Commit 16badc34 authored by Avinash Dayanand's avatar Avinash Dayanand Committed by Jeff Kirsher

i40e: Fix for supported link modes in 10GBaseT PHY's

100baseT/Full is now listed and supported link mode for 10GBaseT PHY.
This is a fix to list all the supported link modes of 10GBaseT PHY.

Change-ID: If2be3212ef0fef85fd5d6e4550c7783de2f915e9
Signed-off-by: default avatarAvinash Dayanand <avinash.dayanand@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 539a379c
......@@ -313,6 +313,13 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
ecmd->advertising |= ADVERTISED_10000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
/* adding 100baseT support for 10GBASET_PHY */
if (pf->flags & I40E_FLAG_HAVE_10GBASET_PHY) {
ecmd->supported |= SUPPORTED_100baseT_Full;
ecmd->advertising |= ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Full |
ADVERTISED_10000baseT_Full;
}
break;
case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
ecmd->supported = SUPPORTED_Autoneg |
......@@ -325,6 +332,15 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
SUPPORTED_100baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
ecmd->advertising |= ADVERTISED_100baseT_Full;
/* firmware detects 10G phy as 100M phy at 100M speed */
if (pf->flags & I40E_FLAG_HAVE_10GBASET_PHY) {
ecmd->supported |= SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full;
ecmd->advertising |= ADVERTISED_Autoneg |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Full |
ADVERTISED_10000baseT_Full;
}
break;
case I40E_PHY_TYPE_10GBASE_CR1_CU:
case I40E_PHY_TYPE_10GBASE_CR1:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment