Skip to content

L
linux
Commit 140455fa authored by Tony Lindgren's avatar Tony Lindgren
Browse files
Options

omap2/3/4: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUS 

omap: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUS
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent a8eb7ca0
Hide whitespace changes
Inline Side-by-side
Showing with 25 additions and 47 deletions
arch/arm/mach-omap2/Kconfig
View file @ 140455fa
......@@ -29,7 +29,7 @@ config OMAP_PACKAGE_CBP
bool
comment "OMAP Board Type"
depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
......
arch/arm/plat-omap/Kconfig
View file @ 140455fa
......@@ -125,7 +125,7 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
......@@ -146,7 +146,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
help
Select this option if you want to use OMAP Dual-Mode timers.
......
arch/arm/plat-omap/dma.c
View file @ 140455fa
......@@ -1870,8 +1870,7 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
#define omap1_dma_irq_handler NULL
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
static int omap2_dma_handle_ch(int ch)
{
......
arch/arm/plat-omap/dmtimer.c
View file @ 140455fa
......@@ -153,8 +153,7 @@
struct omap_dm_timer {
unsigned long phys_base;
int irq;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
struct clk *iclk, *fclk;
#endif
void __iomem *io_base;
......@@ -490,8 +489,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
}
EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#else
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
......@@ -535,8 +533,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
/* Readback to make sure write has completed */
omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
/*
......@@ -781,8 +778,7 @@ int __init omap_dm_timer_init(void)
timer->io_base = ioremap(timer->phys_base, map_size);
BUG_ON(!timer->io_base);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
if (cpu_class_is_omap2()) {
char clk_name[16];
sprintf(clk_name, "gpt%d_ick", i + 1);
......
arch/arm/plat-omap/gpio.c
View file @ 140455fa
......@@ -177,13 +177,11 @@ struct gpio_bank {
u16 irq;
u16 virtual_irq_start;
int method;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
......@@ -592,8 +590,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
reg += OMAP7XX_GPIO_DATA_OUTPUT;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAOUT;
break;
......@@ -684,8 +681,7 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
......@@ -856,8 +852,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
goto bad;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
......@@ -1131,8 +1126,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
......@@ -1227,8 +1221,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
......@@ -1809,8 +1802,7 @@ static int __init _omap_gpio_init(void)
gpio_count = 32; /* 7xx has 32-bit GPIOs */
}
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
......@@ -1903,8 +1895,7 @@ static int __init _omap_gpio_init(void)
return 0;
}
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
......@@ -2013,8 +2004,7 @@ static struct sys_device omap_gpio_device = {
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
static int workaround_enabled;
......@@ -2240,8 +2230,7 @@ static int __init omap_gpio_sysinit(void)
mpuio_init();
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
......@@ -2300,8 +2289,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
/* FIXME for at least omap2, show pullup/pulldown state */
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
......
arch/arm/plat-omap/include/plat/clock.h
View file @ 140455fa
......@@ -26,8 +26,7 @@ struct clkops {
void (*find_companion)(struct clk *, void __iomem **, u8 *);
};
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
struct clksel_rate {
u32 val;
......@@ -89,8 +88,7 @@ struct clk {
__u8 enable_bit;
__s8 usecount;
u8 fixed_div;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
void __iomem *clksel_reg;
u32 clksel_mask;
const struct clksel *clksel;
......
arch/arm/plat-omap/include/plat/control.h
View file @ 140455fa
......@@ -309,8 +309,7 @@
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#ifdef CONFIG_ARCH_OMAP2PLUS
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
......
arch/arm/plat-omap/include/plat/mcbsp.h
View file @ 140455fa
......@@ -103,8 +103,7 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#else
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
......
arch/arm/plat-omap/include/plat/memory.h
View file @ 140455fa
......@@ -38,8 +38,7 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#else
#define PHYS_OFFSET UL(0x80000000)
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7