staging: comedi: usbdux: move usbdux_firmware_upload()

For aesthetics, move this function closer to the (*auto_attach).

Also, rename some of the defined constants that are used by the
firmware upload.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/usbdux.c

@@ -91,17 +91,16 @@ sampling rate. If you sample two channels you get 4kHz and so on.
 
 #include "comedi_fc.h"
 
-/* timeout for the USB-transfer in ms*/
-#define BULK_TIMEOUT 1000
+/* constants for firmware upload and download */
+#define USBDUX_FIRMWARE		"usbdux_firmware.bin"
+#define USBDUX_FIRMWARE_MAX_LEN	0x2000
+#define USBDUX_FIRMWARE_CMD	0xa0
+#define VENDOR_DIR_IN		0xc0
+#define VENDOR_DIR_OUT		0x40
+#define USBDUX_CPU_CS		0xe600
 
-/* constants for "firmware" upload and download */
-#define FIRMWARE "usbdux_firmware.bin"
-#define USBDUXSUB_FIRMWARE 0xA0
-#define VENDOR_DIR_IN  0xC0
-#define VENDOR_DIR_OUT 0x40
-
-/* internal addresses of the 8051 processor */
-#define USBDUXSUB_CPUCS 0xE600
+/* timeout for the USB-transfer in ms */
+#define BULK_TIMEOUT		1000
 
 /* 300Hz max frequ under PWM */
 #define MIN_PWM_PERIOD  ((long)(1E9/300))
@@ -539,80 +538,6 @@ static void usbduxsub_ao_isoc_irq(struct urb *urb)
 	}
 }
 
-#define FIRMWARE_MAX_LEN 0x2000
-
-static int usbdux_firmware_upload(struct comedi_device *dev,
-				  const u8 *data, size_t size,
-				  unsigned long context)
-{
-	struct usb_device *usb = comedi_to_usb_dev(dev);
-	uint8_t *buf;
-	uint8_t *tmp;
-	int ret;
-
-	if (!data)
-		return 0;
-
-	if (size > FIRMWARE_MAX_LEN) {
-		dev_err(dev->class_dev,
-			"usbdux firmware binary it too large for FX2.\n");
-		return -ENOMEM;
-	}
-
-	/* we generate a local buffer for the firmware */
-	buf = kmemdup(data, size, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	/* we need a malloc'ed buffer for usb_control_msg() */
-	tmp = kmalloc(1, GFP_KERNEL);
-	if (!tmp) {
-		kfree(buf);
-		return -ENOMEM;
-	}
-
-	/* stop the current firmware on the device */
-	*tmp = 1;	/* 7f92 to one */
-	ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0),
-			      USBDUXSUB_FIRMWARE,
-			      VENDOR_DIR_OUT,
-			      USBDUXSUB_CPUCS, 0x0000,
-			      tmp, 1,
-			      BULK_TIMEOUT);
-	if (ret < 0) {
-		dev_err(dev->class_dev, "can not stop firmware\n");
-		goto done;
-	}
-
-	/* upload the new firmware to the device */
-	ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0),
-			      USBDUXSUB_FIRMWARE,
-			      VENDOR_DIR_OUT,
-			      0, 0x0000,
-			      buf, size,
-			      BULK_TIMEOUT);
-	if (ret < 0) {
-		dev_err(dev->class_dev, "firmware upload failed\n");
-		goto done;
-	}
-
-	/* start the new firmware on the device */
-	*tmp = 0;	/* 7f92 to zero */
-	ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0),
-			      USBDUXSUB_FIRMWARE,
-			      VENDOR_DIR_OUT,
-			      USBDUXSUB_CPUCS, 0x0000,
-			      tmp, 1,
-			      BULK_TIMEOUT);
-	if (ret < 0)
-		dev_err(dev->class_dev, "can not start firmware\n");
-
-done:
-	kfree(tmp);
-	kfree(buf);
-	return ret;
-}
-
 static int usbduxsub_submit_inurbs(struct comedi_device *dev)
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
@@ -1635,8 +1560,77 @@ static int usbdux_pwm_config(struct comedi_device *dev,
 	return -EINVAL;
 }
 
-/* end of PWM */
-/*****************************************************************/
+static int usbdux_firmware_upload(struct comedi_device *dev,
+				  const u8 *data, size_t size,
+				  unsigned long context)
+{
+	struct usb_device *usb = comedi_to_usb_dev(dev);
+	uint8_t *buf;
+	uint8_t *tmp;
+	int ret;
+
+	if (!data)
+		return 0;
+
+	if (size > USBDUX_FIRMWARE_MAX_LEN) {
+		dev_err(dev->class_dev,
+			"usbdux firmware binary it too large for FX2.\n");
+		return -ENOMEM;
+	}
+
+	/* we generate a local buffer for the firmware */
+	buf = kmemdup(data, size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* we need a malloc'ed buffer for usb_control_msg() */
+	tmp = kmalloc(1, GFP_KERNEL);
+	if (!tmp) {
+		kfree(buf);
+		return -ENOMEM;
+	}
+
+	/* stop the current firmware on the device */
+	*tmp = 1;	/* 7f92 to one */
+	ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0),
+			      USBDUX_FIRMWARE_CMD,
+			      VENDOR_DIR_OUT,
+			      USBDUX_CPU_CS, 0x0000,
+			      tmp, 1,
+			      BULK_TIMEOUT);
+	if (ret < 0) {
+		dev_err(dev->class_dev, "can not stop firmware\n");
+		goto done;
+	}
+
+	/* upload the new firmware to the device */
+	ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0),
+			      USBDUX_FIRMWARE_CMD,
+			      VENDOR_DIR_OUT,
+			      0, 0x0000,
+			      buf, size,
+			      BULK_TIMEOUT);
+	if (ret < 0) {
+		dev_err(dev->class_dev, "firmware upload failed\n");
+		goto done;
+	}
+
+	/* start the new firmware on the device */
+	*tmp = 0;	/* 7f92 to zero */
+	ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0),
+			      USBDUX_FIRMWARE_CMD,
+			      VENDOR_DIR_OUT,
+			      USBDUX_CPU_CS, 0x0000,
+			      tmp, 1,
+			      BULK_TIMEOUT);
+	if (ret < 0)
+		dev_err(dev->class_dev, "can not start firmware\n");
+
+done:
+	kfree(tmp);
+	kfree(buf);
+	return ret;
+}
 
 static int usbdux_alloc_usb_buffers(struct comedi_device *dev)
 {
@@ -1831,7 +1825,7 @@ static int usbdux_auto_attach(struct comedi_device *dev,
 		return ret;
 	}
 
-	ret = comedi_load_firmware(dev, &usb->dev, FIRMWARE,
+	ret = comedi_load_firmware(dev, &usb->dev, USBDUX_FIRMWARE,
 				   usbdux_firmware_upload, 0);
 	if (ret < 0)
 		return ret;
@@ -1958,4 +1952,4 @@ module_comedi_usb_driver(usbdux_driver, usbdux_usb_driver);
 MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com");
 MODULE_DESCRIPTION("Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com");
 MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(FIRMWARE);
+MODULE_FIRMWARE(USBDUX_FIRMWARE);