Commit 17354bfe authored by Felipe Balbi's avatar Felipe Balbi Committed by Richard Purdie

leds: Add gpio-led trigger

The gpio led trigger will allow leds to be triggered by
gpio events.

When we give the led a gpio number, the trigger will
request_irq() on that so we don't have to keep polling
for gpio state.

It's useful for usecases as n810's keypad leds that could
be triggered by the gpio event generated when user slides
up to show the keypad.

We also provide means for userland to tell us what is the
desired brightness for that special led when it goes on
so userland could use information from ambient light sensors
and not set led brightness too high if it's not necessary.
Signed-off-by: default avatarFelipe Balbi <me@felipebalbi.com>
Signed-off-by: default avatarRichard Purdie <rpurdie@linux.intel.com>
parent ac67e23b
...@@ -255,6 +255,19 @@ config LEDS_TRIGGER_BACKLIGHT ...@@ -255,6 +255,19 @@ config LEDS_TRIGGER_BACKLIGHT
If unsure, say N. If unsure, say N.
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
when using gpios as switches and triggering the needed LEDs
from there. One use case is n810's keypad LEDs that could
be triggered by this trigger when user slides up to show
keypad.
If unsure, say N.
config LEDS_TRIGGER_DEFAULT_ON config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger" tristate "LED Default ON Trigger"
depends on LEDS_TRIGGERS depends on LEDS_TRIGGERS
......
...@@ -35,4 +35,5 @@ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o ...@@ -35,4 +35,5 @@ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
/*
* ledtrig-gio.c - LED Trigger Based on GPIO events
*
* Copyright 2009 Felipe Balbi <me@felipebalbi.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/leds.h>
#include "leds.h"
struct gpio_trig_data {
struct led_classdev *led;
struct work_struct work;
unsigned desired_brightness; /* desired brightness when led is on */
unsigned inverted; /* true when gpio is inverted */
unsigned gpio; /* gpio that triggers the leds */
};
static irqreturn_t gpio_trig_irq(int irq, void *_led)
{
struct led_classdev *led = _led;
struct gpio_trig_data *gpio_data = led->trigger_data;
/* just schedule_work since gpio_get_value can sleep */
schedule_work(&gpio_data->work);
return IRQ_HANDLED;
};
static void gpio_trig_work(struct work_struct *work)
{
struct gpio_trig_data *gpio_data = container_of(work,
struct gpio_trig_data, work);
int tmp;
if (!gpio_data->gpio)
return;
tmp = gpio_get_value(gpio_data->gpio);
if (gpio_data->inverted)
tmp = !tmp;
if (tmp) {
if (gpio_data->desired_brightness)
led_set_brightness(gpio_data->led,
gpio_data->desired_brightness);
else
led_set_brightness(gpio_data->led, LED_FULL);
} else {
led_set_brightness(gpio_data->led, LED_OFF);
}
}
static ssize_t gpio_trig_brightness_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led = dev_get_drvdata(dev);
struct gpio_trig_data *gpio_data = led->trigger_data;
return sprintf(buf, "%u\n", gpio_data->desired_brightness);
}
static ssize_t gpio_trig_brightness_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t n)
{
struct led_classdev *led = dev_get_drvdata(dev);
struct gpio_trig_data *gpio_data = led->trigger_data;
unsigned desired_brightness;
int ret;
ret = sscanf(buf, "%u", &desired_brightness);
if (ret < 1 || desired_brightness > 255) {
dev_err(dev, "invalid value\n");
return -EINVAL;
}
gpio_data->desired_brightness = desired_brightness;
return n;
}
static DEVICE_ATTR(desired_brightness, 0644, gpio_trig_brightness_show,
gpio_trig_brightness_store);
static ssize_t gpio_trig_inverted_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led = dev_get_drvdata(dev);
struct gpio_trig_data *gpio_data = led->trigger_data;
return sprintf(buf, "%s\n", gpio_data->inverted ? "yes" : "no");
}
static ssize_t gpio_trig_inverted_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t n)
{
struct led_classdev *led = dev_get_drvdata(dev);
struct gpio_trig_data *gpio_data = led->trigger_data;
unsigned inverted;
int ret;
ret = sscanf(buf, "%u", &inverted);
if (ret < 1) {
dev_err(dev, "invalid value\n");
return -EINVAL;
}
gpio_data->inverted = !!inverted;
return n;
}
static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
gpio_trig_inverted_store);
static ssize_t gpio_trig_gpio_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led = dev_get_drvdata(dev);
struct gpio_trig_data *gpio_data = led->trigger_data;
return sprintf(buf, "%u\n", gpio_data->gpio);
}
static ssize_t gpio_trig_gpio_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t n)
{
struct led_classdev *led = dev_get_drvdata(dev);
struct gpio_trig_data *gpio_data = led->trigger_data;
unsigned gpio;
int ret;
ret = sscanf(buf, "%u", &gpio);
if (ret < 1) {
dev_err(dev, "couldn't read gpio number\n");
flush_work(&gpio_data->work);
return -EINVAL;
}
if (!gpio) {
free_irq(gpio_to_irq(gpio_data->gpio), led);
return n;
}
if (gpio_data->gpio > 0 && gpio_data->gpio != gpio)
free_irq(gpio_to_irq(gpio_data->gpio), led);
gpio_data->gpio = gpio;
ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq,
IRQF_SHARED | IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
if (ret)
dev_err(dev, "request_irq failed with error %d\n", ret);
return ret ? ret : n;
}
static DEVICE_ATTR(gpio, 0644, gpio_trig_gpio_show, gpio_trig_gpio_store);
static void gpio_trig_activate(struct led_classdev *led)
{
struct gpio_trig_data *gpio_data;
int ret;
gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
if (!gpio_data)
return;
ret = device_create_file(led->dev, &dev_attr_gpio);
if (ret)
goto err_gpio;
ret = device_create_file(led->dev, &dev_attr_inverted);
if (ret)
goto err_inverted;
ret = device_create_file(led->dev, &dev_attr_desired_brightness);
if (ret)
goto err_brightness;
gpio_data->led = led;
led->trigger_data = gpio_data;
INIT_WORK(&gpio_data->work, gpio_trig_work);
return;
err_brightness:
device_remove_file(led->dev, &dev_attr_inverted);
err_inverted:
device_remove_file(led->dev, &dev_attr_gpio);
err_gpio:
kfree(gpio_data);
}
static void gpio_trig_deactivate(struct led_classdev *led)
{
struct gpio_trig_data *gpio_data = led->trigger_data;
if (gpio_data) {
device_remove_file(led->dev, &dev_attr_gpio);
device_remove_file(led->dev, &dev_attr_inverted);
device_remove_file(led->dev, &dev_attr_desired_brightness);
flush_work(&gpio_data->work);
free_irq(gpio_to_irq(gpio_data->gpio),led);
kfree(gpio_data);
}
}
static struct led_trigger gpio_led_trigger = {
.name = "gpio",
.activate = gpio_trig_activate,
.deactivate = gpio_trig_deactivate,
};
static int __init gpio_trig_init(void)
{
return led_trigger_register(&gpio_led_trigger);
}
module_init(gpio_trig_init);
static void __exit gpio_trig_exit(void)
{
led_trigger_unregister(&gpio_led_trigger);
}
module_exit(gpio_trig_exit);
MODULE_AUTHOR("Felipe Balbi <me@felipebalbi.com>");
MODULE_DESCRIPTION("GPIO LED trigger");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment