Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  intel_mid_battery: Fix battery scaling
  intel_mid_battery: Fix the argument order to intel_scu_ipc_command
  olpc_battery: Fix build failure caused by sysfs changes
  Add s3c-adc-battery driver
  Intel MID platform battery driver

Fix up trivial conflicts (battery drivers added from different branches)
in drivers/power/{Kconfig,Makefile}

drivers/power/Kconfig

@@ -136,6 +136,12 @@ config BATTERY_Z2
 	help
 	  Say Y to include support for the battery on the Zipit Z2.
 
+config BATTERY_S3C_ADC
+	tristate "Battery driver for Samsung ADC based monitoring"
+	depends on S3C_ADC
+	help
+	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
 config CHARGER_PCF50633
 	tristate "NXP PCF50633 MBC"
 	depends on MFD_PCF50633
@@ -153,4 +159,11 @@ config BATTERY_JZ4740
 	  This driver can be build as a module. If so, the module will be
 	  called jz4740-battery.
 
+config BATTERY_INTEL_MID
+	tristate "Battery driver for Intel MID platforms"
+	depends on INTEL_SCU_IPC && SPI
+	help
+	  Say Y here to enable the battery driver on Intel MID
+	  platforms.
+
 endif # POWER_SUPPLY

drivers/power/Makefile

@@ -33,5 +33,7 @@ obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
+obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
+obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o

drivers/power/olpc_battery.c

 /*
  * Battery driver for One Laptop Per Child board.
  *
- *	Copyright © 2006  David Woodhouse <dwmw2@infradead.org>
+ *	Copyright © 2006-2010  David Woodhouse <dwmw2@infradead.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

include/linux/s3c_adc_battery.h

+#ifndef _S3C_ADC_BATTERY_H
+#define _S3C_ADC_BATTERY_H
+
+struct s3c_adc_bat_thresh {
+	int volt; /* mV */
+	int cur; /* mA */
+	int level; /* percent */
+};
+
+struct s3c_adc_bat_pdata {
+	int (*init)(void);
+	void (*exit)(void);
+	void (*enable_charger)(void);
+	void (*disable_charger)(void);
+
+	int gpio_charge_finished;
+
+	const struct s3c_adc_bat_thresh *lut_noac;
+	unsigned int lut_noac_cnt;
+	const struct s3c_adc_bat_thresh *lut_acin;
+	unsigned int lut_acin_cnt;
+
+	const unsigned int volt_channel;
+	const unsigned int current_channel;
+	const unsigned int backup_volt_channel;
+
+	const unsigned int volt_mult;
+	const unsigned int current_mult;
+	const unsigned int backup_volt_mult;
+	const unsigned int internal_impedance;
+
+	const unsigned int backup_volt_max;
+	const unsigned int backup_volt_min;
+};
+
+#endif