Merge branch 'imx-fixes-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

arch/arm/mach-imx/clock-imx25.c

@@ -331,6 +331,9 @@ int __init mx25_clocks_init(void)
 	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
 			CRM_BASE + 0x64);
 
+	/* Clock source for gpt is ahb_div */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -30,6 +30,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <sound/tlv320aic32x4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
 	.invert = 0,
 };
 
+static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
+	.power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
+		     AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
+		     AIC32X4_PWR_AIC32X4_LDO_ENABLE |
+		     AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
+		     AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
+	.micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
+			 AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
+	.swapdacs = false,
+};
+
 static struct i2c_board_info visstrim_m10_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pca9555", 0x20),
@@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic32x4", 0x18),
+		.platform_data = &visstrim_m10_aic32x4_pdata,
 	}
 };
 

arch/arm/mach-imx/mach-mx31ads.c

@@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
 #endif
 };
 
-static void mxc_init_i2c(void)
+static void __init mxc_init_i2c(void)
 {
 	i2c_register_board_info(1, mx31ads_i2c1_devices,
 				ARRAY_SIZE(mx31ads_i2c1_devices));
@@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = {
 	MX31_PIN_STXD5__STXD5,
 };
 
-static void mxc_init_audio(void)
+static void __init mxc_init_audio(void)
 {
 	imx31_add_imx_ssi(0, NULL);
 	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");

arch/arm/mach-imx/mach-mx31lilly.c

@@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 };
 
-static void lilly1131_usb_init(void)
+static void __init lilly1131_usb_init(void)
 {
 	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
 

arch/arm/mach-mx5/board-cpuimx51.c

@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void)
 					ARRAY_SIZE(mx51babbage_pads));
 
 	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(1, NULL);
 	imx51_add_imx_uart(2, &uart_pdata);
 
 	babbage_fec_reset();

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void)
 	gpio_request(EFIKAMX_PCBID2, "pcbid2");
 	gpio_direction_input(EFIKAMX_PCBID2);
 
-	id = gpio_get_value(EFIKAMX_PCBID0);
-	id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
-	id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+	id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
+	id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
+	id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
 
 	switch (id) {
 	case 7:

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = {
 	{
 		.code = KEY_POWER,
 		.gpio = EFIKASB_PWRKEY,
-		.type = EV_PWR,
+		.type = EV_KEY,
 		.desc = "Power Button",
 		.wakeup = 1,
-		.debounce_interval = 10, /* ms */
+		.active_low = 1,
 	},
 	{
 		.code = SW_LID,
 		.gpio = EFIKASB_LID,
 		.type = EV_SW,
 		.desc = "Lid Switch",
+		.active_low = 1,
 	},
 	{
-		/* SW_RFKILLALL vs KEY_RFKILL ? */
-		.code = SW_RFKILL_ALL,
+		.code = KEY_RFKILL,
 		.gpio = EFIKASB_RFKILL,
-		.type = EV_SW,
+		.type = EV_KEY,
 		.desc = "rfkill",
+		.active_low = 1,
 	},
 };
 
@@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void)
 	gpio_request(EFIKASB_PCBID1, "pcb id1");
 	gpio_direction_input(EFIKASB_PCBID1);
 
-	id = gpio_get_value(EFIKASB_PCBID0);
-	id |= gpio_get_value(EFIKASB_PCBID1) << 1;
+	id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
+	id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
 
 	switch (id) {
 	default:

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk)
 	int i = 0;
 
 	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	if (reg & MXC_PLL_DP_CTL_UPEN)
+		return 0;
+
+	reg |= MXC_PLL_DP_CTL_UPEN;
 	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
 
 	/* Wait for lock */

arch/arm/mach-mx5/mx51_efika.c

@@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 
 	mdelay(10);
 
-	return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data usbh1_config = {

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -44,6 +44,14 @@
 #define UART_PADDR	MX51_UART1_BASE_ADDR
 #endif
 
+/* iMX50/53 have same addresses, but not iMX51 */
+#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR	MX53_UART1_BASE_ADDR
+#endif
+
 #define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
 
 		.macro	addruart, rp, rv