Commit 141586bc authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: tsc2007 - properly shut off interrupts/delayed work

Properly shut off interrupts/delayed work by free-ing IRQ first
and then ensuring that enable/disable is balanced. Also add
__devinit/__devexit markings, restore poll delay/period scheduling
logic, make sure we call exit_platform_hw() method when probe
fails.
Tested-by: default avatarRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 75fba3b0
......@@ -27,7 +27,8 @@
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#define TS_POLL_PERIOD msecs_to_jiffies(1) /* ms delay between samples */
#define TS_POLL_DELAY 1 /* ms delay between samples */
#define TS_POLL_PERIOD 1 /* ms delay between samples */
#define TSC2007_MEASURE_TEMP0 (0x0 << 4)
#define TSC2007_MEASURE_AUX (0x2 << 4)
......@@ -76,7 +77,7 @@ struct tsc2007 {
u16 model;
u16 x_plate_ohms;
unsigned pendown;
bool pendown;
int irq;
int (*get_pendown_state)(void);
......@@ -131,18 +132,18 @@ static void tsc2007_send_event(void *tsc)
} else
rt = 0;
/* Sample found inconsistent by debouncing or pressure is beyond
/*
* Sample found inconsistent by debouncing or pressure is beyond
* the maximum. Don't report it to user space, repeat at least
* once more the measurement
*/
if (rt > MAX_12BIT) {
dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
schedule_delayed_work(&ts->work, TS_POLL_PERIOD);
return;
}
/* NOTE: We can't rely on the pressure to determine the pen down
/*
* NOTE: We can't rely on the pressure to determine the pen down
* state, even this controller has a pressure sensor. The pressure
* value can fluctuate for quite a while after lifting the pen and
* in some cases may not even settle at the expected value.
......@@ -157,7 +158,7 @@ static void tsc2007_send_event(void *tsc)
dev_dbg(&ts->client->dev, "DOWN\n");
input_report_key(input, BTN_TOUCH, 1);
ts->pendown = 1;
ts->pendown = true;
}
input_report_abs(input, ABS_X, x);
......@@ -169,8 +170,6 @@ static void tsc2007_send_event(void *tsc)
dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n",
x, y, rt);
}
schedule_delayed_work(&ts->work, TS_POLL_PERIOD);
}
static int tsc2007_read_values(struct tsc2007 *tsc)
......@@ -195,6 +194,7 @@ static void tsc2007_work(struct work_struct *work)
{
struct tsc2007 *ts =
container_of(to_delayed_work(work), struct tsc2007, work);
if (unlikely(!ts->get_pendown_state() && ts->pendown)) {
struct input_dev *input = ts->input;
......@@ -204,7 +204,7 @@ static void tsc2007_work(struct work_struct *work)
input_report_abs(input, ABS_PRESSURE, 0);
input_sync(input);
ts->pendown = 0;
ts->pendown = false;
enable_irq(ts->irq);
} else {
/* pen is still down, continue with the measurement */
......@@ -212,6 +212,9 @@ static void tsc2007_work(struct work_struct *work)
tsc2007_read_values(ts);
tsc2007_send_event(ts);
schedule_delayed_work(&ts->work,
msecs_to_jiffies(TS_POLL_PERIOD));
}
}
......@@ -221,7 +224,8 @@ static irqreturn_t tsc2007_irq(int irq, void *handle)
if (likely(ts->get_pendown_state())) {
disable_irq_nosync(ts->irq);
schedule_delayed_work(&ts->work, 0);
schedule_delayed_work(&ts->work,
msecs_to_jiffies(TS_POLL_DELAY));
}
if (ts->clear_penirq)
......@@ -230,8 +234,21 @@ static irqreturn_t tsc2007_irq(int irq, void *handle)
return IRQ_HANDLED;
}
static int tsc2007_probe(struct i2c_client *client,
const struct i2c_device_id *id)
static void tsc2007_free_irq(struct tsc2007 *ts)
{
free_irq(ts->irq, ts);
if (cancel_delayed_work_sync(&ts->work)) {
/*
* Work was pending, therefore we need to enable
* IRQ here to balance the disable_irq() done in the
* interrupt handler.
*/
enable_irq(ts->irq);
}
}
static int __devinit tsc2007_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tsc2007 *ts;
struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data;
......@@ -255,17 +272,15 @@ static int tsc2007_probe(struct i2c_client *client,
}
ts->client = client;
i2c_set_clientdata(client, ts);
ts->irq = client->irq;
ts->input = input_dev;
INIT_DELAYED_WORK(&ts->work, tsc2007_work);
ts->model = pdata->model;
ts->x_plate_ohms = pdata->x_plate_ohms;
ts->get_pendown_state = pdata->get_pendown_state;
ts->clear_penirq = pdata->clear_penirq;
pdata->init_platform_hw();
snprintf(ts->phys, sizeof(ts->phys),
"%s/input0", dev_name(&client->dev));
......@@ -280,11 +295,7 @@ static int tsc2007_probe(struct i2c_client *client,
input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
tsc2007_read_values(ts);
ts->irq = client->irq;
INIT_DELAYED_WORK(&ts->work, tsc2007_work);
pdata->init_platform_hw();
err = request_irq(ts->irq, tsc2007_irq, 0,
client->dev.driver->name, ts);
......@@ -297,29 +308,30 @@ static int tsc2007_probe(struct i2c_client *client,
if (err)
goto err_free_irq;
dev_info(&client->dev, "registered with irq (%d)\n", ts->irq);
i2c_set_clientdata(client, ts);
tsc2007_read_values(ts);
return 0;
err_free_irq:
free_irq(ts->irq, ts);
tsc2007_free_irq(ts);
pdata->exit_platform_hw();
err_free_mem:
input_free_device(input_dev);
kfree(ts);
return err;
}
static int tsc2007_remove(struct i2c_client *client)
static int __devexit tsc2007_remove(struct i2c_client *client)
{
struct tsc2007 *ts = i2c_get_clientdata(client);
struct tsc2007_platform_data *pdata;
struct tsc2007_platform_data *pdata = client->dev.platform_data;
cancel_delayed_work_sync(&ts->work);
tsc2007_free_irq(ts);
pdata = client->dev.platform_data;
pdata->exit_platform_hw();
free_irq(ts->irq, ts);
input_unregister_device(ts->input);
kfree(ts);
......@@ -340,7 +352,7 @@ static struct i2c_driver tsc2007_driver = {
},
.id_table = tsc2007_idtable,
.probe = tsc2007_probe,
.remove = tsc2007_remove,
.remove = __devexit_p(tsc2007_remove),
};
static int __init tsc2007_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment