Skip to content

L
linux
Commit 132d68d3 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 5.2-rc1

  There is the usual set of:

   - USB gadget updates

   - PHY driver updates and additions

   - USB serial driver updates and fixes

   - typec updates and new chips supported

   - mtu3 driver updates

   - xhci driver updates

   - other tiny driver updates

  Nothing really interesting, just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues. The usb-gadget and usb-serial trees were merged a bit "late",
  but both of them had been in linux-next before they got merged here
  last Friday"

* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
  USB: serial: f81232: implement break control
  USB: serial: f81232: add high baud rate support
  USB: serial: f81232: clear overrun flag
  USB: serial: f81232: fix interrupt worker not stop
  usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
  usb: dwc3: Fix default lpm_nyet_threshold value
  usb: dwc3: debug: Print GET_STATUS(device) tracepoint
  usb: dwc3: Do core validation early on probe
  usb: dwc3: gadget: Set lpm_capable
  usb: gadget: atmel: tie wake lock to running clock
  usb: gadget: atmel: support USB suspend
  usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
  dwc2: gadget: Fix completed transfer size calculation in DDMA
  usb: dwc2: Set lpm mode parameters depend on HW configuration
  usb: dwc2: Fix channel disable flow
  usb: dwc2: Set actual frame number for completed ISOC transfer
  usb: gadget: do not use __constant_cpu_to_le16
  usb: dwc2: gadget: Increase descriptors count for ISOC's
  usb: introduce usb_ep_type_string() function
  usb: dwc3: move synchronize_irq() out of the spinlock protected block
  ...
parents 80f23212 3515468a
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 12187 additions and 3332 deletions
Documentation/ABI/testing/sysfs-driver-ucsi-ccg 0 → 100644
View file @ 132d68d3
What: /sys/bus/i2c/drivers/ucsi_ccg/.../do_flash
Date: May 2019
Contact: Ajay Gupta <ajayg@nvidia.com>
Description:
Tell the driver for Cypress CCGx Type-C controller to attempt
firmware upgrade by writing [Yy1] to the file.
Documentation/ABI/testing/usb-uevent 0 → 100644
View file @ 132d68d3
What: Raise a uevent when a USB Host Controller has died
Date: 2019-04-17
KernelVersion: 5.2
Contact: linux-usb@vger.kernel.org
Description: When the USB Host Controller has entered a state where it is no
longer functional a uevent will be raised. The uevent will
contain ACTION=offline and ERROR=DEAD.
Here is an example taken using udevadm monitor -p:
KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb)
ACTION=offline
BUSNUM=002
DEVNAME=/dev/bus/usb/002/001
DEVNUM=001
DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2
DEVTYPE=usb_device
DRIVER=usb
ERROR=DEAD
MAJOR=189
MINOR=128
PRODUCT=1d6b/2/414
SEQNUM=2168
SUBSYSTEM=usb
TYPE=9/0/1
Users: chromium-os-dev@chromium.org
Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt 0 → 100644
View file @ 132d68d3
Broadcom Stingray USB PHY
Required properties:
- compatible : should be one of the listed compatibles
- "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS.
- "brcm,sr-usb-hs-phy" is a single HS PHY.
- reg: offset and length of the PHY blocks registers
- #phy-cells:
- Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate
the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY.
- Must be 0 for brcm,sr-usb-hs-phy.
Refer to phy/phy-bindings.txt for the generic PHY binding properties
Example:
usbphy0: usb-phy@0 {
compatible = "brcm,sr-usb-combo-phy";
reg = <0x00000000 0x100>;
#phy-cells = <1>;
};
usbphy1: usb-phy@10000 {
compatible = "brcm,sr-usb-combo-phy";
reg = <0x00010000 0x100>,
#phy-cells = <1>;
};
usbphy2: usb-phy@20000 {
compatible = "brcm,sr-usb-hs-phy";
reg = <0x00020000 0x100>,
#phy-cells = <0>;
};
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
View file @ 132d68d3
......@@ -7,6 +7,9 @@ Required properties:
- clocks: phandles to the clocks for each clock listed in clock-names
- clock-names: must contain "phy"
Optional properties:
- vbus-supply: A phandle to the regulator for USB VBUS.
Example:
usb3_phy0: phy@381f0040 {
compatible = "fsl,imx8mq-usb-phy";
......
Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt 0 → 100644
View file @ 132d68d3
* Amlogic G12A USB2 PHY binding
Required properties:
- compatible: Should be "amlogic,meson-g12a-usb2-phy"
- reg: The base address and length of the registers
- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
- clocks: a phandle to the clock of this PHY
- clock-names: must be "xtal"
- resets: a phandle to the reset line of this PHY
- reset-names: must be "phy"
- phy-supply: see phy-bindings.txt in this directory
Example:
usb2_phy0: phy@36000 {
compatible = "amlogic,g12a-usb2-phy";
reg = <0x0 0x36000 0x0 0x2000>;
clocks = <&xtal>;
clock-names = "xtal";
resets = <&reset RESET_USB_PHY21>;
reset-names = "phy";
#phy-cells = <0>;
};
Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt 0 → 100644
View file @ 132d68d3
* Amlogic G12A USB3 + PCIE Combo PHY binding
Required properties:
- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
- #phys-cells: must be 1. The cell number is used to select the phy mode
as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
- reg: The base address and length of the registers
- clocks: a phandle to the 100MHz reference clock of this PHY
- clock-names: must be "ref_clk"
- resets: phandle to the reset lines for the PHY control
- reset-names: must be "phy"
Example:
usb3_pcie_phy: phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = <0x0 0x46000 0x0 0x2000>;
clocks = <&clkc CLKID_PCIE_PLL>;
clock-names = "ref_clk";
resets = <&reset RESET_PCIE_PHY>;
reset-names = "phy";
#phy-cells = <1>;
};
Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
View file @ 132d68d3
......@@ -36,11 +36,20 @@ Required properties:
- Tegra124: "nvidia,tegra124-xusb-padctl"
- Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
- Tegra210: "nvidia,tegra210-xusb-padctl"
- Tegra186: "nvidia,tegra186-xusb-padctl"
- reg: Physical base address and length of the controller's registers.
- resets: Must contain an entry for each entry in reset-names.
- reset-names: Must include the following entries:
- "padctl"
For Tegra186:
- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY
power supply. Must supply 1.8 V.
- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
3.3 V.
- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
Pad nodes:
==========
......
Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt 0 → 100644
View file @ 132d68d3
Hisilicon hi3660 USB PHY
-----------------------
Required properties:
- compatible: should be "hisilicon,hi3660-usb-phy"
- #phy-cells: must be 0
- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
- hisilicon,eye-diagram-param: parameter set for phy
Refer to phy/phy-bindings.txt for the generic PHY binding properties
This is a subnode of usb3_otg_bc register node.
Example:
usb3_otg_bc: usb3_otg_bc@ff200000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0xff200000 0x0 0x1000>;
usb-phy {
compatible = "hisilicon,hi3660-usb-phy";
#phy-cells = <0>;
hisilicon,pericrg-syscon = <&crg_ctrl>;
hisilicon,pctrl-syscon = <&pctrl>;
hisilicon,eye-diagram-param = <0x22466e4>;
};
};
Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt 0 → 100644
View file @ 132d68d3
MediaTek Universal Flash Storage (UFS) M-PHY binding
--------------------------------------------------------
UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
Each UFS M-PHY node should have its own node.
To bind UFS M-PHY with UFS host controller, the controller node should
contain a phandle reference to UFS M-PHY node.
Required properties for UFS M-PHY nodes:
- compatible : Compatible list, contains the following controller:
"mediatek,mt8183-ufsphy" for ufs phy
persent on MT81xx chipsets.
- reg : Address and length of the UFS M-PHY register set.
- #phy-cells : This property shall be set to 0.
- clocks : List of phandle and clock specifier pairs.
- clock-names : List of clock input name strings sorted in the same
order as the clocks property. Following clocks are
mandatory.
"unipro": Unipro core control clock.
"mp": M-PHY core control clock.
Example:
ufsphy: phy@11fa0000 {
compatible = "mediatek,mt8183-ufsphy";
reg = <0 0x11fa0000 0 0xc000>;
#phy-cells = <0>;
clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>,
<&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>;
clock-names = "unipro", "mp";
};
ufshci@11270000 {
...
phys = <&ufsphy>;
};
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
View file @ 132d68d3
......@@ -11,6 +11,7 @@ Required properties:
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
"qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
"qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
"qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
......@@ -48,6 +49,8 @@ Required properties:
"aux", "cfg_ahb", "ref".
For "qcom,msm8998-qmp-ufs-phy" must contain:
"ref", "ref_aux".
For "qcom,msm8998-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
......@@ -59,7 +62,8 @@ Required properties:
one for each entry in reset-names.
- reset-names: "phy" for reset of phy block,
"common" for phy common block reset,
"cfg" for phy's ahb cfg block reset.
"cfg" for phy's ahb cfg block reset,
"ufsphy" for the PHY reset in the UFS controller.
For "qcom,ipq8074-qmp-pcie-phy" must contain:
"phy", "common".
......@@ -69,12 +73,16 @@ Required properties:
"phy", "common".
For "qcom,msm8998-qmp-usb3-phy" must contain
"phy", "common".
For "qcom,msm8998-qmp-ufs-phy": no resets are listed.
For "qcom,msm8998-qmp-ufs-phy": must contain:
"ufsphy".
For "qcom,msm8998-qmp-pcie-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
For "qcom,sdm845-qmp-ufs-phy": must contain:
"ufsphy".
- vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
......
Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
View file @ 132d68d3
......@@ -7,6 +7,7 @@ Required properties:
- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
"renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
"renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC.
"renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
"renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
......@@ -30,7 +31,7 @@ channels. These subnodes must contain the following properties:
- #phy-cells: see phy-bindings.txt in the same directory, must be <1>.
The phandle's argument in the PHY specifier is the USB controller selector for
the USB channel; see the selector meanings below:
the USB channel other than r8a77470 SoC; see the selector meanings below:
+-----------+---------------+---------------+
|\ Selector | | |
......@@ -41,6 +42,16 @@ the USB channel; see the selector meanings below:
| 2 | PCI EHCI/OHCI | xHCI |
+-----------+---------------+---------------+
For r8a77470 SoC;see the selector meaning below:
+-----------+---------------+---------------+
|\ Selector | | |
+ --------- + 0 | 1 |
| Channel \| | |
+-----------+---------------+---------------+
| 0 | EHCI/OHCI | HS-USB |
+-----------+---------------+---------------+
Example (Lager board):
usb-phy@e6590100 {
......@@ -48,15 +59,53 @@ Example (Lager board):
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 704>;
usb-channel@0 {
usb0: usb-channel@0 {
reg = <0>;
#phy-cells = <1>;
};
usb-channel@2 {
usb2: usb-channel@2 {
reg = <2>;
#phy-cells = <1>;
};
};
Example (iWave RZ/G1C sbc):
usbphy0: usb-phy0@e6590100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 704>;
usb0: usb-channel@0 {
reg = <0>;
#phy-cells = <1>;
};
};
usbphy1: usb-phy@e6598100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6598100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cpg CPG_MOD 706>;
clock-names = "usbhs";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 706>;
usb1: usb-channel@0 {
reg = <0>;
#phy-cells = <1>;
};
};
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
View file @ 132d68d3
* Renesas R-Car generation 3 USB 2.0 PHY
This file provides information on what the device node for the R-Car generation
3 and RZ/G2 USB 2.0 PHY contain.
3, RZ/G1C and RZ/G2 USB 2.0 PHY contain.
Required properties:
- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
SoC.
"renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
SoC.
"renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
SoC.
......@@ -27,7 +29,13 @@ Required properties:
- reg: offset and length of the partial USB 2.0 Host register block.
- clocks: clock phandle and specifier pair(s).
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
using <0> is deprecated).
The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
- 1 = USBH_INTA (OHCI)
- 2 = USBH_INTB (EHCI)
- 3 = UCOM_INT (OTG and BC)
Optional properties:
To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
......
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
View file @ 132d68d3
......@@ -7,12 +7,15 @@ Required properties:
- reg: PHY register address offset and length in "general
register files"
Optional clocks using the clock bindings (see ../clock/clock-bindings.txt),
specified by name:
Optional properties:
- clock-names: Should contain "emmcclk". Although this is listed as optional
(because most boards can get basic functionality without having
access to it), it is strongly suggested.
See ../clock/clock-bindings.txt for details.
- clocks: Should have a phandle to the card clock exported by the SDHCI driver.
- drive-impedance-ohm: Specifies the drive impedance in Ohm.
Possible values are 33, 40, 50, 66 and 100.
If not set, the default value of 50 will be applied.
Example:
......@@ -29,6 +32,7 @@ grf: syscon@ff770000 {
reg = <0xf780 0x20>;
clocks = <&sdhci>;
clock-names = "emmcclk";
drive-impedance-ohm = <50>;
#phy-cells = <0>;
};
};
Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt 0 → 100644
View file @ 132d68d3
TI AM654 SERDES
Required properties:
- compatible: Should be "ti,phy-am654-serdes"
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy. Should be "2". The 1st cell
corresponds to the phy type (should be one of the types specified in
include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
lane function.
If SERDES0 is referenced 2nd cell should be:
0 - USB3
1 - PCIe0 Lane0
2 - ICSS2 SGMII Lane0
If SERDES1 is referenced 2nd cell should be:
0 - PCIe1 Lane0
1 - PCIe0 Lane1
2 - ICSS2 SGMII Lane1
- power-domains: As documented by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
- clocks: List of clock-specifiers representing the input to the SERDES.
Should have 3 items representing the left input clock, external
reference clock and right input clock in that order.
- clock-output-names: List of clock names for each of the clock outputs of
SERDES. Should have 3 items for CMU reference clock,
left output clock and right output clock in that order.
- assigned-clocks: As defined in
Documentation/devicetree/bindings/clock/clock-bindings.txt
- assigned-clock-parents: As defined in
Documentation/devicetree/bindings/clock/clock-bindings.txt
- #clock-cells: Should be <1> to choose between the 3 output clocks.
Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
for selecting the correct reference clock. This can be used while
specifying the clocks created by SERDES.
=> AM654_SERDES_CMU_REFCLK
=> AM654_SERDES_LO_REFCLK
=> AM654_SERDES_RO_REFCLK
- mux-controls: Phandle to the multiplexer that is used to select the lane
function. See #phy-cells above to see the multiplex values.
Example:
Example for SERDES0 is given below. It has 3 clock inputs;
left input reference clock as indicated by <&k3_clks 153 4>, external
reference clock as indicated by <&k3_clks 153 1> and right input
reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
right input of SERDES0 is connected to the left output of SERDES1).
SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
first refers to the CMU reference clock, second refers to the left output
reference clock and the third refers to the right output reference clock.
The assigned-clocks and assigned-clock-parents is used here to set the
parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
CMU reference clock to left input reference clock.
serdes0: serdes@900000 {
compatible = "ti,phy-am654-serdes";
reg = <0x0 0x900000 0x0 0x2000>;
reg-names = "serdes";
#phy-cells = <2>;
power-domains = <&k3_pds 153>;
clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
<&serdes1 AM654_SERDES_LO_REFCLK>;
clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk",
"serdes0_ro_refclk";
assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
ti,serdes-clk = <&serdes0_clk>;
mux-controls = <&serdes_mux 0>;
#clock-cells = <1>;
};
Example for PCIe consumer node using the SERDES PHY specifier is given below.
&pcie0_rc {
num-lanes = <2>;
phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
phy-names = "pcie-phy0", "pcie-phy1";
};
Documentation/devicetree/bindings/ufs/ufs-qcom.txt
View file @ 132d68d3
......@@ -29,6 +29,7 @@ Optional properties:
- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
- resets : specifies the PHY reset in the UFS controller
Example:
......@@ -51,9 +52,11 @@ Example:
<&clock_gcc clk_ufs_phy_ldo>,
<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
resets = <&ufshc 0>;
};
ufshc@fc598000 {
ufshc: ufshc@fc598000 {
#reset-cells = <1>;
...
phys = <&ufsphy1>;
phy-names = "ufsphy";
......
Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
View file @ 132d68d3
......@@ -50,6 +50,8 @@ Optional properties:
-lanes-per-direction : number of lanes available per direction - either 1 or 2.
Note that it is assume same number of lanes is used both
directions at once. If not specified, default is 2 lanes per direction.
- #reset-cells : Must be <1> for Qualcomm UFS controllers that expose
PHY reset from the UFS controller.
- resets : reset node register
- reset-names : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
......@@ -79,4 +81,5 @@ Example:
reset-names = "rst";
phys = <&ufsphy1>;
phy-names = "ufsphy";
#reset-cells = <1>;
};
Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
View file @ 132d68d3
......@@ -40,3 +40,91 @@ Example device nodes:
phy-names = "usb2-phy", "usb3-phy";
};
};
Amlogic Meson G12A DWC3 USB SoC Controller Glue
The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
only.
A glue connects the DWC3 core to USB2 PHYs and optionnaly to an USB3 PHY.
One of the USB2 PHY can be re-routed in peripheral mode to a DWC2 USB IP.
The DWC3 Glue controls the PHY routing and power, an interrupt line is
connected to the Glue to serve as OTG ID change detection.
Required properties:
- compatible: Should be "amlogic,meson-g12a-usb-ctrl"
- clocks: a handle for the "USB" clock
- resets: a handle for the shared "USB" reset line
- reg: The base address and length of the registers
- interrupts: the interrupt specifier for the OTG detection
- phys: handle to used PHYs on the system
- a <0> phandle can be used if a PHY is not used
- phy-names: names of the used PHYs on the system :
- "usb2-phy0" for USB2 PHY0 if USBHOST_A port is used
- "usb2-phy1" for USB2 PHY1 if USBOTG_B port is used
- "usb3-phy0" for USB3 PHY if USB3_0 is used
- dr_mode: should be "host", "peripheral", or "otg" depending on
the usage and configuration of the OTG Capable port.
- "host" and "peripheral" means a fixed Host or Device only connection
- "otg" means the port can be used as both Host or Device and
be switched automatically using the OTG ID pin.
Optional properties:
- vbus-supply: should be a phandle to the regulator controlling the VBUS
power supply when used in OTG switchable mode
Required child nodes:
A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
A child node must exist to represent the core DWC2 IP block. The name of
the node is not important. The content of the node is defined in dwc2.txt.
PHY documentation is provided in the following places:
- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
Example device nodes:
usb: usb@ffe09000 {
compatible = "amlogic,meson-g12a-usb-ctrl";
reg = <0x0 0xffe09000 0x0 0xa0>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&clkc CLKID_USB>;
resets = <&reset RESET_USB>;
dr_mode = "otg";
phys = <&usb2_phy0>, <&usb2_phy1>,
<&usb3_pcie_phy PHY_TYPE_USB3>;
phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
dwc2: usb@ff400000 {
compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
phys = <&usb2_phy1>;
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 16 16 16>;
};
dwc3: usb@ff500000 {
compatible = "snps,dwc3";
reg = <0x0 0xff500000 0x0 0x100000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment;
};
};
Documentation/devicetree/bindings/usb/dwc2.txt
View file @ 132d68d3
......@@ -14,6 +14,7 @@ Required properties:
- "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs;
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
- snps,dwc2: A generic DWC2 USB controller with default parameters.
- "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
......@@ -31,12 +32,18 @@ Refer to clk/clock-bindings.txt for generic clock consumer properties
Optional properties:
- phys: phy provider specifier
- phy-names: shall be "usb2-phy"
- vbus-supply: reference to the VBUS regulator. Depending on the current mode
this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
regulator is updated if the controller is configured in "otg" mode and the
status changes between "host" and "peripheral".
Refer to phy/phy-bindings.txt for generic phy consumer properties
- dr_mode: shall be one of "host", "peripheral" and "otg"
Refer to usb/generic.txt
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
we detect a wakeup. This is due to a hardware errata.
Deprecated properties:
- g-use-dma: gadget DMA mode is automatically detected
......
Documentation/devicetree/bindings/usb/generic-ehci.yaml 0 → 100644
View file @ 132d68d3
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: USB EHCI Controller Device Tree Bindings
allOf:
- $ref: "usb-hcd.yaml"
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
properties:
compatible:
contains:
const: generic-ehci
reg:
maxItems: 1
interrupts:
maxItems: 1
resets:
minItems: 1
maxItems: 4
clocks:
minItems: 1
maxItems: 4
description: |
In case the Renesas R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second
one should be peripheral
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors and big
endian registers.
big-endian-desc:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors.
big-endian-regs:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian registers.
has-transaction-translator:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag if EHCI has a Transaction Translator built into
the root hub.
needs-reset-on-resume:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag to force EHCI reset after resume.
phys: true
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "generic-ehci";
interrupt-parent = <&UIC0>;
interrupts = <0x1a 4>;
reg = <0 0xe0000300 90 0 0xe0000390 70>;
big-endian;
};
- |
ehci0: usb@1c14000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
};
...
Documentation/devicetree/bindings/usb/generic-ohci.yaml 0 → 100644
View file @ 132d68d3
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: USB OHCI Controller Device Tree Bindings
allOf:
- $ref: "usb-hcd.yaml"
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
properties:
compatible:
contains:
const: generic-ohci
reg:
maxItems: 1
interrupts:
maxItems: 1
resets:
minItems: 1
maxItems: 2
clocks:
minItems: 1
maxItems: 3
description: |
In case the Renesas R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second
one should be peripheral
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors and big
endian registers.
big-endian-desc:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors.
big-endian-regs:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian registers.
remote-wakeup-connected:
$ref: /schemas/types.yaml#/definitions/flag
description:
Remote wakeup is wired on the platform.
no-big-frame-no:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set if frame_no lives in bits [15:0] of HCCA
num-ports:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Overrides the detected port count
phys: true
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
ohci0: usb@1c14400 {
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
};
...
Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
View file @ 132d68d3
......@@ -8,9 +8,15 @@ Required properties:
- interrupt-names: must be "mc"
- clocks: phandle to the "udc" clock
- clock-names: must be "udc"
- phys: phandle to the USB PHY
Example:
usb_phy: usb-phy@0 {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
udc: usb@13040000 {
compatible = "ingenic,jz4740-musb";
reg = <0x13040000 0x10000>;
......@@ -21,4 +27,6 @@ udc: usb@13040000 {
clocks = <&cgu JZ4740_CLK_UDC>;
clock-names = "udc";
phys = <&usb_phy>;
};
Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
View file @ 132d68d3
......@@ -10,6 +10,7 @@ Required properties:
- Tegra124: "nvidia,tegra124-xusb"
- Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
- Tegra210: "nvidia,tegra210-xusb"
- Tegra186: "nvidia,tegra186-xusb"
- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
registers and XUSB IPFS registers.
- reg-names: Must contain the following entries:
......@@ -59,6 +60,8 @@ For Tegra210:
- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
For Tegra210 and Tegra186:
- power-domains: A list of PM domain specifiers that reference each power-domain
used by the xHCI controller. This list must comprise of a specifier for the
XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
......@@ -78,6 +81,7 @@ Optional properties:
- Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
- Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
usb3-3
- Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
Example:
--------
......
Documentation/devicetree/bindings/usb/renesas_usbhs.txt
View file @ 132d68d3
......@@ -6,6 +6,7 @@ Required properties:
- "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device
- "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
- "renesas,usbhs-r8a77470" for r8a77470 (RZ/G1C) compatible device
- "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device
- "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device
- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
......
Documentation/devicetree/bindings/usb/usb-ehci.txt deleted 100644 → 0
View file @ 80f23212
USB EHCI controllers
Required properties:
- compatible : should be "generic-ehci".
- reg : should contain at least address and length of the standard EHCI
register set for the device. Optional platform-dependent registers
(debug-port or other) can be also specified here, but only after
definition of standard EHCI registers.
- interrupts : one EHCI interrupt should be described here.
Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- needs-reset-on-resume : boolean, set this to force EHCI reset after resume
- has-transaction-translator : boolean, set this if EHCI have a Transaction
Translator built into the root hub.
- clocks : a list of phandle + clock specifier pairs. In case of Renesas
R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second one
should be peripheral.
- phys : see usb-hcd.txt in the current directory
- resets : phandle + reset specifier pair
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
interrupts = <1a 4>;
reg = <0 e0000300 90 0 e0000390 70>;
big-endian;
};
Example (Allwinner sun4i A10 SoC):
ehci0: usb@1c14000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
};
Documentation/devicetree/bindings/usb/usb-hcd.txt deleted 100644 → 0
View file @ 80f23212
Generic USB HCD (Host Controller Device) Properties
Optional properties:
- phys: a list of all USB PHYs on this HCD
Example:
&usb1 {
phys = <&usb2_phy1>, <&usb3_phy1>;
};
Documentation/devicetree/bindings/usb/usb-hcd.yaml 0 → 100644
View file @ 132d68d3
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/usb-hcd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Generic USB Host Controller Device Tree Bindings
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
properties:
$nodename:
pattern: "^usb(@.*)?"
phys:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
List of all the USB PHYs on this HCD
examples:
- |
usb {
phys = <&usb2_phy1>, <&usb3_phy1>;
};
Documentation/devicetree/bindings/usb/usb-ohci.txt deleted 100644 → 0
View file @ 80f23212
USB OHCI controllers
Required properties:
- compatible : "generic-ohci"
- reg : ohci controller register range (address and length)
- interrupts : ohci controller interrupt
Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
- remote-wakeup-connected: remote wakeup is wired on the platform
- num-ports : u32, to override the detected port count
- clocks : a list of phandle + clock specifier pairs. In case of Renesas
R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second one
should be peripheral.
- phys : see usb-hcd.txt in the current directory
- resets : a list of phandle + reset specifier pairs
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example:
ohci0: usb@1c14400 {
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
phy-names = "usb";
};
Documentation/devicetree/bindings/usb/usb-xhci.txt
View file @ 132d68d3
......@@ -10,6 +10,7 @@ Required properties:
- "renesas,xhci-r8a7743" for r8a7743 SoC
- "renesas,xhci-r8a7744" for r8a7744 SoC
- "renesas,xhci-r8a774a1" for r8a774a1 SoC
- "renesas,xhci-r8a774c0" for r8a774c0 SoC
- "renesas,xhci-r8a7790" for r8a7790 SoC
- "renesas,xhci-r8a7791" for r8a7791 SoC
- "renesas,xhci-r8a7793" for r8a7793 SoC
......
Documentation/devicetree/bindings/usb/usb251xb.txt
View file @ 132d68d3
......@@ -64,8 +64,10 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
- swap-dx-lanes : Specifies the ports which will swap the differential-pair
(D+/D-), default is not-swapped.
- swap-dx-lanes : Specifies the downstream ports which will swap the
differential-pair (D+/D-), default is not-swapped.
- swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
swapping (boolean, default is not-swapped)
Examples:
usb2512b@2c {
......
Documentation/usb/WUSB-Design-overview.txt
View file @ 132d68d3
================================
Linux UWB + Wireless USB + WiNET
================================
Copyright (C) 2005-2006 Intel Corporation
(C) 2005-2006 Intel Corporation
Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This program is free software; you can redistribute it and/or
......@@ -29,6 +31,7 @@ drivers for the USB based UWB radio controllers defined in the
Wireless USB 1.0 specification (including Wireless USB host controller
and an Intel WiNET controller).
.. Contents
1. Introduction
1. HWA: Host Wire adapters, your Wireless USB dongle
......@@ -51,7 +54,8 @@ and an Intel WiNET controller).
4. Glossary
Introduction
Introduction
============
UWB is a wide-band communication protocol that is to serve also as the
low-level protocol for others (much like TCP sits on IP). Currently
......@@ -93,7 +97,8 @@ The different logical parts of this driver are:
do the actual WUSB.
HWA: Host Wire adapters, your Wireless USB dongle
HWA: Host Wire adapters, your Wireless USB dongle
-------------------------------------------------
WUSB also defines a device called a Host Wire Adaptor (HWA), which in
mere terms is a USB dongle that enables your PC to have UWB and Wireless
......@@ -125,7 +130,8 @@ The HWA itself is broken in two or three main interfaces:
their type and kick into gear.
DWA: Device Wired Adaptor, a Wireless USB hub for wired devices
DWA: Device Wired Adaptor, a Wireless USB hub for wired devices
---------------------------------------------------------------
These are the complement to HWAs. They are a USB host for connecting
wired devices, but it is connected to your PC connected via Wireless
......@@ -137,7 +143,8 @@ code with the HWA-RC driver; there is a bunch of factorization work that
has been done to support that in upcoming releases.
WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter
WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter
-------------------------------------------------------------------
This is your usual PCI device that implements WHCI. Similar in concept
to EHCI, it allows your wireless USB devices (including DWAs) to connect
......@@ -148,7 +155,8 @@ There is still no driver support for this, but will be in upcoming
releases.
The UWB stack
The UWB stack
=============
The main mission of the UWB stack is to keep a tally of which devices
are in radio proximity to allow drivers to connect to them. As well, it
......@@ -156,7 +164,8 @@ provides an API for controlling the local radio controllers (RCs from
now on), such as to start/stop beaconing, scan, allocate bandwidth, etc.
Devices and hosts: the basic structure
Devices and hosts: the basic structure
--------------------------------------
The main building block here is the UWB device (struct uwb_dev). For
each device that pops up in radio presence (ie: the UWB host receives a
......@@ -187,7 +196,8 @@ the USB connected HWA. Eventually, drivers/whci-rc.c will do the same
for the PCI connected WHCI controller.
Host Controller life cycle
Host Controller life cycle
--------------------------
So let's say we connect a dongle to the system: it is detected and
firmware uploaded if needed [for Intel's i1480
......@@ -209,7 +219,8 @@ When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/
takes time of tearing everything down safely (or not...).
On the air: beacons and enumerating the radio neighborhood
On the air: beacons and enumerating the radio neighborhood
----------------------------------------------------------
So assuming we have devices and we have agreed for a channel to connect
on (let's say 9), we put the new RC to beacon:
......@@ -235,12 +246,14 @@ are received in some time, the device is considered gone and wiped out
the beacon cache of dead devices].
Device lists
Device lists
------------
All UWB devices are kept in the list of the struct bus_type uwb_bus_type.
Bandwidth allocation
Bandwidth allocation
--------------------
The UWB stack maintains a local copy of DRP availability through
processing of incoming *DRP Availability Change* notifications. This
......@@ -260,7 +273,8 @@ completion. [Note: The bandwidth reservation work is in progress and
subject to change.]
Wireless USB Host Controller drivers
Wireless USB Host Controller drivers
====================================
*WARNING* This section needs a lot of work!
......@@ -296,7 +310,8 @@ starts sending MMCs.
Now it all depends on external stimuli.
*New device connection*
New device connection
---------------------
A new device pops up, it scans the radio looking for MMCs that give out
the existence of Wireless USB channels. Once one (or more) are found,
......@@ -322,7 +337,8 @@ has seen the port status changes, as we have been toggling them. It will
start enumerating and doing transfers through usb_hcd->urb_enqueue() to
read descriptors and move our data.
*Device life cycle and keep alives*
Device life cycle and keep alives
---------------------------------
Every time there is a successful transfer to/from a device, we update a
per-device activity timestamp. If not, every now and then we check and
......@@ -340,7 +356,8 @@ device list looking for whom needs refreshing.
If the device wants to disconnect, it will either die (ugly) or send a
/DN_Disconnect/ that will prompt a disconnection from the system.
*Sending and receiving data*
Sending and receiving data
--------------------------
Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is
/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and
......@@ -394,7 +411,8 @@ finalize the transfer.
For IN xfers, we only issue URBs for the segments we want to read and
then wait for the xfer result data.
*URB mapping into xfers*
URB mapping into xfers
^^^^^^^^^^^^^^^^^^^^^^
This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an
rpipe to the endpoint where we have to transmit, create a transfer
......@@ -407,7 +425,8 @@ and not yet done and when all that is done, the xfer callback will be
called--this will call the URB callback.
Glossary
Glossary
========
*DWA* -- Device Wire Adapter
......@@ -436,4 +455,3 @@ the host.
Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by
InakyPerezGonzalez)
Documentation/usb/acm.txt
View file @ 132d68d3
Linux ACM driver v0.16
(c) 1999 Vojtech Pavlik <vojtech@suse.cz>
Sponsored by SuSE
----------------------------------------------------------------------------
======================
Linux ACM driver v0.16
======================
Copyright (c) 1999 Vojtech Pavlik <vojtech@suse.cz>
Sponsored by SuSE
0. Disclaimer
~~~~~~~~~~~~~
This program is free software; you can redistribute it and/or modify it
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA
Should you need to contact me, the author, you can do so either by e-mail
- mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
Should you need to contact me, the author, you can do so either by e-mail -
mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
Ucitelska 1576, Prague 8, 182 00 Czech Republic
For your convenience, the GNU General Public License version 2 is included
For your convenience, the GNU General Public License version 2 is included
in the package: See the file COPYING.
1. Usage
~~~~~~~~
The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal
The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal
adapters that conform to the Universal Serial Bus Communication Device Class
Abstract Control Model (USB CDC ACM) specification.
Many modems do, here is a list of those I know of:
Many modems do, here is a list of those I know of:
3Com OfficeConnect 56k
3Com Voice FaxModem Pro
3Com Sportster
MultiTech MultiModem 56k
Zoom 2986L FaxModem
Compaq 56k FaxModem
ELSA Microlink 56k
- 3Com OfficeConnect 56k
- 3Com Voice FaxModem Pro
- 3Com Sportster
- MultiTech MultiModem 56k
- Zoom 2986L FaxModem
- Compaq 56k FaxModem
- ELSA Microlink 56k
I know of one ISDN TA that does work with the acm driver:
I know of one ISDN TA that does work with the acm driver:
3Com USR ISDN Pro TA
- 3Com USR ISDN Pro TA
Some cell phones also connect via USB. I know the following phones work:
Some cell phones also connect via USB. I know the following phones work:
SonyEricsson K800i
- SonyEricsson K800i
Unfortunately many modems and most ISDN TAs use proprietary interfaces and
Unfortunately many modems and most ISDN TAs use proprietary interfaces and
thus won't work with this drivers. Check for ACM compliance before buying.
To use the modems you need these modules loaded:
To use the modems you need these modules loaded::
usbcore.ko
uhci-hcd.ko ohci-hcd.ko or ehci-hcd.ko
cdc-acm.ko
After that, the modem[s] should be accessible. You should be able to use
After that, the modem[s] should be accessible. You should be able to use
minicom, ppp and mgetty with them.
2. Verifying that it works
~~~~~~~~~~~~~~~~~~~~~~~~~~
The first step would be to check /sys/kernel/debug/usb/devices, it should look
like this:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=6800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
P: Vendor=04c1 ProdID=008f Rev= 2.07
S: Manufacturer=3Com Inc.
S: Product=3Com U.S. Robotics Pro ISDN TA
S: SerialNumber=UFT53A49BVT7
C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
The first step would be to check /sys/kernel/debug/usb/devices, it should look
like this::
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=6800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
P: Vendor=04c1 ProdID=008f Rev= 2.07
S: Manufacturer=3Com Inc.
S: Product=3Com U.S. Robotics Pro ISDN TA
S: SerialNumber=UFT53A49BVT7
C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
The presence of these three lines (and the Cls= 'comm' and 'data' classes)
is important, it means it's an ACM device. The Driver=acm means the acm
driver is used for the device. If you see only Cls=ff(vend.) then you're out
of luck, you have a device with vendor specific-interface.
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
In the system log you should see:
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c7691fa0, numif 1
usb.c: kmalloc IF c7b5f3e0, numif 2
usb.c: skipped 4 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: 3Com Inc.
Product: 3Com U.S. Robotics Pro ISDN TA
SerialNumber: UFT53A49BVT7
acm.c: probing config 1
acm.c: probing config 2
ttyACM0: USB ACM device
acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
usb.c: acm driver claimed interface c7b5f3e0
usb.c: acm driver claimed interface c7b5f3f8
usb.c: acm driver claimed interface c7691fa0
of luck, you have a device with vendor specific-interface::
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
In the system log you should see::
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c7691fa0, numif 1
usb.c: kmalloc IF c7b5f3e0, numif 2
usb.c: skipped 4 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: 3Com Inc.
Product: 3Com U.S. Robotics Pro ISDN TA
SerialNumber: UFT53A49BVT7
acm.c: probing config 1
acm.c: probing config 2
ttyACM0: USB ACM device
acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
usb.c: acm driver claimed interface c7b5f3e0
usb.c: acm driver claimed interface c7b5f3f8
usb.c: acm driver claimed interface c7691fa0
If all this seems to be OK, fire up minicom and set it to talk to the ttyACM
device and try typing 'at'. If it responds with 'OK', then everything is
......
Documentation/usb/authorization.txt
View file @ 132d68d3
==============================================================
Authorizing (or not) your USB devices to connect to the system
==============================================================
(C) 2007 Inaky Perez-Gonzalez <inaky@linux.intel.com> Intel Corporation
Copyright (C) 2007 Inaky Perez-Gonzalez <inaky@linux.intel.com> Intel Corporation
This feature allows you to control if a USB device can be used (or
not) in a system. This feature will allow you to implement a lock-down
......@@ -12,24 +13,25 @@ its interfaces are immediately made available to the users. With this
modification, only if root authorizes the device to be configured will
then it be possible to use it.
Usage:
Usage
=====
Authorize a device to connect:
Authorize a device to connect::
$ echo 1 > /sys/bus/usb/devices/DEVICE/authorized
$ echo 1 > /sys/bus/usb/devices/DEVICE/authorized
Deauthorize a device:
De-authorize a device::
$ echo 0 > /sys/bus/usb/devices/DEVICE/authorized
$ echo 0 > /sys/bus/usb/devices/DEVICE/authorized
Set new devices connected to hostX to be deauthorized by default (ie:
lock down):
lock down)::
$ echo 0 > /sys/bus/usb/devices/usbX/authorized_default
$ echo 0 > /sys/bus/usb/devices/usbX/authorized_default
Remove the lock down:
Remove the lock down::
$ echo 1 > /sys/bus/usb/devices/usbX/authorized_default
$ echo 1 > /sys/bus/usb/devices/usbX/authorized_default
By default, Wired USB devices are authorized by default to
connect. Wireless USB hosts deauthorize by default all new connected
......@@ -40,21 +42,21 @@ USB ports.
Example system lockdown (lame)
-----------------------
------------------------------
Imagine you want to implement a lockdown so only devices of type XYZ
can be connected (for example, it is a kiosk machine with a visible
USB port):
USB port)::
boot up
rc.local ->
boot up
rc.local ->
for host in /sys/bus/usb/devices/usb*
do
echo 0 > $host/authorized_default
done
for host in /sys/bus/usb/devices/usb*
do
echo 0 > $host/authorized_default
done
Hookup an script to udev, for new USB devices
Hookup an script to udev, for new USB devices::
if device_is_my_type $DEV
then
......@@ -67,10 +69,10 @@ checking if the class, type and protocol match something is the worse
security verification you can make (or the best, for someone willing
to break it). If you need something secure, use crypto and Certificate
Authentication or stuff like that. Something simple for an storage key
could be:
could be::
function device_is_my_type()
{
function device_is_my_type()
{
echo 1 > authorized # temporarily authorize it
# FIXME: make sure none can mount it
mount DEVICENODE /mntpoint
......@@ -83,7 +85,7 @@ function device_is_my_type()
else
echo 0 > authorized
fi
}
}
Of course, this is lame, you'd want to do a real certificate
......@@ -95,30 +97,35 @@ welcome.
Interface authorization
-----------------------
There is a similar approach to allow or deny specific USB interfaces.
That allows to block only a subset of an USB device.
Authorize an interface:
$ echo 1 > /sys/bus/usb/devices/INTERFACE/authorized
Authorize an interface::
Deauthorize an interface:
$ echo 0 > /sys/bus/usb/devices/INTERFACE/authorized
$ echo 1 > /sys/bus/usb/devices/INTERFACE/authorized
Deauthorize an interface::
$ echo 0 > /sys/bus/usb/devices/INTERFACE/authorized
The default value for new interfaces
on a particular USB bus can be changed, too.
Allow interfaces per default:
$ echo 1 > /sys/bus/usb/devices/usbX/interface_authorized_default
Allow interfaces per default::
$ echo 1 > /sys/bus/usb/devices/usbX/interface_authorized_default
Deny interfaces per default::
Deny interfaces per default:
$ echo 0 > /sys/bus/usb/devices/usbX/interface_authorized_default
$ echo 0 > /sys/bus/usb/devices/usbX/interface_authorized_default
Per default the interface_authorized_default bit is 1.
So all interfaces would authorized per default.
Note:
If a deauthorized interface will be authorized so the driver probing must
be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe
If a deauthorized interface will be authorized so the driver probing must
be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe
For drivers that need multiple interfaces all needed interfaces should be
authorized first. After that the drivers should be probed.
......
Documentation/usb/chipidea.txt
View file @ 132d68d3
==============================================
ChipIdea Highspeed Dual Role Controller Driver
==============================================
1. How to test OTG FSM(HNP and SRP)
-----------------------------------
To show how to demo OTG HNP and SRP functions via sys input files
with 2 Freescale i.MX6Q sabre SD boards.
1.1 How to enable OTG FSM
---------------------------------------
-------------------------
1.1.1 Select CONFIG_USB_OTG_FSM in menuconfig, rebuild kernel
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Image and modules. If you want to check some internal
variables for otg fsm, mount debugfs, there are 2 files
which can show otg fsm variables and some controller registers value:
cat /sys/kernel/debug/ci_hdrc.0/otg
cat /sys/kernel/debug/ci_hdrc.0/registers
which can show otg fsm variables and some controller registers value::
cat /sys/kernel/debug/ci_hdrc.0/otg
cat /sys/kernel/debug/ci_hdrc.0/registers
1.1.2 Add below entries in your dts file for your controller node
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
::
otg-rev = <0x0200>;
adp-disable;
1.2 Test operations
-------------------
1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded
(e.g. g_mass_storage).
......@@ -26,19 +41,24 @@ cat /sys/kernel/debug/ci_hdrc.0/registers
The A-device(with micro A plug inserted) should enumerate B-device.
3) Role switch
On B-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
B-device should take host role and enumerate A-device.
4) A-device switch back to host.
On B-device:
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
or, by introducing HNP polling, B-Host can know when A-peripheral wish
to be host role, so this role switch also can be trigged in A-peripheral
side by answering the polling from B-Host, this can be done on A-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
side by answering the polling from B-Host, this can be done on A-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
A-device should switch back to host and enumerate B-device.
......@@ -49,23 +69,31 @@ cat /sys/kernel/debug/ci_hdrc.0/registers
A-device should NOT enumerate B-device.
if A-device wants to use bus:
On A-device:
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
On A-device::
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
if B-device wants to use bus:
On B-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
7) A-device power down the bus.
On A-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
On A-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
A-device should disconnect with B-device and power down the bus.
8) B-device does data pulse for SRP.
On B-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
A-device should resume usb bus and enumerate B-device.
......@@ -75,22 +103,31 @@ cat /sys/kernel/debug/ci_hdrc.0/registers
July 27, 2012 Revision 2.0 version 1.1a"
2. How to enable USB as system wakeup source
-----------------------------------
--------------------------------------------
Below is the example for how to enable USB as system wakeup source
at imx6 platform.
2.1 Enable core's wakeup
echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup
2.2 Enable glue layer's wakeup
echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup
2.3 Enable PHY's wakeup (optional)
echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup
2.4 Enable roothub's wakeup
echo enabled > /sys/bus/usb/devices/usb1/power/wakeup
2.5 Enable related device's wakeup
echo enabled > /sys/bus/usb/devices/1-1/power/wakeup
2.1 Enable core's wakeup::
echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup
2.2 Enable glue layer's wakeup::
echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup
2.3 Enable PHY's wakeup (optional)::
echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup
2.4 Enable roothub's wakeup::
echo enabled > /sys/bus/usb/devices/usb1/power/wakeup
2.5 Enable related device's wakeup::
echo enabled > /sys/bus/usb/devices/1-1/power/wakeup
If the system has only one usb port, and you want usb wakeup at this port, you
can use below script to enable usb wakeup.
for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done;
can use below script to enable usb wakeup::
for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done;
Documentation/usb/dwc3.txt
View file @ 132d68d3
===========
DWC3 driver
===========
TODO
~~~~
TODO
~~~~~~
Please pick something while reading :)
- Convert interrupt handler to per-ep-thread-irq
......@@ -9,6 +14,7 @@ Please pick something while reading :)
until the command completes which is bad.
Implementation idea:
- dwc core implements a demultiplexing irq chip for interrupts per
endpoint. The interrupt numbers are allocated during probe and belong
to the device. If MSI provides per-endpoint interrupt this dummy
......@@ -19,6 +25,7 @@ Please pick something while reading :)
- dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout()
until the command completes.
- the interrupt handler is split into the following pieces:
- primary handler of the device
goes through every event and calls generic_handle_irq() for event
it. On return from generic_handle_irq() in acknowledges the event
......@@ -40,6 +47,7 @@ Please pick something while reading :)
for command completion.
Latency:
There should be no increase in latency since the interrupt-thread has a
high priority and will be run before an average task in user land
(except the user changed priorities).
Documentation/usb/ehci.txt
View file @ 132d68d3
===========
EHCI driver
===========
27-Dec-2002
The EHCI driver is used to talk to high speed USB 2.0 devices using
......@@ -40,7 +44,8 @@ APIs exposed to USB device drivers.
<dbrownell@users.sourceforge.net>
FUNCTIONALITY
Functionality
=============
This driver is regularly tested on x86 hardware, and has also been
used on PPC hardware so big/little endianness issues should be gone.
......@@ -48,6 +53,7 @@ It's believed to do all the right PCI magic so that I/O works even on
systems with interesting DMA mapping issues.
Transfer Types
--------------
At this writing the driver should comfortably handle all control, bulk,
and interrupt transfers, including requests to USB 1.1 devices through
......@@ -63,6 +69,7 @@ since EHCI represents these with a different data structure. So for now,
most USB audio and video devices can't be connected to high speed buses.
Driver Behavior
---------------
Transfers of all types can be queued. This means that control transfers
from a driver on one interface (or through usbfs) won't interfere with
......@@ -83,14 +90,15 @@ limits on the number of periodic transactions that can be scheduled,
and prevent use of polling intervals of less than one frame.
USE BY
Use by
======
Assuming you have an EHCI controller (on a PCI card or motherboard)
and have compiled this driver as a module, load this like:
and have compiled this driver as a module, load this like::
# modprobe ehci-hcd
and remove it by:
and remove it by::
# rmmod ehci-hcd
......@@ -112,13 +120,16 @@ If you're using this driver on a 2.5 kernel, and you've enabled USB
debugging support, you'll see three files in the "sysfs" directory for
any EHCI controller:
"async" dumps the asynchronous schedule, used for control
"async"
dumps the asynchronous schedule, used for control
and bulk transfers. Shows each active qh and the qtds
pending, usually one qtd per urb. (Look at it with
usb-storage doing disk I/O; watch the request queues!)
"periodic" dumps the periodic schedule, used for interrupt
"periodic"
dumps the periodic schedule, used for interrupt
and isochronous transfers. Doesn't show qtds.
"registers" show controller register state, and
"registers"
show controller register state, and
The contents of those files can help identify driver problems.
......@@ -136,7 +147,8 @@ transaction translators are in use; some drivers have been seen to behave
badly when they see different faults than OHCI or UHCI report.
PERFORMANCE
Performance
===========
USB 2.0 throughput is gated by two main factors: how fast the host
controller can process requests, and how fast devices can respond to
......@@ -156,6 +168,7 @@ hardware and device driver software allow it. Periodic transfer modes
approach the quoted 480 MBit/sec transfer rate.
Hardware Performance
--------------------
At this writing, individual USB 2.0 devices tend to max out at around
20 MByte/sec transfer rates. This is of course subject to change;
......@@ -183,6 +196,7 @@ you issue a control or bulk request you can often expect to learn that
it completed in less than 250 usec (depending on transfer size).
Software Performance
--------------------
To get even 20 MByte/sec transfer rates, Linux-USB device drivers will
need to keep the EHCI queue full. That means issuing large requests,
......@@ -206,9 +220,11 @@ mapping (which might apply an IOMMU) and IRQ reduction, all of which will
help make high speed transfers run as fast as they can.
TBD: Interrupt and ISO transfer performance issues. Those periodic
transfers are fully scheduled, so the main issue is likely to be how
to trigger "high bandwidth" modes.
TBD:
Interrupt and ISO transfer performance issues. Those periodic
transfers are fully scheduled, so the main issue is likely to be how
to trigger "high bandwidth" modes.
TBD: More than standard 80% periodic bandwidth allocation is possible
through sysfs uframe_periodic_max parameter. Describe that.
TBD:
More than standard 80% periodic bandwidth allocation is possible
through sysfs uframe_periodic_max parameter. Describe that.
Documentation/usb/functionfs.txt
View file @ 132d68d3
*How FunctionFS works*
====================
How FunctionFS works
====================
From kernel point of view it is just a composite function with some
unique behaviour. It may be added to an USB configuration only after
......@@ -38,13 +40,13 @@ when mounting.
One can imagine a gadget that has an Ethernet, MTP and HID interfaces
where the last two are implemented via FunctionFS. On user space
level it would look like this:
level it would look like this::
$ insmod g_ffs.ko idVendor=<ID> iSerialNumber=<string> functions=mtp,hid
$ mkdir /dev/ffs-mtp && mount -t functionfs mtp /dev/ffs-mtp
$ ( cd /dev/ffs-mtp && mtp-daemon ) &
$ mkdir /dev/ffs-hid && mount -t functionfs hid /dev/ffs-hid
$ ( cd /dev/ffs-hid && hid-daemon ) &
$ insmod g_ffs.ko idVendor=<ID> iSerialNumber=<string> functions=mtp,hid
$ mkdir /dev/ffs-mtp && mount -t functionfs mtp /dev/ffs-mtp
$ ( cd /dev/ffs-mtp && mtp-daemon ) &
$ mkdir /dev/ffs-hid && mount -t functionfs hid /dev/ffs-hid
$ ( cd /dev/ffs-hid && hid-daemon ) &
On kernel level the gadget checks ffs_data->dev_name to identify
whether it's FunctionFS designed for MTP ("mtp") or HID ("hid").
......@@ -64,4 +66,3 @@ have been written to their ep0's.
Conversely, the gadget is unregistered after the first USB function
closes its endpoints.
Documentation/usb/gadget-testing.txt
View file @ 132d68d3
This diff is collapsed.
Documentation/usb/gadget_configfs.txt
View file @ 132d68d3
This diff is collapsed.
Documentation/usb/gadget_hid.txt
View file @ 132d68d3
Linux USB HID gadget driver
===========================
Linux USB HID gadget driver
===========================
Introduction
============
The HID Gadget driver provides emulation of USB Human Interface
Devices (HID). The basic HID handling is done in the kernel,
and HID reports can be sent/received through I/O on the
/dev/hidgX character devices.
The HID Gadget driver provides emulation of USB Human Interface
Devices (HID). The basic HID handling is done in the kernel,
and HID reports can be sent/received through I/O on the
/dev/hidgX character devices.
For more details about HID, see the developer page on
http://www.usb.org/developers/hidpage/
For more details about HID, see the developer page on
http://www.usb.org/developers/hidpage/
Configuration
=============
g_hid is a platform driver, so to use it you need to add
struct platform_device(s) to your platform code defining the
HID function descriptors you want to use - E.G. something
like:
g_hid is a platform driver, so to use it you need to add
struct platform_device(s) to your platform code defining the
HID function descriptors you want to use - E.G. something
like::
#include <linux/platform_device.h>
#include <linux/usb/g_hid.h>
#include <linux/platform_device.h>
#include <linux/usb/g_hid.h>
/* hid descriptor for a keyboard */
static struct hidg_func_descriptor my_hid_data = {
/* hid descriptor for a keyboard */
static struct hidg_func_descriptor my_hid_data = {
.subclass = 0, /* No subclass */
.protocol = 1, /* Keyboard */
.report_length = 8,
......@@ -61,85 +64,87 @@ static struct hidg_func_descriptor my_hid_data = {
0x81, 0x00, /* INPUT (Data,Ary,Abs) */
0xc0 /* END_COLLECTION */
}
};
};
static struct platform_device my_hid = {
static struct platform_device my_hid = {
.name = "hidg",
.id = 0,
.num_resources = 0,
.resource = 0,
.dev.platform_data = &my_hid_data,
};
};
You can add as many HID functions as you want, only limited by
the amount of interrupt endpoints your gadget driver supports.
You can add as many HID functions as you want, only limited by
the amount of interrupt endpoints your gadget driver supports.
Configuration with configfs
===========================
Instead of adding fake platform devices and drivers in order to pass
some data to the kernel, if HID is a part of a gadget composed with
configfs the hidg_func_descriptor.report_desc is passed to the kernel
by writing the appropriate stream of bytes to a configfs attribute.
Instead of adding fake platform devices and drivers in order to pass
some data to the kernel, if HID is a part of a gadget composed with
configfs the hidg_func_descriptor.report_desc is passed to the kernel
by writing the appropriate stream of bytes to a configfs attribute.
Send and receive HID reports
============================
HID reports can be sent/received using read/write on the
/dev/hidgX character devices. See below for an example program
to do this.
HID reports can be sent/received using read/write on the
/dev/hidgX character devices. See below for an example program
to do this.
hid_gadget_test is a small interactive program to test the HID
gadget driver. To use, point it at a hidg device and set the
device type (keyboard / mouse / joystick) - E.G.:
hid_gadget_test is a small interactive program to test the HID
gadget driver. To use, point it at a hidg device and set the
device type (keyboard / mouse / joystick) - E.G.::
# hid_gadget_test /dev/hidg0 keyboard
# hid_gadget_test /dev/hidg0 keyboard
You are now in the prompt of hid_gadget_test. You can type any
combination of options and values. Available options and
values are listed at program start. In keyboard mode you can
send up to six values.
You are now in the prompt of hid_gadget_test. You can type any
combination of options and values. Available options and
values are listed at program start. In keyboard mode you can
send up to six values.
For example type: g i s t r --left-shift
For example type: g i s t r --left-shift
Hit return and the corresponding report will be sent by the
HID gadget.
Hit return and the corresponding report will be sent by the
HID gadget.
Another interesting example is the caps lock test. Type
--caps-lock and hit return. A report is then sent by the
gadget and you should receive the host answer, corresponding
to the caps lock LED status.
Another interesting example is the caps lock test. Type
--caps-lock and hit return. A report is then sent by the
gadget and you should receive the host answer, corresponding
to the caps lock LED status::
--caps-lock
recv report:2
--caps-lock
recv report:2
With this command:
With this command::
# hid_gadget_test /dev/hidg1 mouse
# hid_gadget_test /dev/hidg1 mouse
You can test the mouse emulation. Values are two signed numbers.
You can test the mouse emulation. Values are two signed numbers.
