wait a little
* before enabling the pen.
*/
if (! pen_was_down) {
// interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE);
timeout = HZ * PEN_UP_TIMEOUT;
}
}
enable_irq(PEN_DOWN_IRQ);
}
enable_irq(PEN_DOWN_IRQ);
ts_task = NULL;
complete(&ts_complete);
return 0;
}
static int __init ts_mirage_init(void)
{
int ret;
/* pen down signal is connected to GPIO 7 */
ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL);
if (ret) {
err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret);
return ret;
}
lock_kernel();
ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES);
if (ret < 0) {
unlock_kernel();
return ret;
}
unlock_kernel();
info("Mirage touchscreen IRQ initialized.");
return 0;
}
static void __exit ts_mirage_exit(void)
{
if (ts_task) {
send_sig(SIGKILL, ts_task, 1);
wait_for_completion(&ts_complete);
}
free_irq(PEN_DOWN_IRQ, NULL);
}
module_init(ts_mirage_init);
module_exit(ts_mirage_exit);
arch/mips/au1000/hydrogen3/Makefile
View file @ 12475cc4
......@@ -6,13 +6,4 @@
# Makefile for the Alchemy Semiconductor PB1000 board.
#
.S.s:
$(CPP) $(CFLAGS) $< -o $*.s
.S.o:
$(CC) $(CFLAGS) -c $< -o $*.o
O_TARGET := hydrogen3.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
arch/mips/au1000/hydrogen3/board_setup.c
View file @ 12475cc4
......@@ -44,7 +44,6 @@
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/db1x00.h>
extern struct rtc_ops no_rtc_ops;
......
arch/mips/au1000/hydrogen3/irqmap.c
View file @ 12475cc4
......@@ -48,43 +48,9 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
// { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
/* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
{ AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/mtx-1/irqmap.c
View file @ 12475cc4
......@@ -47,47 +47,10 @@
#include <asm/system.h>
#include <asm/au1000.h>
/* Need to define this.
*/
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ 0. 0. 0}
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
int au1xxx_nr_irqs = 0;
arch/mips/au1000/pb1000/irqmap.c
View file @ 12475cc4
......@@ -48,49 +48,7 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/pb1100/irqmap.c
View file @ 12475cc4
......@@ -48,53 +48,10 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
{ AU1000_GPIO_23, INTC_INT_LOW_LEVEL, 0 }, // 2-wire SCL
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/pb1500/irqmap.c
View file @ 12475cc4
......@@ -48,53 +48,11 @@
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/pb1550/Makefile
View file @ 12475cc4
......@@ -6,13 +6,4 @@
# Makefile for the Alchemy Semiconductor PB1000 board.
#
.S.s:
$(CPP) $(CFLAGS) $< -o $*.s
.S.o:
$(CC) $(CFLAGS) -c $< -o $*.o
O_TARGET := pb1550.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
lib-y := init.o board_setup.o irqmap.o
arch/mips/au1000/pb1550/board_setup.c
View file @ 12475cc4
......@@ -39,29 +39,26 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/db1x00.h>
extern struct rtc_ops no_rtc_ops;
static BCSR * const bcsr = (BCSR *)0xB3000000;
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
void __init board_setup(void)
{
u32 pin_func;
rtc_ops = &no_rtc_ops;
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
/* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
#endif
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
printk("AMD Alchemy Pb1550 Board\n");
printk("AMD Alchemy Pb1550 Board\n");
}
arch/mips/au1000/pb1550/init.c
View file @ 12475cc4
......@@ -27,17 +27,14 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
......@@ -46,28 +43,27 @@ extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
return "AMD Alchemy PbAu1550";
return "Alchemy Pb1550";
}
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = argc;
prom_argv = argv;
prom_envp = envp;
prom_argc = (int) fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1000; /* set the platform # */
prom_init_cmdline();
mips_machtype = MACH_PB1550;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
memsize = 0x04000000;
memsize = 0x08000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
return 0;
}
arch/mips/au1000/pb1550/irqmap.c
View file @ 12475cc4
......@@ -45,49 +45,11 @@
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/au1000.h>
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH0_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH1_INT,INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1550_TOY_MATCH2_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH0_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH1_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH2_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH2_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
/*
* Need to define platform dependant GPIO ints here
*/
#warning PbAu1550 needs GPIO Interrupts defined
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/xxs1500/irqmap.c
View file @ 12475cc4
......@@ -48,29 +48,7 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
......@@ -83,24 +61,6 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/baget/baget.c
View file @ 12475cc4
......@@ -12,7 +12,6 @@
#include <asm/bootinfo.h>
#include <asm/mipsregs.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/baget/baget.h>
......
arch/mips/configs/atlas_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_IOSCHED_DEADLINE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
CONFIG_MIPS_ATLAS=y
# CONFIG_MIPS_MALTA is not set
......@@ -122,7 +122,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -165,6 +164,7 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
......@@ -198,6 +198,12 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
......@@ -246,7 +252,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -255,10 +261,6 @@ CONFIG_SCSI_QLA2XXX=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -282,7 +284,6 @@ CONFIG_IP_PNP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -297,7 +298,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -384,6 +384,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -404,11 +405,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -474,12 +477,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -491,7 +490,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -511,6 +509,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -581,7 +583,6 @@ CONFIG_EXT2_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -594,6 +595,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -617,7 +619,7 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
arch/mips/configs/bosporus_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -117,12 +117,12 @@ CONFIG_CPU_HAS_SYNC=y
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
#
......@@ -167,7 +167,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -190,7 +189,7 @@ CONFIG_BLK_DEV_LOOP=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -198,10 +197,6 @@ CONFIG_BLK_DEV_LOOP=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -226,7 +221,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -257,7 +251,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -320,6 +313,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -353,11 +347,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -417,12 +413,8 @@ CONFIG_HW_CONSOLE=y
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -434,7 +426,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -458,6 +449,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -537,7 +532,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -550,6 +544,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -574,7 +569,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -662,7 +657,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
arch/mips/configs/capcella_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -62,7 +63,6 @@ CONFIG_ZAO_CAPCELLA=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -126,7 +126,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -167,8 +166,8 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -211,9 +210,10 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -222,10 +222,6 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -250,7 +246,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -265,7 +260,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -351,6 +345,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -371,11 +366,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -441,12 +438,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -470,7 +463,6 @@ CONFIG_WATCHDOG=y
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -490,6 +482,10 @@ CONFIG_WATCHDOG=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -560,7 +556,6 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -573,6 +568,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -597,7 +593,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
arch/mips/configs/cobalt_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_MIPS_COBALT=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -118,7 +118,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -160,8 +159,8 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -204,9 +203,10 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -215,10 +215,6 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -239,7 +235,6 @@ CONFIG_INET=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -254,7 +249,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -340,6 +334,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -360,11 +355,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -430,12 +427,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=16
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -447,7 +440,6 @@ CONFIG_UNIX98_PTY_COUNT=16
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -466,6 +458,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -540,7 +536,6 @@ CONFIG_FS_POSIX_ACL=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -553,6 +548,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -574,7 +570,7 @@ CONFIG_NFS_FS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
arch/mips/configs/db1000_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -75,12 +75,15 @@ CONFIG_SOC_AU1X00=y
CONFIG_SOC_AU1000=y
# CONFIG_SOC_AU1100 is not set
# CONFIG_SOC_AU1500 is not set
# CONFIG_SOC_AU1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
CONFIG_MIPS_DB1000=y
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_XXS1500 is not set
......@@ -132,12 +135,12 @@ CONFIG_CPU_HAS_SYNC=y
#
# CONFIG_PCI is not set
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
......@@ -183,7 +186,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -206,7 +208,7 @@ CONFIG_BLK_DEV_LOOP=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -214,10 +216,6 @@ CONFIG_BLK_DEV_LOOP=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -242,7 +240,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -273,7 +270,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -337,6 +333,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -370,11 +367,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -440,12 +439,8 @@ CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -457,7 +452,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -481,6 +475,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -560,7 +558,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -573,6 +570,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -597,7 +595,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -685,7 +683,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
arch/mips/configs/db1100_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -75,12 +75,15 @@ CONFIG_SOC_AU1X00=y
# CONFIG_SOC_AU1000 is not set
CONFIG_SOC_AU1100=y
# CONFIG_SOC_AU1500 is not set
# CONFIG_SOC_AU1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_DB1000 is not set
CONFIG_MIPS_DB1100=y
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_XXS1500 is not set
......@@ -131,12 +134,12 @@ CONFIG_CPU_HAS_SYNC=y
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
......@@ -182,7 +185,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -205,7 +207,7 @@ CONFIG_BLK_DEV_LOOP=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -213,10 +215,6 @@ CONFIG_BLK_DEV_LOOP=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -241,7 +239,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -272,7 +269,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -336,6 +332,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -369,11 +366,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -436,12 +435,8 @@ CONFIG_HW_CONSOLE=y
#
# CONFIG_SERIAL_AU1X00 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -453,7 +448,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -477,6 +471,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -556,7 +554,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -569,6 +566,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -593,7 +591,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -681,7 +679,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
arch/mips/configs/db1500_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -75,12 +75,15 @@ CONFIG_SOC_AU1X00=y
# CONFIG_SOC_AU1000 is not set
# CONFIG_SOC_AU1100 is not set
CONFIG_SOC_AU1500=y
# CONFIG_SOC_AU1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
CONFIG_MIPS_DB1500=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_XXS1500 is not set
......@@ -132,12 +135,12 @@ CONFIG_CPU_HAS_SYNC=y
#
# CONFIG_PCI is not set
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
......@@ -240,7 +243,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -285,7 +287,7 @@ CONFIG_IDE_GENERIC=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -293,10 +295,6 @@ CONFIG_IDE_GENERIC=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -321,7 +319,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -352,7 +349,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -416,6 +412,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -449,11 +446,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -517,12 +516,8 @@ CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -534,7 +529,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -558,6 +552,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -630,7 +628,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -643,6 +640,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -669,7 +667,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -757,7 +755,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
arch/mips/configs/ddb5476_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_IOSCHED_DEADLINE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -117,8 +117,8 @@ CONFIG_CPU_HAS_SYNC=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -148,19 +148,21 @@ CONFIG_TRAD_SIGNALS=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -186,6 +188,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -195,6 +198,11 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
......@@ -203,9 +211,10 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -214,10 +223,6 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -241,7 +246,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -256,7 +260,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -300,13 +303,20 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
......@@ -342,6 +352,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -362,11 +373,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -432,12 +445,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -449,7 +458,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -469,6 +477,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -482,6 +494,7 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# Graphics support
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_RIVA is not set
......@@ -561,7 +574,6 @@ CONFIG_EXT2_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -574,6 +586,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -596,7 +609,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
arch/mips/configs/ddb5477_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_IOSCHED_DEADLINE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -119,7 +119,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -160,8 +159,8 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -182,9 +181,10 @@ CONFIG_TRAD_SIGNALS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -193,10 +193,6 @@ CONFIG_TRAD_SIGNALS=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -220,7 +216,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -235,7 +230,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -340,6 +334,7 @@ CONFIG_PCNET32=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -360,11 +355,13 @@ CONFIG_PCNET32=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -430,12 +427,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -447,7 +440,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -467,6 +459,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -537,7 +533,6 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -550,6 +545,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -574,7 +570,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
arch/mips/configs/decstation_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_MACH_DECSTATION=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -118,7 +118,6 @@ CONFIG_CPU_HAS_WB=y
#
CONFIG_TC=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -156,7 +155,6 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -187,6 +185,12 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
......@@ -205,10 +209,9 @@ CONFIG_SCSI_DECNCR=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -216,10 +219,6 @@ CONFIG_SCSI_DECNCR=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -243,7 +242,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -258,7 +256,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -315,6 +312,7 @@ CONFIG_DECLANCE=y
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -335,11 +333,13 @@ CONFIG_DECLANCE=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -403,12 +403,8 @@ CONFIG_SERIAL_DZ_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -420,7 +416,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -440,6 +435,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -513,7 +512,6 @@ CONFIG_FS_POSIX_ACL=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -526,6 +524,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......
arch/mips/configs/e55_defconfig
View file @ 12475cc4
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -62,7 +63,6 @@ CONFIG_CASIO_E55=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -122,8 +122,8 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_ISA=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -153,15 +153,16 @@ CONFIG_TRAD_SIGNALS=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -186,6 +187,7 @@ CONFIG_IDE_TASKFILE_IO=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -195,6 +197,11 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
......@@ -205,7 +212,7 @@ CONFIG_IDE_GENERIC=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -213,10 +220,6 @@ CONFIG_IDE_GENERIC=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -238,7 +241,6 @@ CONFIG_IP_MULTICAST=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -253,7 +255,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -278,6 +279,11 @@ CONFIG_IPV6_SCTP__=y
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
......@@ -289,6 +295,16 @@ CONFIG_NETDEVICES=y
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
......@@ -308,7 +324,9 @@ CONFIG_NET_ETHERNET=y
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -329,11 +347,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -398,12 +418,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -421,7 +437,13 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_NVRAM is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -441,6 +463,10 @@ CONFIG_WATCHDOG=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -510,7 +536,6 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -523,6 +548,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -546,7 +572,7 @@ CONFIG_NFSD=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
arch/mips/configs/eagle_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/ev64120_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/ev96100_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/ip22_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/ip27_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/ip32_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/it8172_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/ivr_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/jaguar-atx_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/jmr3927_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/lasat200_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/malta_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/mirage_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/mpc30x_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/mtx1_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/ocelot_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/osprey_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/pb1000_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/pb1100_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/pb1500_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/rm200_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/sb1250-swarm_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/sead_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/tb0226_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/tb0229_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/workpad_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/xxs1500_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/configs/yosemite_defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/ddb5xxx/common/irq.c
View file @ 12475cc4
......@@ -17,15 +17,27 @@
void (*irq_setup)(void);
#ifdef CONFIG_KGDB
static int kgdb_flag = 1;
static int __init nokgdb(char *str)
{
kgdb_flag = 0;
return 1;
}
__setup("nokgdb", nokgdb);
#endif
void __init init_IRQ(void)
{
#ifdef CONFIG_KGDB
extern void breakpoint(void);
extern void set_debug_traps(void);
printk("Wait for gdb client connection ...\n");
set_debug_traps();
breakpoint();
if (kgdb_flag) {
printk("Wait for gdb client connection ...\n");
set_debug_traps();
breakpoint();
}
#endif
/* set up default irq controller */
init_generic_irq();
......
arch/mips/defconfig
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/Makefile
View file @ 12475cc4
......@@ -37,6 +37,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_MIPS_MV64340) += irq-mv6434x.o
obj-$(CONFIG_MIPS32) += scall32-o32.o
obj-$(CONFIG_MIPS64) += scall64-64.o
......@@ -54,5 +55,6 @@ obj-$(CONFIG_MIPS64) += cpu-bugs64.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
CFLAGS_ioctl32.o += -Ifs/
EXTRA_AFLAGS := $(CFLAGS)
arch/mips/kernel/cpu-probe.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/entry.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/ioctl32.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/irixelf.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/irq-rm7000.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/linux32.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/module-elf64.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/proc.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/r2300_switch.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/r4k_fpu.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/r4k_switch.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/scall64-n32.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/signal.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/signal32.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/signal_n32.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/syscall.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/sysirix.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/kernel/traps.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/at93c.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/ds1603.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/image/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/interrupt.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/lasatIRQ.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/pci.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/lasat/prom.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/lasat/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm-32/tlbex-r4k.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm-64/tlbex-r4k.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/c-r3k.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/c-r4k.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/c-sb1.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/c-tx39.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/cache.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/cex-sb1.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/dma-coherent.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/dma-ip27.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/dma-noncoherent.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/fault.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/highmem.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/init.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/ioremap.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/pg-r4k.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/pgtable-64.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/sc-ip22.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/sc-r5k.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/sc-rm7k.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/tlb-andes.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/mm/tlb-r4k.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/jaguar_atx/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/jaguar_atx/int-handler.S
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/jaguar_atx/irq.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/jaguar_atx/ja-console.c 0 → 100644
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/jaguar_atx/pci-irq.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/momentum/jaguar_atx/pci.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/momentum/jaguar_atx/prom.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/jaguar_atx/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/ocelot_c/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/ocelot_c/irq.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/ocelot_c/mv-irq.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/momentum/ocelot_c/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/momentum/ocelot_g/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/fixup-au1000.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/fixup-lasat.c 0 → 100644
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/fixup-mv64340.c 0 → 100644
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/ops-au1000.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/ops-mv64340.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/pci-ip27.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/pci-lasat.c 0 → 100644
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/pci-sb1250.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pci/pci-vr41xx.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/ht.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/i2c-yosemite.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/irq.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/prom.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/pmc-sierra/yosemite/smp.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/ip27-hubio.c 0 → 100644
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/ip27-init.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/ip27-irq.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/ip27-memory.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/ip27-nmi.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/ip27-smp.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip27/ip27-timer.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip32/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip32/ip32-irq.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip32/ip32-setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sgi-ip32/ip32-timer.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/sibyte/sb1250/smp.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/sibyte/swarm/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/tx4927/common/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/casio-e55/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/casio-e55/init.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/vr41xx/casio-e55/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/common/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/common/cmu.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/common/giu.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/common/init.c 0 → 100644
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/common/rtc.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/common/serial.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/ibm-workpad/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/ibm-workpad/init.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/vr41xx/ibm-workpad/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/nec-eagle/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/nec-eagle/init.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/vr41xx/nec-eagle/irq.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/nec-eagle/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/tanbac-tb0226/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/tanbac-tb0226/init.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/vr41xx/tanbac-tb0226/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/tanbac-tb0229/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/tanbac-tb0229/init.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/vr41xx/tanbac-tb0229/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/victor-mpc30x/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/victor-mpc30x/init.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/vr41xx/victor-mpc30x/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/zao-capcella/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/mips/vr41xx/zao-capcella/init.c deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
arch/mips/vr41xx/zao-capcella/setup.c
View file @ 12475cc4
This diff is collapsed.
arch/ppc/kernel/misc.S
View file @ 12475cc4
This diff is collapsed.
arch/ppc/kernel/process.c
View file @ 12475cc4
This diff is collapsed.
arch/ppc64/kernel/misc.S
View file @ 12475cc4
This diff is collapsed.
arch/ppc64/kernel/signal32.c
View file @ 12475cc4
This diff is collapsed.
arch/ppc64/mm/hugetlbpage.c
View file @ 12475cc4
This diff is collapsed.
arch/sh/mm/hugetlbpage.c
View file @ 12475cc4
This diff is collapsed.
arch/sparc/kernel/entry.S
View file @ 12475cc4
This diff is collapsed.
arch/sparc/kernel/process.c
View file @ 12475cc4
This diff is collapsed.
arch/sparc/kernel/systbls.S
View file @ 12475cc4
This diff is collapsed.
arch/sparc64/kernel/Makefile
View file @ 12475cc4
This diff is collapsed.
arch/sparc64/kernel/binfmt_elf32.c
View file @ 12475cc4
This diff is collapsed.
arch/sparc64/kernel/entry.S
View file @ 12475cc4
This diff is collapsed.
arch/sparc64/kernel/sys32.S
View file @ 12475cc4
This diff is collapsed.
arch/sparc64/kernel/systbls.S
View file @ 12475cc4
This diff is collapsed.
arch/sparc64/mm/hugetlbpage.c
View file @ 12475cc4
This diff is collapsed.
drivers/block/cfq-iosched.c
View file @ 12475cc4
This diff is collapsed.
drivers/block/loop.c
View file @ 12475cc4
This diff is collapsed.
drivers/char/hw_random.c
View file @ 12475cc4
This diff is collapsed.
drivers/ide/ide.c
View file @ 12475cc4
This diff is collapsed.
drivers/input/serio/serio.c
View file @ 12475cc4
This diff is collapsed.
drivers/md/md.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/3c509.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/3c515.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/8139too.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/Kconfig
View file @ 12475cc4
This diff is collapsed.
