qmi_wwan: Add support for Quectel EG12/EM12

[ Upstream commit 822e44b4 ]

Quectel EG12 (module)/EM12 (M.2 card) is a Cat. 12 LTE modem. The modem
behaves in the same way as the EP06, so the "set DTR"-quirk must be
applied and the diagnostic-interface check performed. Since the
diagnostic-check now applies to more modems, I have renamed the function
from quectel_ep06_diag_detected() to quectel_diag_detected().
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/usb/qmi_wwan.c

@@ -976,6 +976,13 @@ static const struct usb_device_id products[] = {
 					      0xff),
 		.driver_info	    = (unsigned long)&qmi_wwan_info_quirk_dtr,
 	},
+	{	/* Quectel EG12/EM12 */
+		USB_DEVICE_AND_INTERFACE_INFO(0x2c7c, 0x0512,
+					      USB_CLASS_VENDOR_SPEC,
+					      USB_SUBCLASS_VENDOR_SPEC,
+					      0xff),
+		.driver_info	    = (unsigned long)&qmi_wwan_info_quirk_dtr,
+	},
 
 	/* 3. Combined interface devices matching on interface number */
 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
@@ -1343,17 +1350,20 @@ static bool quectel_ec20_detected(struct usb_interface *intf)
 	return false;
 }
 
-static bool quectel_ep06_diag_detected(struct usb_interface *intf)
+static bool quectel_diag_detected(struct usb_interface *intf)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct usb_interface_descriptor intf_desc = intf->cur_altsetting->desc;
+	u16 id_vendor = le16_to_cpu(dev->descriptor.idVendor);
+	u16 id_product = le16_to_cpu(dev->descriptor.idProduct);
 
-	if (le16_to_cpu(dev->descriptor.idVendor) == 0x2c7c &&
-	    le16_to_cpu(dev->descriptor.idProduct) == 0x0306 &&
-	    intf_desc.bNumEndpoints == 2)
-		return true;
+	if (id_vendor != 0x2c7c || intf_desc.bNumEndpoints != 2)
+		return false;
 
-	return false;
+	if (id_product == 0x0306 || id_product == 0x0512)
+		return true;
+	else
+		return false;
 }
 
 static int qmi_wwan_probe(struct usb_interface *intf,
@@ -1390,13 +1400,13 @@ static int qmi_wwan_probe(struct usb_interface *intf,
 		return -ENODEV;
 	}
 
-	/* Quectel EP06/EM06/EG06 supports dynamic interface configuration, so
+	/* Several Quectel modems supports dynamic interface configuration, so
 	 * we need to match on class/subclass/protocol. These values are
 	 * identical for the diagnostic- and QMI-interface, but bNumEndpoints is
 	 * different. Ignore the current interface if the number of endpoints
 	 * the number for the diag interface (two).
 	 */
-	if (quectel_ep06_diag_detected(intf))
+	if (quectel_diag_detected(intf))
 		return -ENODEV;
 
 	return usbnet_probe(intf, id);