octeontx2-af: Handle non-contiguous CGX LMAC interfaces

For this, cgx_id(struct cgx) definition has been changed to
reflect cgx port id instead of device instance id.
Now cgx_id can be directly used as channel offset for NPC configuration.
Assumptions on contiguous cgx port ids has been removed from
nix_calibrate_x2p as well.

As a side effect, allocation of conversion tables that were based
on cgx count are changed to cgx port id max value.
Tables would return NULL for invalid cgx ports.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/octeontx2/af/cgx.c

@@ -92,17 +92,21 @@ static inline struct lmac *lmac_pdata(u8 lmac_id, struct cgx *cgx)
 	return cgx->lmac_idmap[lmac_id];
 }
 
-int cgx_get_cgx_cnt(void)
+int cgx_get_cgxcnt_max(void)
 {
 	struct cgx *cgx_dev;
-	int count = 0;
+	int idmax = -ENODEV;
 
 	list_for_each_entry(cgx_dev, &cgx_list, cgx_list)
-		count++;
+		if (cgx_dev->cgx_id > idmax)
+			idmax = cgx_dev->cgx_id;
 
-	return count;
+	if (idmax < 0)
+		return 0;
+
+	return idmax + 1;
 }
-EXPORT_SYMBOL(cgx_get_cgx_cnt);
+EXPORT_SYMBOL(cgx_get_cgxcnt_max);
 
 int cgx_get_lmac_cnt(void *cgxd)
 {
@@ -679,8 +683,10 @@ static int cgx_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_release_regions;
 	}
 
+	cgx->cgx_id = (pci_resource_start(pdev, PCI_CFG_REG_BAR_NUM) >> 24)
+		& CGX_ID_MASK;
+
 	list_add(&cgx->cgx_list, &cgx_list);
-	cgx->cgx_id = cgx_get_cgx_cnt() - 1;
 
 	cgx_link_usertable_init();
 

drivers/net/ethernet/marvell/octeontx2/af/cgx.h

@@ -20,7 +20,7 @@
 /* PCI BAR nos */
 #define PCI_CFG_REG_BAR_NUM		0
 
-#define MAX_CGX				3
+#define CGX_ID_MASK			0x7
 #define MAX_LMAC_PER_CGX		4
 #define CGX_FIFO_LEN			65536 /* 64K for both Rx & Tx */
 #define CGX_OFFSET(x)			((x) * MAX_LMAC_PER_CGX)
@@ -95,7 +95,7 @@ struct cgx_event_cb {
 
 extern struct pci_driver cgx_driver;
 
-int cgx_get_cgx_cnt(void);
+int cgx_get_cgxcnt_max(void);
 int cgx_get_lmac_cnt(void *cgxd);
 void *cgx_get_pdata(int cgx_id);
 int cgx_set_pkind(void *cgxd, u8 lmac_id, int pkind);

drivers/net/ethernet/marvell/octeontx2/af/rvu.h

@@ -226,7 +226,7 @@ struct rvu {
 	/* CGX */
 #define PF_CGXMAP_BASE		1 /* PF 0 is reserved for RVU PF */
 	u8			cgx_mapped_pfs;
-	u8			cgx_cnt; /* available cgx ports */
+	u8			cgx_cnt_max;	 /* CGX port count max */
 	u8			*pf2cgxlmac_map; /* pf to cgx_lmac map */
 	u16			*cgxlmac2pf_map; /* bitmap of mapped pfs for
 						  * every cgx lmac port

drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c

@@ -52,7 +52,7 @@ static inline u8 cgxlmac_id_to_bmap(u8 cgx_id, u8 lmac_id)
 
 void *rvu_cgx_pdata(u8 cgx_id, struct rvu *rvu)
 {
-	if (cgx_id >= rvu->cgx_cnt)
+	if (cgx_id >= rvu->cgx_cnt_max)
 		return NULL;
 
 	return rvu->cgx_idmap[cgx_id];
@@ -61,38 +61,40 @@ void *rvu_cgx_pdata(u8 cgx_id, struct rvu *rvu)
 static int rvu_map_cgx_lmac_pf(struct rvu *rvu)
 {
 	struct npc_pkind *pkind = &rvu->hw->pkind;
-	int cgx_cnt = rvu->cgx_cnt;
+	int cgx_cnt_max = rvu->cgx_cnt_max;
 	int cgx, lmac_cnt, lmac;
 	int pf = PF_CGXMAP_BASE;
 	int size, free_pkind;
 
-	if (!cgx_cnt)
+	if (!cgx_cnt_max)
 		return 0;
 
-	if (cgx_cnt > 0xF || MAX_LMAC_PER_CGX > 0xF)
+	if (cgx_cnt_max > 0xF || MAX_LMAC_PER_CGX > 0xF)
 		return -EINVAL;
 
 	/* Alloc map table
 	 * An additional entry is required since PF id starts from 1 and
 	 * hence entry at offset 0 is invalid.
 	 */
-	size = (cgx_cnt * MAX_LMAC_PER_CGX + 1) * sizeof(u8);
-	rvu->pf2cgxlmac_map = devm_kzalloc(rvu->dev, size, GFP_KERNEL);
+	size = (cgx_cnt_max * MAX_LMAC_PER_CGX + 1) * sizeof(u8);
+	rvu->pf2cgxlmac_map = devm_kmalloc(rvu->dev, size, GFP_KERNEL);
 	if (!rvu->pf2cgxlmac_map)
 		return -ENOMEM;
 
-	/* Initialize offset 0 with an invalid cgx and lmac id */
-	rvu->pf2cgxlmac_map[0] = 0xFF;
+	/* Initialize all entries with an invalid cgx and lmac id */
+	memset(rvu->pf2cgxlmac_map, 0xFF, size);
 
 	/* Reverse map table */
 	rvu->cgxlmac2pf_map = devm_kzalloc(rvu->dev,
-				  cgx_cnt * MAX_LMAC_PER_CGX * sizeof(u16),
+				  cgx_cnt_max * MAX_LMAC_PER_CGX * sizeof(u16),
 				  GFP_KERNEL);
 	if (!rvu->cgxlmac2pf_map)
 		return -ENOMEM;
 
 	rvu->cgx_mapped_pfs = 0;
-	for (cgx = 0; cgx < cgx_cnt; cgx++) {
+	for (cgx = 0; cgx < cgx_cnt_max; cgx++) {
+		if (!rvu_cgx_pdata(cgx, rvu))
+			continue;
 		lmac_cnt = cgx_get_lmac_cnt(rvu_cgx_pdata(cgx, rvu));
 		for (lmac = 0; lmac < lmac_cnt; lmac++, pf++) {
 			rvu->pf2cgxlmac_map[pf] = cgxlmac_id_to_bmap(cgx, lmac);
@@ -234,7 +236,7 @@ static int cgx_lmac_event_handler_init(struct rvu *rvu)
 	cb.notify_link_chg = cgx_lmac_postevent; /* link change call back */
 	cb.data = rvu;
 
-	for (cgx = 0; cgx < rvu->cgx_cnt; cgx++) {
+	for (cgx = 0; cgx <= rvu->cgx_cnt_max; cgx++) {
 		cgxd = rvu_cgx_pdata(cgx, rvu);
 		for (lmac = 0; lmac < cgx_get_lmac_cnt(cgxd); lmac++) {
 			err = cgx_lmac_evh_register(&cb, cgxd, lmac);
@@ -261,20 +263,22 @@ int rvu_cgx_init(struct rvu *rvu)
 {
 	int cgx, err;
 
-	/* find available cgx ports */
-	rvu->cgx_cnt = cgx_get_cgx_cnt();
-	if (!rvu->cgx_cnt) {
+	/* CGX port id starts from 0 and are not necessarily contiguous
+	 * Hence we allocate resources based on the maximum port id value.
+	 */
+	rvu->cgx_cnt_max = cgx_get_cgxcnt_max();
+	if (!rvu->cgx_cnt_max) {
 		dev_info(rvu->dev, "No CGX devices found!\n");
 		return -ENODEV;
 	}
 
-	rvu->cgx_idmap = devm_kzalloc(rvu->dev, rvu->cgx_cnt * sizeof(void *),
-				      GFP_KERNEL);
+	rvu->cgx_idmap = devm_kzalloc(rvu->dev, rvu->cgx_cnt_max *
+				      sizeof(void *), GFP_KERNEL);
 	if (!rvu->cgx_idmap)
 		return -ENOMEM;
 
 	/* Initialize the cgxdata table */
-	for (cgx = 0; cgx < rvu->cgx_cnt; cgx++)
+	for (cgx = 0; cgx < rvu->cgx_cnt_max; cgx++)
 		rvu->cgx_idmap[cgx] = cgx_get_pdata(cgx);
 
 	/* Map CGX LMAC interfaces to RVU PFs */

drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c

@@ -2107,8 +2107,10 @@ static int nix_calibrate_x2p(struct rvu *rvu, int blkaddr)
 
 	status = rvu_read64(rvu, blkaddr, NIX_AF_STATUS);
 	/* Check if CGX devices are ready */
-	for (idx = 0; idx < cgx_get_cgx_cnt(); idx++) {
-		if (status & (BIT_ULL(16 + idx)))
+	for (idx = 0; idx < rvu->cgx_cnt_max; idx++) {
+		/* Skip when cgx port is not available */
+		if (!rvu_cgx_pdata(idx, rvu) ||
+		    (status & (BIT_ULL(16 + idx))))
 			continue;
 		dev_err(rvu->dev,
 			"CGX%d didn't respond to NIX X2P calibration\n", idx);