drivers/net/amd8111e.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/arm/etherh.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/e1000/e1000_ethtool.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/hamradio/baycom_par.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/irda/donauboe.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/irda/sir_kthread.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/irda/stir4200.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/irda/vlsi_ir.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/mace.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/pcmcia/3c589_cs.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/pcmcia/ibmtr_cs.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/r8169.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/rcpci45.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/saa9730.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/sk98lin/skge.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tc35815.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tokenring/3c359.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tokenring/abyss.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tokenring/lanstreamer.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tokenring/olympic.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tokenring/tmspci.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tulip/de2104x.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tulip/timer.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/tulip/tulip_core.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/wan/pc300_drv.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/wan/sbni.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/wan/sdla.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/wireless/airo.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/wireless/orinoco_pci.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/wireless/orinoco_plx.c
View file @ 12475cc4
This diff is collapsed.
drivers/net/wireless/orinoco_tmd.c
View file @ 12475cc4
This diff is collapsed.
drivers/pcmcia/cs.c
View file @ 12475cc4
This diff is collapsed.
drivers/scsi/libata-core.c
View file @ 12475cc4
This diff is collapsed.
drivers/scsi/scsi_error.c
View file @ 12475cc4
This diff is collapsed.
drivers/serial/Kconfig
View file @ 12475cc4
This diff is collapsed.
drivers/usb/core/hub.c
View file @ 12475cc4
This diff is collapsed.
drivers/usb/storage/usb.c
View file @ 12475cc4
This diff is collapsed.
fs/binfmt_elf.c
View file @ 12475cc4
This diff is collapsed.
fs/block_dev.c
View file @ 12475cc4
This diff is collapsed.
fs/direct-io.c
View file @ 12475cc4
This diff is collapsed.
fs/ext2/inode.c
View file @ 12475cc4
This diff is collapsed.
fs/ext3/inode.c
View file @ 12475cc4
This diff is collapsed.
fs/hfs/COPYING deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
fs/hfs/inode.c
View file @ 12475cc4
This diff is collapsed.
fs/hfsplus/inode.c
View file @ 12475cc4
This diff is collapsed.
fs/jbd/journal.c
View file @ 12475cc4
This diff is collapsed.
fs/jfs/inode.c
View file @ 12475cc4
This diff is collapsed.
fs/jfs/jfs_logmgr.c
View file @ 12475cc4
This diff is collapsed.
fs/jfs/jfs_txnmgr.c
View file @ 12475cc4
This diff is collapsed.
fs/nfs/direct.c
View file @ 12475cc4
This diff is collapsed.
fs/nfs/nfsroot.c
View file @ 12475cc4
This diff is collapsed.
fs/proc/generic.c
View file @ 12475cc4
This diff is collapsed.
fs/proc/inode-alloc.txt
View file @ 12475cc4
This diff is collapsed.
fs/proc/inode.c
View file @ 12475cc4
This diff is collapsed.
fs/reiserfs/inode.c
View file @ 12475cc4
This diff is collapsed.
fs/reiserfs/journal.c
View file @ 12475cc4
This diff is collapsed.
fs/xfs/linux/xfs_aops.c
View file @ 12475cc4
This diff is collapsed.
fs/xfs/linux/xfs_buf.c
View file @ 12475cc4
This diff is collapsed.
fs/xfs/linux/xfs_super.c
View file @ 12475cc4
This diff is collapsed.
include/asm-alpha/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-arm/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-arm26/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-generic/cpumask_array.h
View file @ 12475cc4
This diff is collapsed.
include/asm-h8300/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-i386/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-ia64/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-m68k/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-m68knommu/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/asm.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/bootinfo.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/cacheflush.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/dma-mapping.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/hardirq.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/hazards.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/highmem.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/ip32/ip32_ints.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/ip32/mace.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/lasat/lasat.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-atlas/mc146818rtc.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-au1x00/au1000.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-au1x00/au1000_dma.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-au1x00/au1000_pcmcia.h deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
include/asm-mips/mach-au1x00/au1100_mmc.h 0 → 100644
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-au1x00/au1xxx_dbdma.h 0 → 100644
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-au1x00/au1xxx_psc.h 0 → 100644
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-db1x00/db1x00.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-generic/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-generic/spaces.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-generic/topology.h 0 → 100644
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-ip27/mmzone.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-ip27/spaces.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-ip27/topology.h 0 → 100644
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-ip32/mc146818rtc.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-ja/cpu-feature-overrides.h 0 → 100644
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-mips/mc146818rtc.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mach-pb1x00/pb1550.h 0 → 100644
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mc146818-time.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mipsregs.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mmu_context.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/module.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mv64340.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/mv64340_dep.h deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
include/asm-mips/page-64.h deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
include/asm-mips/page.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/pgalloc.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/pgtable-64.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/prefetch.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/processor.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/serial.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/sibyte/board.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/smp.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/sn/agent.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/sn/arch.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/sn/hub.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/sn/intr_public.h deleted 100644 → 0
View file @ fa31b02f
This diff is collapsed.
include/asm-mips/sn/io.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/sn/sn0/arch.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/sn/sn_private.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/spinlock.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/stackframe.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/topology.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/uaccess.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/unistd.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/vr41xx/e55.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/vr41xx/vr41xx.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/vr41xx/workpad.h
View file @ 12475cc4
This diff is collapsed.
include/asm-mips/war.h
View file @ 12475cc4
This diff is collapsed.
include/asm-parisc/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-ppc/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-ppc/unistd.h
View file @ 12475cc4
This diff is collapsed.
include/asm-ppc64/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-ppc64/unistd.h
View file @ 12475cc4
This diff is collapsed.
include/asm-sh/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-sparc/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-sparc/unistd.h
View file @ 12475cc4
This diff is collapsed.
include/asm-sparc64/ide.h
View file @ 12475cc4
This diff is collapsed.
include/asm-sparc64/system.h
View file @ 12475cc4
This diff is collapsed.
include/asm-sparc64/unistd.h
View file @ 12475cc4
This diff is collapsed.
include/asm-x86_64/ide.h
View file @ 12475cc4
This diff is collapsed.
include/linux/fs.h
View file @ 12475cc4
This diff is collapsed.
include/linux/hugetlb.h
View file @ 12475cc4
This diff is collapsed.
include/linux/ide.h
View file @ 12475cc4
This diff is collapsed.
include/linux/idr.h
View file @ 12475cc4
This diff is collapsed.
include/linux/list.h
View file @ 12475cc4
This diff is collapsed.
include/linux/mm.h
View file @ 12475cc4
This diff is collapsed.
include/linux/nfs_fs.h
View file @ 12475cc4
This diff is collapsed.
include/linux/pfkeyv2.h
View file @ 12475cc4
This diff is collapsed.
include/linux/proc_fs.h
View file @ 12475cc4
This diff is collapsed.
include/linux/sched.h
View file @ 12475cc4
This diff is collapsed.
include/net/sock.h
View file @ 12475cc4
This diff is collapsed.
kernel/module.c
View file @ 12475cc4
This diff is collapsed.
kernel/posix-timers.c
View file @ 12475cc4
This diff is collapsed.
kernel/power/process.c
View file @ 12475cc4
This diff is collapsed.
kernel/sched.c
View file @ 12475cc4
This diff is collapsed.
kernel/signal.c
View file @ 12475cc4
This diff is collapsed.
kernel/softirq.c
View file @ 12475cc4
This diff is collapsed.
kernel/workqueue.c
View file @ 12475cc4
This diff is collapsed.
lib/idr.c
View file @ 12475cc4
This diff is collapsed.
mm/madvise.c
View file @ 12475cc4
This diff is collapsed.
mm/memory.c
View file @ 12475cc4
This diff is collapsed.
mm/pdflush.c
View file @ 12475cc4
This diff is collapsed.
mm/vmscan.c
View file @ 12475cc4
This diff is collapsed.
net/atm/lec.h
View file @ 12475cc4
This diff is collapsed.
net/bluetooth/bnep/core.c
View file @ 12475cc4
This diff is collapsed.
net/bluetooth/cmtp/core.c
View file @ 12475cc4
This diff is collapsed.
net/bluetooth/rfcomm/core.c
View file @ 12475cc4
This diff is collapsed.
net/core/dev.c
View file @ 12475cc4
This diff is collapsed.
net/ipv6/netfilter/Kconfig
View file @ 12475cc4
This diff is collapsed.
net/key/af_key.c
View file @ 12475cc4
This diff is collapsed.
net/sunrpc/sched.c
View file @ 12475cc4
This diff is collapsed.
net/sunrpc/svcsock.c
View file @ 12475cc4
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7