Sample code
Sample code::
/* hid_gadget_test */
/* hid_gadget_test */
#include <pthread.h>
#include <string.h>
#include <stdio.h>
#include <ctype.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <pthread.h>
#include <string.h>
#include <stdio.h>
#include <ctype.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#define BUF_LEN 512
#define BUF_LEN 512
struct options {
struct options {
const char *opt;
unsigned char val;
};
};
static struct options kmod[] = {
static struct options kmod[] = {
{.opt = "--left-ctrl", .val = 0x01},
{.opt = "--right-ctrl", .val = 0x10},
{.opt = "--left-shift", .val = 0x02},
......@@ -149,9 +154,9 @@ static struct options kmod[] = {
{.opt = "--left-meta", .val = 0x08},
{.opt = "--right-meta", .val = 0x80},
{.opt = NULL}
};
};
static struct options kval[] = {
static struct options kval[] = {
{.opt = "--return", .val = 0x28},
{.opt = "--esc", .val = 0x29},
{.opt = "--bckspc", .val = 0x2a},
......@@ -183,10 +188,10 @@ static struct options kval[] = {
{.opt = "--up", .val = 0x52},
{.opt = "--num-lock", .val = 0x53},
{.opt = NULL}
};
};
int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
char *tok = strtok(buf, " ");
int key = 0;
int i = 0;
......@@ -229,17 +234,17 @@ int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
fprintf(stderr, "unknown option: %s\n", tok);
}
return 8;
}
}
static struct options mmod[] = {
static struct options mmod[] = {
{.opt = "--b1", .val = 0x01},
{.opt = "--b2", .val = 0x02},
{.opt = "--b3", .val = 0x04},
{.opt = NULL}
};
};
int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
char *tok = strtok(buf, " ");
int mvt = 0;
int i = 0;
......@@ -274,9 +279,9 @@ int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
fprintf(stderr, "unknown option: %s\n", tok);
}
return 3;
}
}
static struct options jmod[] = {
static struct options jmod[] = {
{.opt = "--b1", .val = 0x10},
{.opt = "--b2", .val = 0x20},
{.opt = "--b3", .val = 0x40},
......@@ -287,10 +292,10 @@ static struct options jmod[] = {
{.opt = "--hat4", .val = 0x03},
{.opt = "--hatneutral", .val = 0x04},
{.opt = NULL}
};
};
int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
char *tok = strtok(buf, " ");
int mvt = 0;
int i = 0;
......@@ -326,10 +331,10 @@ int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
fprintf(stderr, "unknown option: %s\n", tok);
}
return 4;
}
}
void print_options(char c)
{
void print_options(char c)
{
int i = 0;
if (c == 'k') {
......@@ -358,10 +363,10 @@ void print_options(char c)
" three signed numbers\n"
"--quit to close\n");
}
}
}
int main(int argc, const char *argv[])
{
int main(int argc, const char *argv[])
{
const char *filename = NULL;
int fd = 0;
char buf[BUF_LEN];
......@@ -449,4 +454,4 @@ int main(int argc, const char *argv[])
close(fd);
return 0;
}
}
Documentation/usb/gadget_multi.txt
View file @ 132d68d3
-*- org -*-
==============================
Multifunction Composite Gadget
==============================
* Overview
Overview
========
The Multifunction Composite Gadget (or g_multi) is a composite gadget
that makes extensive use of the composite framework to provide
......@@ -17,13 +20,15 @@ have two configurations -- one with RNDIS and another with CDC ECM[3].
Please note that if you use non-standard configuration (that is enable
CDC ECM) you may need to change vendor and/or product ID.
* Host drivers
Host drivers
============
To make use of the gadget one needs to make it work on host side --
without that there's no hope of achieving anything with the gadget.
As one might expect, things one need to do very from system to system.
** Linux host drivers
Linux host drivers
------------------
Since the gadget uses standard composite framework and appears as such
to Linux host it does not need any additional drivers on Linux host
......@@ -34,11 +39,13 @@ This is also true for two configuration set-up with RNDIS
configuration being the first one. Linux host will use the second
configuration with CDC ECM which should work better under Linux.
** Windows host drivers
Windows host drivers
--------------------
For the gadget to work under Windows two conditions have to be met:
*** Detecting as composite gadget
Detecting as composite gadget
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
First of all, Windows need to detect the gadget as an USB composite
gadget which on its own have some conditions[4]. If they are met,
......@@ -53,7 +60,8 @@ The only thing to worry is that the gadget has to have a single
configuration so a dual RNDIS and CDC ECM gadget won't work unless you
create a proper INF -- and of course, if you do submit it!
*** Installing drivers for each function
Installing drivers for each function
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The other, trickier thing is making Windows install drivers for each
individual function.
......@@ -63,7 +71,8 @@ implementing USB Mass Storage class and selects appropriate driver.
Things are harder with RDNIS and CDC ACM.
**** RNDIS
RNDIS
.....
To make Windows select RNDIS drivers for the first function in the
gadget, one needs to use the [[file:linux.inf]] file provided with this
......@@ -75,11 +84,13 @@ RNDIS was not the first interface. You do not need to worry abut it
unless you are trying to develop your own gadget in which case watch
out for this bug.
**** CDC ACM
CDC ACM
.......
Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM.
**** Customising the gadget
Customising the gadget
......................
If you intend to hack the g_multi gadget be advised that rearranging
functions will obviously change interface numbers for each of the
......@@ -97,14 +108,16 @@ things don't work as intended before realising Windows have cached
some drivers information (changing USB port may sometimes help plus
you might try using USBDeview[8] to remove the phantom device).
**** INF testing
INF testing
...........
Provided INF files have been tested on Windows XP SP3, Windows Vista
and Windows 7, all 32-bit versions. It should work on 64-bit versions
as well. It most likely won't work on Windows prior to Windows XP
SP2.
** Other systems
Other systems
-------------
At this moment, drivers for any other systems have not been tested.
Knowing how MacOS is based on BSD and BSD is an Open Source it is
......@@ -115,7 +128,8 @@ For more exotic systems I have even less to say...
Any testing and drivers *are* *welcome*!
* Authors
Authors
=======
This document has been written by Michal Nazarewicz
([[mailto:mina86@mina86.com]]). INF files have been hacked with
......@@ -124,7 +138,8 @@ Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS
template[9], Microchip's CDC ACM INF file and David Brownell's
([[mailto:dbrownell@users.sourceforge.net]]) original INF files.
* Footnotes
Footnotes
=========
[1] Remote Network Driver Interface Specification,
[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
......
Documentation/usb/gadget_printer.txt
View file @ 132d68d3
===============================
Linux USB Printer Gadget Driver
===============================
Linux USB Printer Gadget Driver
06/04/2007
06/04/2007
Copyright (C) 2007 Craig W. Nadler <craig@nadler.us>
Copyright (C) 2007 Craig W. Nadler <craig@nadler.us>
GENERAL
General
=======
This driver may be used if you are writing printer firmware using Linux as
......@@ -29,52 +31,60 @@ user space firmware can read or write this status byte using a device file
HOWTO USE THIS DRIVER
Howto Use This Driver
=====================
To load the USB device controller driver and the printer gadget driver. The
following example uses the Netchip 2280 USB device controller driver:
following example uses the Netchip 2280 USB device controller driver::
modprobe net2280
modprobe g_printer
modprobe net2280
modprobe g_printer
The follow command line parameter can be used when loading the printer gadget
(ex: modprobe g_printer idVendor=0x0525 idProduct=0xa4a8 ):
idVendor - This is the Vendor ID used in the device descriptor. The default is
idVendor
This is the Vendor ID used in the device descriptor. The default is
the Netchip vendor id 0x0525. YOU MUST CHANGE TO YOUR OWN VENDOR ID
BEFORE RELEASING A PRODUCT. If you plan to release a product and don't
already have a Vendor ID please see www.usb.org for details on how to
get one.
idProduct - This is the Product ID used in the device descriptor. The default
idProduct
This is the Product ID used in the device descriptor. The default
is 0xa4a8, you should change this to an ID that's not used by any of
your other USB products if you have any. It would be a good idea to
start numbering your products starting with say 0x0001.
bcdDevice - This is the version number of your product. It would be a good idea
bcdDevice
This is the version number of your product. It would be a good idea
to put your firmware version here.
iManufacturer - A string containing the name of the Vendor.
iManufacturer
A string containing the name of the Vendor.
iProduct - A string containing the Product Name.
iProduct
A string containing the Product Name.
iSerialNum - A string containing the Serial Number. This should be changed for
iSerialNum
A string containing the Serial Number. This should be changed for
each unit of your product.
iPNPstring - The PNP ID string used for this printer. You will want to set
iPNPstring
The PNP ID string used for this printer. You will want to set
either on the command line or hard code the PNP ID string used for
your printer product.
qlen - The number of 8k buffers to use per endpoint. The default is 10, you
qlen
The number of 8k buffers to use per endpoint. The default is 10, you
should tune this for your product. You may also want to tune the
size of each buffer for your product.
USING THE EXAMPLE CODE
Using The Example Code
======================
This example code talks to stdout, instead of a print engine.
......@@ -82,22 +92,23 @@ This example code talks to stdout, instead of a print engine.
To compile the test code below:
1) save it to a file called prn_example.c
2) compile the code with the follow command:
2) compile the code with the follow command::
gcc prn_example.c -o prn_example
To read printer data from the host to stdout:
To read printer data from the host to stdout::
# prn_example -read_data
To write printer data from a file (data_file) to the host:
To write printer data from a file (data_file) to the host::
# cat data_file | prn_example -write_data
To get the current printer status for the gadget driver:
To get the current printer status for the gadget driver:::
# prn_example -get_status
......@@ -107,60 +118,62 @@ To get the current printer status for the gadget driver:
Printer OK
To set printer to Selected/On-line:
To set printer to Selected/On-line::
# prn_example -selected
To set printer to Not Selected/Off-line:
To set printer to Not Selected/Off-line::
# prn_example -not_selected
To set paper status to paper out:
To set paper status to paper out::
# prn_example -paper_out
To set paper status to paper loaded:
To set paper status to paper loaded::
# prn_example -paper_loaded
To set error status to printer OK:
To set error status to printer OK::
# prn_example -no_error
To set error status to ERROR:
To set error status to ERROR::
# prn_example -error
EXAMPLE CODE
Example Code
============
::
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <linux/poll.h>
#include <sys/ioctl.h>
#include <linux/usb/g_printer.h>
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <linux/poll.h>
#include <sys/ioctl.h>
#include <linux/usb/g_printer.h>
#define PRINTER_FILE "/dev/g_printer"
#define BUF_SIZE 512
#define PRINTER_FILE "/dev/g_printer"
#define BUF_SIZE 512
/*
* 'usage()' - Show program usage.
*/
/*
* 'usage()' - Show program usage.
*/
static void
usage(const char *option) /* I - Option string or NULL */
{
static void
usage(const char *option) /* I - Option string or NULL */
{
if (option) {
fprintf(stderr,"prn_example: Unknown option \"%s\"!\n",
option);
......@@ -186,12 +199,12 @@ usage(const char *option) /* I - Option string or NULL */
fputs("\n\n", stderr);
exit(1);
}
}
static int
read_printer_data()
{
static int
read_printer_data()
{
struct pollfd fd[1];
/* Open device file for printer gadget. */
......@@ -236,12 +249,12 @@ read_printer_data()
close(fd[0].fd);
return 0;
}
}
static int
write_printer_data()
{
static int
write_printer_data()
{
struct pollfd fd[1];
/* Open device file for printer gadget. */
......@@ -295,12 +308,12 @@ write_printer_data()
close(fd[0].fd);
return 0;
}
}
static int
read_NB_printer_data()
{
static int
read_NB_printer_data()
{
int fd;
static char buf[BUF_SIZE];
int bytes_read;
......@@ -329,12 +342,12 @@ read_NB_printer_data()
close(fd);
return 0;
}
}
static int
get_printer_status()
{
static int
get_printer_status()
{
int retval;
int fd;
......@@ -357,12 +370,12 @@ get_printer_status()
close(fd);
return(retval);
}
}
static int
set_printer_status(unsigned char buf, int clear_printer_status_bit)
{
static int
set_printer_status(unsigned char buf, int clear_printer_status_bit)
{
int retval;
int fd;
......@@ -397,12 +410,12 @@ set_printer_status(unsigned char buf, int clear_printer_status_bit)
close(fd);
return 0;
}
}
static int
display_printer_status()
{
static int
display_printer_status()
{
char printer_status;
printer_status = get_printer_status();
......@@ -429,12 +442,12 @@ display_printer_status()
}
return(0);
}
}
int
main(int argc, char *argv[])
{
int
main(int argc, char *argv[])
{
int i; /* Looping var */
int retval = 0;
......@@ -507,4 +520,4 @@ main(int argc, char *argv[])
}
exit(retval);
}
}
Documentation/usb/gadget_serial.txt
View file @ 132d68d3
===============================
Linux Gadget Serial Driver v2.0
===============================
Linux Gadget Serial Driver v2.0
11/20/2004
(updated 8-May-2008 for v2.3)
11/20/2004
(updated 8-May-2008 for v2.3)
License and Disclaimer
......@@ -56,7 +59,7 @@ hardware; for example, a PDA, an embedded Linux system, or a PC
with a USB development card.
The gadget serial driver talks over USB to either a CDC ACM driver
or a generic USB serial driver running on a host PC.
or a generic USB serial driver running on a host PC::
Host
--------------------------------------
......@@ -112,11 +115,11 @@ configuring the kernel. Then rebuild and install the kernel or
modules.
Then you must load the gadget serial driver. To load it as an
ACM device (recommended for interoperability), do this:
ACM device (recommended for interoperability), do this::
modprobe g_serial
To load it as a vendor specific bulk in/out device, do this:
To load it as a vendor specific bulk in/out device, do this::
modprobe g_serial use_acm=0
......@@ -127,7 +130,7 @@ desired.
Your system should use mdev (from busybox) or udev to make the
device nodes. After this gadget driver has been set up you should
then see a /dev/ttyGS0 node:
then see a /dev/ttyGS0 node::
# ls -l /dev/ttyGS0 | cat
crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0
......@@ -187,24 +190,24 @@ support".
Once the gadget serial driver is loaded and the USB device connected
to the Linux host with a USB cable, the host system should recognize
the gadget serial device. For example, the command
the gadget serial device. For example, the command::
cat /sys/kernel/debug/usb/devices
should show something like this:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a7 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
should show something like this:::
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a7 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
If the host side Linux system is configured properly, the ACM driver
should be loaded automatically. The command "lsmod" should show the
......@@ -219,29 +222,29 @@ Serial Converter support", and for the "USB Generic Serial Driver".
Once the gadget serial driver is loaded and the USB device connected
to the Linux host with a USB cable, the host system should recognize
the gadget serial device. For example, the command
the gadget serial device. For example, the command::
cat /sys/kernel/debug/usb/devices
should show something like this:
should show something like this:::
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a6 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a6 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
You must load the usbserial driver and explicitly set its parameters
to configure it to recognize the gadget serial device, like this:
to configure it to recognize the gadget serial device, like this::
echo 0x0525 0xA4A6 >/sys/bus/usb-serial/drivers/generic/new_id
The legacy way is to use module parameters:
The legacy way is to use module parameters::
modprobe usbserial vendor=0x0525 product=0xA4A6
......
Documentation/usb/iuu_phoenix.txt
View file @ 132d68d3
=============================
Infinity Usb Unlimited Readme
-----------------------------
=============================
Hi all,
......@@ -19,7 +20,8 @@ have his own device file(/dev/ttyUSB0,/dev/ttyUSB1,...)
How to tune the reader speed ?
How to tune the reader speed?
=============================
A few parameters can be used at load time
To use parameters, just unload the module if it is
......@@ -27,26 +29,33 @@ How to tune the reader speed ?
In case of prebuilt module, use the command
insmod iuu_phoenix param=value.
Example:
Example::
modprobe iuu_phoenix clockmode=3
modprobe iuu_phoenix clockmode=3
The parameters are:
parm: clockmode:1=3Mhz579,2=3Mhz680,3=6Mhz (int)
parm: boost:overclock boost percent 100 to 500 (int)
parm: cdmode:Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
parm: xmas:xmas color enabled or not (bool)
parm: debug:Debug enabled or not (bool)
clockmode:
1=3Mhz579,2=3Mhz680,3=6Mhz (int)
boost:
overclock boost percent 100 to 500 (int)
cdmode:
Card detect mode
0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
xmas:
xmas color enabled or not (bool)
debug:
Debug enabled or not (bool)
- clockmode will provide 3 different base settings commonly adopted by
different software:
1. 3Mhz579
1. 3Mhz579
2. 3Mhz680
3. 6Mhz
- boost provide a way to overclock the reader ( my favorite :-) )
For example to have best performance than a simple clockmode=3, try this:
For example to have best performance than a simple clockmode=3, try this::
modprobe boost=195
......@@ -66,7 +75,8 @@ How to tune the reader speed ?
- debug will produce a lot of debugging messages...
Last notes:
Last notes
==========
Don't worry about the serial settings, the serial emulation
is an abstraction, so use any speed or parity setting will
......
Documentation/usb/mass-storage.txt
View file @ 132d68d3
* Overview
=========================
Mass Storage Gadget (MSG)
=========================
Overview
========
Mass Storage Gadget (or MSG) acts as a USB Mass Storage device,
appearing to the host as a disk or a CD-ROM drive. It supports
......@@ -24,7 +29,8 @@
(which is no longer included in Linux). It will talk only briefly
about how to use MSF within composite gadgets.
* Module parameters
Module parameters
=================
The mass storage gadget accepts the following mass storage specific
module parameters:
......@@ -146,7 +152,8 @@
- iProduct -- USB Product string (string)
- iSerialNumber -- SerialNumber string (sting)
* sysfs entries
sysfs entries
=============
For each logical unit, the gadget creates a directory in the sysfs
hierarchy. Inside of it the following three files are created:
......@@ -177,7 +184,8 @@
Other then those, as usual, the values of module parameters can be
read from /sys/module/g_mass_storage/parameters/* files.
* Other gadgets using mass storage function
Other gadgets using mass storage function
=========================================
The Mass Storage Gadget uses the Mass Storage Function to handle
mass storage protocol. As a composite function, MSF may be used by
......@@ -193,7 +201,8 @@
may take a look at mass_storage.c, acm_ms.c and multi.c (sorted by
complexity).
* Relation to file storage gadget
Relation to file storage gadget
===============================
The Mass Storage Function and thus the Mass Storage Gadget has been
based on the File Storage Gadget. The difference between the two is
......
Documentation/usb/misc_usbsevseg.txt
View file @ 132d68d3
=============================
USB 7-Segment Numeric Display
=============================
Manufactured by Delcom Engineering
Device Information
......@@ -13,9 +16,13 @@ Device Modes
------------
By default, the driver assumes the display is only 6 characters
The mode for 6 characters is:
MSB 0x06; LSB 0x3f
For the 8 character display:
MSB 0x08; LSB 0xff
The device can accept "text" either in raw, hex, or ascii textmode.
raw controls each segment manually,
hex expects a value between 0-15 per character,
......@@ -42,5 +49,3 @@ Device Operation
To set multiple decimals points sum up each power.
For example, to set the 0th and 3rd decimal place
echo 1001 > /sys/bus/usb/.../decimals
Documentation/usb/mtouchusb.txt
View file @ 132d68d3
CHANGES
================
mtouchusb driver
================
Changes
=======
- 0.3 - Created based off of scanner & INSTALL from the original touchscreen
driver on freecode (http://freecode.com/projects/3mtouchscreendriver)
- Amended for linux-2.4.18, then 2.4.19
- 0.5 - Complete rewrite using Linux Input in 2.6.3
Unfortunately no calibration support at this time
Unfortunately no calibration support at this time
- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
Changed reset from standard USB dev reset to vendor reset
Changed data sent to host from compensated to raw coordinates
Eliminated vendor/product module params
Performed multiple successful tests with an EXII-5010UC
Changed reset from standard USB dev reset to vendor reset
Changed data sent to host from compensated to raw coordinates
Eliminated vendor/product module params
Performed multiple successful tests with an EXII-5010UC
Supported Hardware
==================
SUPPORTED HARDWARE:
::
All controllers have the Vendor: 0x0596 & Product: 0x0001
......@@ -29,9 +37,10 @@ SUPPORTED HARDWARE:
USB Capacitive - Black Case EXII-5030UC
USB Capacitive - No Case EXII-5050UC
DRIVER NOTES:
Driver Notes
============
Installation is simple, you only need to add Linux Input, Linux USB, and the
Installation is simple, you only need to add Linux Input, Linux USB, and the
driver to the kernel. The driver can also be optionally built as a module.
This driver appears to be one of possible 2 Linux USB Input Touchscreen
......@@ -49,24 +58,27 @@ The controller screen resolution is now 0 to 16384 for both X and Y reporting
the raw touch data. This is the same for the old and new capacitive USB
controllers.
Perhaps at some point an abstract function will be placed into evdev so
generic functions like calibrations, resets, and vendor information can be
Perhaps at some point an abstract function will be placed into evdev so
generic functions like calibrations, resets, and vendor information can be
requested from the userspace (And the drivers would handle the vendor specific
tasks).
TODO:
TODO
====
Implement a control urb again to handle requests to and from the device
such as calibration, etc once/if it becomes available.
DISCLAIMER:
Disclaimer
==========
I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support
I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support
this driver! If you want touch drivers only supported within X, please go to:
http://www.3m.com/3MTouchSystems/
THANKS:
Thanks
======
A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
testing!
Documentation/usb/ohci.txt
View file @ 132d68d3
====
OHCI
====
23-Aug-2002
The "ohci-hcd" driver is a USB Host Controller Driver (HCD) that is derived
......@@ -29,4 +33,3 @@ work on while the OS is getting around to the relevant IRQ processing.
- David Brownell
<dbrownell@users.sourceforge.net>
Documentation/usb/rio.txt
View file @ 132d68d3
============
Diamonds Rio
============
Copyright (C) 1999, 2000 Bruce Tenison
Portions Copyright (C) 1999, 2000 David Nelson
Thanks to David Nelson for guidance and the usage of the scanner.txt
and scanner.c files to model our driver and this informative file.
Mar. 2, 2000
CHANGES
Changes
=======
- Initial Revision
OVERVIEW
Overview
========
This README will address issues regarding how to configure the kernel
to access a RIO 500 mp3 player.
to access a RIO 500 mp3 player.
Before I explain how to use this to access the Rio500 please be warned:
W A R N I N G:
--------------
.. warning::
Please note that this software is still under development. The authors
are in no way responsible for any damage that may occur, no matter how
inconsequential.
Please note that this software is still under development. The authors
are in no way responsible for any damage that may occur, no matter how
inconsequential.
It seems that the Rio has a problem when sending .mp3 with low batteries.
I suggest when the batteries are low and you want to transfer stuff that you
replace it with a fresh one. In my case, what happened is I lost two 16kb
blocks (they are no longer usable to store information to it). But I don't
know if that's normal or not; it could simply be a problem with the flash
know if that's normal or not; it could simply be a problem with the flash
memory.
In an extreme case, I left my Rio playing overnight and the batteries wore
down to nothing and appear to have corrupted the flash memory. My RIO
needed to be replaced as a result. Diamond tech support is aware of the
problem. Do NOT allow your batteries to wear down to nothing before
changing them. It appears RIO 500 firmware does not handle low battery
power well at all.
In an extreme case, I left my Rio playing overnight and the batteries wore
down to nothing and appear to have corrupted the flash memory. My RIO
needed to be replaced as a result. Diamond tech support is aware of the
problem. Do NOT allow your batteries to wear down to nothing before
changing them. It appears RIO 500 firmware does not handle low battery
power well at all.
On systems with OHCI controllers, the kernel OHCI code appears to have
power on problems with some chipsets. If you are having problems
connecting to your RIO 500, try turning it on first and then plugging it
into the USB cable.
On systems with OHCI controllers, the kernel OHCI code appears to have
power on problems with some chipsets. If you are having problems
connecting to your RIO 500, try turning it on first and then plugging it
into the USB cable.
Contact information:
--------------------
Contact Information
-------------------
The main page for the project is hosted at sourceforge.net in the following
URL: <http://rio500.sourceforge.net>. You can also go to the project's
sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
There is also a mailing list: rio500-users@lists.sourceforge.net
Authors:
Authors
-------
Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
things work there. Bruce Tenison <btenison@dibbs.net> is adding support
for .fon files and also does testing. The program will mostly sure be
re-written and Pete Ikusz along with the rest will re-design it. I would
also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
with some important information regarding the communication with the Rio.
ADDITIONAL INFORMATION and Userspace tools
Additional Information and userspace tools
http://rio500.sourceforge.net/
http://rio500.sourceforge.net/
REQUIREMENTS
Requirements
============
A host with a USB port. Ideally, either a UHCI (Intel) or OHCI
(Compaq and others) hardware port should work.
......@@ -80,11 +88,11 @@ A Linux kernel with RIO 500 support enabled.
'lspci' which is only needed to determine the type of USB hardware
available in your machine.
CONFIGURATION
Configuration
Using `lspci -v`, determine the type of USB hardware available.
If you see something like:
If you see something like::
USB Controller: ......
Flags: .....
......@@ -92,7 +100,7 @@ Using `lspci -v`, determine the type of USB hardware available.
Then you have a UHCI based controller.
If you see something like:
If you see something like::
USB Controller: .....
Flags: ....
......@@ -107,8 +115,9 @@ hardware (determined from the steps above), 'USB Diamond Rio500 support', and
(you may need to execute `depmod -a` to update the module
dependencies).
Add a device for the USB rio500:
`mknod /dev/usb/rio500 c 180 64`
Add a device for the USB rio500::
mknod /dev/usb/rio500 c 180 64
Set appropriate permissions for /dev/usb/rio500 (don't forget about
group and world permissions). Both read and write permissions are
......@@ -116,12 +125,14 @@ required for proper operation.
Load the appropriate modules (if compiled as modules):
OHCI:
OHCI::
modprobe usbcore
modprobe usb-ohci
modprobe rio500
UHCI:
UHCI::
modprobe usbcore
modprobe usb-uhci (or uhci)
modprobe rio500
......@@ -129,10 +140,10 @@ Load the appropriate modules (if compiled as modules):
That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
be able to access the rio500.
BUGS
Bugs
====
If you encounter any problems feel free to drop me an email.
Bruce Tenison
btenison@dibbs.net
Documentation/usb/usb-help.txt
View file @ 132d68d3
usb-help.txt
==============
USB references
==============
2008-Mar-7
For USB help other than the readme files that are located in
Documentation/usb/*, see the following:
`Documentation/usb/*`, see the following:
Linux-USB project: http://www.linux-usb.org
mirrors at http://usb.in.tum.de/linux-usb/
and http://it.linux-usb.org
Linux USB Guide: http://linux-usb.sourceforge.net
Linux-USB device overview (working devices and drivers):
http://www.qbik.ch/usb/devices/
- Linux-USB project: http://www.linux-usb.org
mirrors at http://usb.in.tum.de/linux-usb/
and http://it.linux-usb.org
- Linux USB Guide: http://linux-usb.sourceforge.net
- Linux-USB device overview (working devices and drivers):
http://www.qbik.ch/usb/devices/
The Linux-USB mailing list is at linux-usb@vger.kernel.org
###
Documentation/usb/usb-serial.txt
View file @ 132d68d3
This diff is collapsed.
Documentation/usb/usbip_protocol.txt
View file @ 132d68d3
This diff is collapsed.
Documentation/usb/usbmon.txt
View file @ 132d68d3
This diff is collapsed.
MAINTAINERS
View file @ 132d68d3
......@@ -15377,6 +15377,11 @@ M: Laxman Dewangan <ldewangan@nvidia.com>
S: Supported
F: drivers/spi/spi-tegra*
TEGRA XUSB PADCTL DRIVER
M: JC Kuo <jckuo@nvidia.com>
S: Supported
F: drivers/phy/tegra/xusb*
TEHUTI ETHERNET DRIVER
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
......@@ -16155,6 +16160,14 @@ L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/roles/intel-xhci-usb-role-switch.c
USB IP DRIVER FOR HISILICON KIRIN
M: Yu Chen <chenyu56@huawei.com>
M: Binghui Wang <wangbinghui@hisilicon.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
F: drivers/phy/hisilicon/phy-hi3660-usb3.c
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
......
arch/arm/boot/dts/rk3288.dtsi
View file @ 132d68d3
......@@ -616,6 +616,7 @@ usb_host1: usb@ff540000 {
dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
snps,reset-phy-on-wake;
status = "disabled";
};
......@@ -904,6 +905,8 @@ usbphy0: usb-phy@320 {
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBOTG_PHY>;
reset-names = "phy-reset";
};
usbphy1: usb-phy@334 {
......@@ -912,6 +915,8 @@ usbphy1: usb-phy@334 {
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST0_PHY>;
reset-names = "phy-reset";
};
usbphy2: usb-phy@348 {
......@@ -920,6 +925,8 @@ usbphy2: usb-phy@348 {
clocks = <&cru SCLK_OTGPHY2>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST1_PHY>;
reset-names = "phy-reset";
};
};
};
......
drivers/i2c/busses/i2c-nvidia-gpu.c
View file @ 132d68d3
......@@ -253,6 +253,12 @@ static const struct pci_device_id gpu_i2c_ids[] = {
};
MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
static const struct property_entry ccgx_props[] = {
/* Use FW built for NVIDIA (nv) only */
PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
{ }
};
static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
{
struct i2c_client *ccgx_client;
......@@ -267,6 +273,7 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
sizeof(i2cd->gpu_ccgx_ucsi->type));
i2cd->gpu_ccgx_ucsi->addr = 0x8;
i2cd->gpu_ccgx_ucsi->irq = irq;
i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
if (!ccgx_client)
return -ENODEV;
......
drivers/phy/amlogic/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/phy/amlogic/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/phy/amlogic/phy-meson-g12a-usb2.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/phy/amlogic/phy-meson-gxl-usb2.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/broadcom/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/phy/broadcom/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/phy/broadcom/phy-bcm-sr-usb.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/phy/freescale/phy-fsl-imx8mq-usb.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/hisilicon/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/phy/hisilicon/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/phy/hisilicon/phy-hi3660-usb3.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/phy/mediatek/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/phy/mediatek/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/phy/mediatek/phy-mtk-tphy.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/mediatek/phy-mtk-ufs.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/phy/mscc/phy-ocelot-serdes.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/phy-core.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-qmp.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-qmp.h
View file @ 132d68d3
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-qusb2.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-ufs-i.h
View file @ 132d68d3
This diff is collapsed.
drivers/phy/qualcomm/phy-qcom-ufs.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/renesas/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/phy/renesas/phy-rcar-gen2.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/renesas/phy-rcar-gen3-usb2.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/rockchip/phy-rockchip-emmc.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/socionext/phy-uniphier-usb3hs.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/socionext/phy-uniphier-usb3ss.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/tegra/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/phy/tegra/xusb-tegra186.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/phy/tegra/xusb.c
View file @ 132d68d3
This diff is collapsed.
drivers/phy/tegra/xusb.h
View file @ 132d68d3
This diff is collapsed.
drivers/phy/ti/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/phy/ti/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/phy/ti/phy-am654-serdes.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/phy/ti/phy-ti-pipe3.c
View file @ 132d68d3
This diff is collapsed.
drivers/scsi/ufs/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/scsi/ufs/ufs-qcom.c
View file @ 132d68d3
This diff is collapsed.
drivers/scsi/ufs/ufs-qcom.h
View file @ 132d68d3
This diff is collapsed.
drivers/soc/sunxi/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/usb/chipidea/ci_hdrc_msm.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/class/cdc-acm.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/class/cdc-acm.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/common/common.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/core/hcd.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/core/hub.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/core.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/core.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/core_intr.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/gadget.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/hcd.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/hw.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/params.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc2/platform.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/core.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/core.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/debug.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/dwc3-meson-g12a.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/dwc3-of-simple.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/dwc3/gadget.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/function/f_fs.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/function/f_ncm.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/function/f_uac1_legacy.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/function/u_ncm.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/udc/aspeed-vhub/epn.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/udc/atmel_usba_udc.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/udc/atmel_usba_udc.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/udc/dummy_hcd.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/udc/lpc32xx_udc.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/udc/net2272.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/gadget/udc/net2280.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/fhci-sched.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/u132-hcd.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci-hub.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci-mtk.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci-plat.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci-ring.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci-tegra.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci-trace.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/host/xhci.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/isp1760/isp1760-hcd.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/misc/usb251xb.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/misc/usb3503.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_core.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_debug.h 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_debugfs.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_dr.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_dr.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_gadget.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_gadget_ep0.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_hw_regs.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_plat.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_qmu.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_qmu.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_trace.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/mtu3/mtu3_trace.h 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/musb/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/usb/musb/jz4740.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/musb/musb_core.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/musb/musb_dsps.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/musb/omap2430.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/phy/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/ark3116.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/cypress_m8.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/digi_acceleport.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/f81232.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/generic.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/io_edgeport.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/iuu_phoenix.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/oti6858.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/pl2303.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/spcp8x5.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/serial/usb-serial.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/storage/scsiglue.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/storage/sierra_ms.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/storage/uas.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/altmodes/Kconfig
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/altmodes/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/altmodes/displayport.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/altmodes/displayport.h 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/altmodes/nvidia.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/mux/pi3usb30532.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/tcpm/fusb302.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/tcpm/tcpci.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/tcpm/tcpm.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/tcpm/wcove.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/ucsi/Makefile
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/ucsi/displayport.c 0 → 100644
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/ucsi/trace.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/ucsi/trace.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/ucsi/ucsi.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/ucsi/ucsi.h
View file @ 132d68d3
This diff is collapsed.
drivers/usb/typec/ucsi/ucsi_ccg.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/usbip/stub_rx.c
View file @ 132d68d3
This diff is collapsed.
drivers/usb/usbip/vhci_hcd.c
View file @ 132d68d3
This diff is collapsed.
include/dt-bindings/phy/phy-am654-serdes.h 0 → 100644
View file @ 132d68d3
This diff is collapsed.
include/linux/phy/phy.h
View file @ 132d68d3
This diff is collapsed.
include/linux/usb.h
View file @ 132d68d3
This diff is collapsed.
include/linux/usb/ch9.h
View file @ 132d68d3
This diff is collapsed.
include/linux/usb/hcd.h
View file @ 132d68d3
This diff is collapsed.
include/linux/usb/serial.h
View file @ 132d68d3
This diff is collapsed.
include/linux/usb/tcpm.h
View file @ 132d68d3
This diff is collapsed.
include/linux/usb/typec_dp.h
View file @ 132d68d3
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7