ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4

Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/pcm512x.c

@@ -1156,25 +1156,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
 				ret, pcm512x->pll_out);
 			return ret;
 		}
-
-		gpio = PCM512x_G1OE << (4 - 1);
-		ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_EN,
-					 gpio, gpio);
-		if (ret != 0) {
-			dev_err(codec->dev, "Failed to enable gpio %d: %d\n",
-				4, ret);
-			return ret;
-		}
-
-		gpio = PCM512x_GPIO_OUTPUT_1 + 4 - 1;
-		ret = regmap_update_bits(pcm512x->regmap, gpio,
-					 PCM512x_GxSL, PCM512x_GxSL_PLLLK);
-		if (ret != 0) {
-			dev_err(codec->dev,
-				"Failed to output pll lock on %d: %d\n",
-				ret, 4);
-			return ret;
-		}
 	}
 
 	ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE,