Commit 13cbd1e3 authored by Vivek Gautam's avatar Vivek Gautam Committed by Kukjin Kim

ARM: dts: Enabling ehci-s5p driver for EXYNOS5250

Adding EHCI device tree node for Exynos5250 along with
the device base adress and gpio line for vbus.
Signed-off-by: default avatarVivek Gautam <gautam.vivek@samsung.com>
Acked-by: default avatarJingoo Han <jg1.han@samsung.com>
Acked-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent ad4aebe1
Samsung Exynos SoC USB controller
The USB devices interface with USB controllers on Exynos SOCs.
The device node has following properties.
EHCI
Required properties:
- compatible: should be "samsung,exynos4210-ehci" for USB 2.0
EHCI controller in host mode.
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
Optional properties:
- samsung,vbus-gpio: if present, specifies the GPIO that
needs to be pulled up for the bus to be powered.
Example:
usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
samsung,vbus-gpio = <&gpx2 6 1 3 3>;
};
......@@ -232,6 +232,10 @@ sound {
samsung,audio-codec = <&wm8994>;
};
usb@12110000 {
samsung,vbus-gpio = <&gpx2 6 1 3 3>;
};
dp-controller {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
......
......@@ -40,4 +40,8 @@ slot@0 {
<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
};
};
usb@12110000 {
samsung,vbus-gpio = <&gpx1 1 1 3 3>;
};
};
......@@ -301,6 +301,12 @@ i2s2: i2s@12D70000 {
dma-names = "tx", "rx";
};
usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment