Commit 1366e010 authored by Martin Blumenstingl's avatar Martin Blumenstingl Committed by Alexandre Belloni

dt-bindings: rtc: add device-tree bindings for the Amlogic Meson RTC

The 32-bit Amlogic Meson SoCs (Meson6, Meson8, Meson8b and Meson8m2)
have a built-in RTC block.
It has the following inputs:
- an 32.768kHz crystal oscillator
- an interrupt line
- a reset line
- 0.9V voltage input
Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
[resurrected patches from Ben after 2 years]
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
parent 09832dc0
* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC
Required properties:
- compatible: should be one of the following describing the hardware:
* "amlogic,meson6-rtc"
* "amlogic,meson8-rtc"
* "amlogic,meson8b-rtc"
* "amlogic,meson8m2-rtc"
- reg: physical register space for the controller's memory mapped registers.
- interrupts: the interrupt line of the RTC block.
- clocks: reference to the external 32.768kHz crystal oscillator.
- vdd-supply: reference to the power supply of the RTC block.
- resets: reset controller reference to allow reset of the controller
Optional properties for the battery-backed non-volatile memory:
- #address-cells: should be 1 to address the battery-backed non-volatile memory
- #size-cells: should be 1 to reference the battery-backed non-volatile memory
Optional child nodes:
- see ../nvmem/nvmem.txt
Example:
rtc: rtc@740 {
compatible = "amlogic,meson6-rtc";
reg = <0x740 0x14>;
interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
clocks = <&rtc32k_xtal>;
vdd-supply = <&rtc_vdd>;
resets = <&reset RESET_RTC>;
#address-cells = <1>;
#size-cells = <1>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment