Commit 131d8106 authored by Mark Brown's avatar Mark Brown

ASoC: Allow user-specified WM8958 multiband compressor configurations

The paramters of the WM8958 multiband compressor can be tuned by the
user for their system using a graphical configuration tool on the host.
Allow the user to specify a set of such paramters in platform data and
select between them at runtime.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: default avatarLiam Girdwood <lrg@slimlogic.co.uk>
parent b2822a8c
......@@ -30,6 +30,8 @@ struct wm8994_ldo_pdata {
#define WM8994_DRC_REGS 5
#define WM8994_EQ_REGS 19
#define WM8958_MBC_CUTOFF_REGS 20
#define WM8958_MBC_COEFF_REGS 48
/**
* DRC configurations are specified with a label and a set of register
......@@ -59,6 +61,18 @@ struct wm8994_retune_mobile_cfg {
u16 regs[WM8994_EQ_REGS];
};
/**
* Multiband compressor configurations are specified with a label and
* two sets of values to write. Configurations are expected to be
* generated using the multiband compressor configuration panel in
* WISCE - see http://www.wolfsonmicro.com/wisce/
*/
struct wm8958_mbc_cfg {
const char *name;
u16 cutoff_regs[WM8958_MBC_CUTOFF_REGS];
u16 coeff_regs[WM8958_MBC_COEFF_REGS];
};
struct wm8994_pdata {
int gpio_base;
......@@ -78,6 +92,9 @@ struct wm8994_pdata {
int num_retune_mobile_cfgs;
struct wm8994_retune_mobile_cfg *retune_mobile_cfgs;
int num_mbc_cfgs;
struct wm8958_mbc_cfg *mbc_cfgs;
/* LINEOUT can be differential or single ended */
unsigned int lineout1_diff:1;
unsigned int lineout2_diff:1;
......
......@@ -258,6 +258,74 @@
#define WM8958_DSP2_VERMAJMIN 0xA04
#define WM8958_DSP2_VERBUILD 0xA05
#define WM8958_DSP2_EXECCONTROL 0xA0D
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1 0x2200
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_2 0x2201
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C2_1 0x2202
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C2_2 0x2203
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C3_1 0x2204
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C3_2 0x2205
#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C2_1 0x2206
#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C2_2 0x2207
#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C3_1 0x2208
#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C3_2 0x2209
#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C1_1 0x220A
#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C1_2 0x220B
#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C1_1 0x220C
#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C1_2 0x220D
#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C2_1 0x220E
#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C2_2 0x220F
#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C3_1 0x2210
#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C3_2 0x2211
#define WM8958_MBC_BAND_1_LOWER_CUTOFF_1 0x2212
#define WM8958_MBC_BAND_1_LOWER_CUTOFF_2 0x2213
#define WM8958_MBC_BAND_1_K_1 0x2400
#define WM8958_MBC_BAND_1_K_2 0x2401
#define WM8958_MBC_BAND_1_N1_1 0x2402
#define WM8958_MBC_BAND_1_N1_2 0x2403
#define WM8958_MBC_BAND_1_N2_1 0x2404
#define WM8958_MBC_BAND_1_N2_2 0x2405
#define WM8958_MBC_BAND_1_N3_1 0x2406
#define WM8958_MBC_BAND_1_N3_2 0x2407
#define WM8958_MBC_BAND_1_N4_1 0x2408
#define WM8958_MBC_BAND_1_N4_2 0x2409
#define WM8958_MBC_BAND_1_N5_1 0x240A
#define WM8958_MBC_BAND_1_N5_2 0x240B
#define WM8958_MBC_BAND_1_X1_1 0x240C
#define WM8958_MBC_BAND_1_X1_2 0x240D
#define WM8958_MBC_BAND_1_X2_1 0x240E
#define WM8958_MBC_BAND_1_X2_2 0x240F
#define WM8958_MBC_BAND_1_X3_1 0x2410
#define WM8958_MBC_BAND_1_X3_2 0x2411
#define WM8958_MBC_BAND_1_ATTACK_1 0x2412
#define WM8958_MBC_BAND_1_ATTACK_2 0x2413
#define WM8958_MBC_BAND_1_DECAY_1 0x2414
#define WM8958_MBC_BAND_1_DECAY_2 0x2415
#define WM8958_MBC_BAND_2_K_1 0x2416
#define WM8958_MBC_BAND_2_K_2 0x2417
#define WM8958_MBC_BAND_2_N1_1 0x2418
#define WM8958_MBC_BAND_2_N1_2 0x2419
#define WM8958_MBC_BAND_2_N2_1 0x241A
#define WM8958_MBC_BAND_2_N2_2 0x241B
#define WM8958_MBC_BAND_2_N3_1 0x241C
#define WM8958_MBC_BAND_2_N3_2 0x241D
#define WM8958_MBC_BAND_2_N4_1 0x241E
#define WM8958_MBC_BAND_2_N4_2 0x241F
#define WM8958_MBC_BAND_2_N5_1 0x2420
#define WM8958_MBC_BAND_2_N5_2 0x2421
#define WM8958_MBC_BAND_2_X1_1 0x2422
#define WM8958_MBC_BAND_2_X1_2 0x2423
#define WM8958_MBC_BAND_2_X2_1 0x2424
#define WM8958_MBC_BAND_2_X2_2 0x2425
#define WM8958_MBC_BAND_2_X3_1 0x2426
#define WM8958_MBC_BAND_2_X3_2 0x2427
#define WM8958_MBC_BAND_2_ATTACK_1 0x2428
#define WM8958_MBC_BAND_2_ATTACK_2 0x2429
#define WM8958_MBC_BAND_2_DECAY_1 0x242A
#define WM8958_MBC_BAND_2_DECAY_2 0x242B
#define WM8958_MBC_B2_PG2_1 0x242C
#define WM8958_MBC_B2_PG2_2 0x242D
#define WM8958_MBC_B1_PG2_1 0x242E
#define WM8958_MBC_B1_PG2_2 0x242F
#define WM8994_WRITE_SEQUENCER_0 0x3000
#define WM8994_WRITE_SEQUENCER_1 0x3001
#define WM8994_WRITE_SEQUENCER_2 0x3002
......
......@@ -92,6 +92,11 @@ struct wm8994_priv {
int retune_mobile_cfg[WM8994_NUM_EQ];
struct soc_enum retune_mobile_enum;
/* Platform dependant MBC configuration */
int mbc_cfg;
const char **mbc_texts;
struct soc_enum mbc_enum;
struct wm8994_micdet micdet[2];
wm8958_micdet_cb jack_cb;
......@@ -543,8 +548,9 @@ static const struct soc_enum aif2dacr_src =
static void wm8958_mbc_apply(struct snd_soc_codec *codec, int mbc, int start)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994_pdata *pdata = wm8994->pdata;
int pwr_reg = snd_soc_read(codec, WM8994_POWER_MANAGEMENT_5);
int ena, reg, aif;
int ena, reg, aif, i;
switch (mbc) {
case 0:
......@@ -587,7 +593,20 @@ static void wm8958_mbc_apply(struct snd_soc_codec *codec, int mbc, int start)
snd_soc_update_bits(codec, WM8958_DSP2_PROGRAM,
WM8958_DSP2_ENA, WM8958_DSP2_ENA);
/* TODO: Apply any user specified MBC settings */
/* If we've got user supplied MBC settings use them */
if (pdata && pdata->num_mbc_cfgs) {
struct wm8958_mbc_cfg *cfg
= &pdata->mbc_cfgs[wm8994->mbc_cfg];
for (i = 0; i < ARRAY_SIZE(cfg->coeff_regs); i++)
snd_soc_write(codec, i + WM8958_MBC_BAND_1_K_1,
cfg->coeff_regs[i]);
for (i = 0; i < ARRAY_SIZE(cfg->cutoff_regs); i++)
snd_soc_write(codec,
i + WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1,
cfg->cutoff_regs[i]);
}
/* Run the DSP */
snd_soc_write(codec, WM8958_DSP2_EXECCONTROL,
......@@ -648,6 +667,39 @@ static int wm8958_aif_ev(struct snd_soc_dapm_widget *w,
return 0;
}
static int wm8958_put_mbc_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994_pdata *pdata = wm8994->pdata;
int value = ucontrol->value.integer.value[0];
int reg;
/* Don't allow on the fly reconfiguration */
reg = snd_soc_read(codec, WM8994_CLOCKING_1);
if (reg < 0 || reg & WM8958_DSP2CLK_ENA)
return -EBUSY;
if (value >= pdata->num_mbc_cfgs)
return -EINVAL;
wm8994->mbc_cfg = value;
return 0;
}
static int wm8958_get_mbc_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
ucontrol->value.enumerated.item[0] = wm8994->mbc_cfg;
return 0;
}
static int wm8958_mbc_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
......@@ -2539,6 +2591,34 @@ static void wm8994_handle_pdata(struct wm8994_priv *wm8994)
dev_dbg(codec->dev, "%d ReTune Mobile configurations\n",
pdata->num_retune_mobile_cfgs);
if (pdata->num_mbc_cfgs) {
struct snd_kcontrol_new control[] = {
SOC_ENUM_EXT("MBC Mode", wm8994->mbc_enum,
wm8958_get_mbc_enum, wm8958_put_mbc_enum),
};
/* We need an array of texts for the enum API */
wm8994->mbc_texts = kmalloc(sizeof(char *)
* pdata->num_mbc_cfgs, GFP_KERNEL);
if (!wm8994->mbc_texts) {
dev_err(wm8994->codec->dev,
"Failed to allocate %d MBC config texts\n",
pdata->num_mbc_cfgs);
return;
}
for (i = 0; i < pdata->num_mbc_cfgs; i++)
wm8994->mbc_texts[i] = pdata->mbc_cfgs[i].name;
wm8994->mbc_enum.max = pdata->num_mbc_cfgs;
wm8994->mbc_enum.texts = wm8994->mbc_texts;
ret = snd_soc_add_controls(wm8994->codec, control, 1);
if (ret != 0)
dev_err(wm8994->codec->dev,
"Failed to add MBC mode controls: %d\n", ret);
}
if (pdata->num_retune_mobile_cfgs)
wm8994_handle_retune_mobile_pdata(wm8994);
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment