Skip to content

L
linux
Commit 17eed249 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'upstream-net26' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

parents 4ad96d39 318a94d6
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1678 additions and 1245 deletions
drivers/net/3c509.c
View file @ 17eed249
This diff is collapsed.
drivers/net/arcnet/arcnet.c
View file @ 17eed249
......@@ -940,7 +940,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
/* is the RECON info empty or old? */
if (!lp->first_recon || !lp->last_recon ||
jiffies - lp->last_recon > HZ * 10) {
time_after(jiffies, lp->last_recon + HZ * 10)) {
if (lp->network_down)
BUGMSG(D_NORMAL, "reconfiguration detected: cabling restored?\n");
lp->first_recon = lp->last_recon = jiffies;
......@@ -974,7 +974,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
lp->num_recons = 1;
}
}
} else if (lp->network_down && jiffies - lp->last_recon > HZ * 10) {
} else if (lp->network_down &&
time_after(jiffies, lp->last_recon + HZ * 10)) {
if (lp->network_down)
BUGMSG(D_NORMAL, "cabling restored?\n");
lp->first_recon = lp->last_recon = 0;
......
drivers/net/e1000e/82571.c
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/Makefile
View file @ 17eed249
################################################################################
#
# Intel PRO/1000 Linux driver
# Copyright(c) 1999 - 2007 Intel Corporation.
# Copyright(c) 1999 - 2008 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
......
drivers/net/e1000e/defines.h
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/e1000.h
View file @ 17eed249
/*******************************************************************************
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2007 Intel Corporation.
Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
......@@ -61,7 +61,7 @@ struct e1000_info;
ndev_printk(KERN_NOTICE , netdev, format, ## arg)
/* TX/RX descriptor defines */
/* Tx/Rx descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 4096
#define E1000_MIN_TXD 80
......@@ -114,13 +114,13 @@ struct e1000_buffer {
dma_addr_t dma;
struct sk_buff *skb;
union {
/* TX */
/* Tx */
struct {
unsigned long time_stamp;
u16 length;
u16 next_to_watch;
};
/* RX */
/* Rx */
/* arrays of page information for packet split */
struct e1000_ps_page *ps_pages;
};
......@@ -177,7 +177,7 @@ struct e1000_adapter {
u16 rx_itr;
/*
* TX
* Tx
*/
struct e1000_ring *tx_ring /* One per active queue */
____cacheline_aligned_in_smp;
......@@ -199,7 +199,7 @@ struct e1000_adapter {
unsigned int total_rx_bytes;
unsigned int total_rx_packets;
/* TX stats */
/* Tx stats */
u64 tpt_old;
u64 colc_old;
u64 gotcl_old;
......@@ -211,7 +211,7 @@ struct e1000_adapter {
u32 tx_dma_failed;
/*
* RX
* Rx
*/
bool (*clean_rx) (struct e1000_adapter *adapter,
int *work_done, int work_to_do)
......@@ -223,7 +223,7 @@ struct e1000_adapter {
u32 rx_int_delay;
u32 rx_abs_int_delay;
/* RX stats */
/* Rx stats */
u64 hw_csum_err;
u64 hw_csum_good;
u64 rx_hdr_split;
......@@ -234,6 +234,8 @@ struct e1000_adapter {
unsigned int rx_ps_pages;
u16 rx_ps_bsize0;
u32 max_frame_size;
u32 min_frame_size;
/* OS defined structs */
struct net_device *netdev;
......@@ -258,7 +260,7 @@ struct e1000_adapter {
u32 wol;
u32 pba;
u8 fc_autoneg;
bool fc_autoneg;
unsigned long led_status;
......@@ -305,6 +307,7 @@ struct e1000_info {
#define FLAG_MSI_ENABLED (1 << 27)
#define FLAG_RX_CSUM_ENABLED (1 << 28)
#define FLAG_TSO_FORCE (1 << 29)
#define FLAG_RX_RESTART_NOW (1 << 30)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
......@@ -387,9 +390,11 @@ extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
extern s32 e1000e_setup_link(struct e1000_hw *hw);
extern void e1000e_clear_vfta(struct e1000_hw *hw);
extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
extern void e1000e_mc_addr_list_update_generic(struct e1000_hw *hw,
u8 *mc_addr_list, u32 mc_addr_count,
u32 rar_used_count, u32 rar_count);
extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
u8 *mc_addr_list,
u32 mc_addr_count,
u32 rar_used_count,
u32 rar_count);
extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
......
drivers/net/e1000e/es2lan.c
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/ethtool.c
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/hw.h
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/ich8lan.c
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/lib.c
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/netdev.c
View file @ 17eed249
This diff is collapsed.
drivers/net/e1000e/param.c
View file @ 17eed249
/*******************************************************************************
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2007 Intel Corporation.
Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
......@@ -30,7 +30,8 @@
#include "e1000.h"
/* This is the only thing that needs to be changed to adjust the
/*
* This is the only thing that needs to be changed to adjust the
* maximum number of ports that the driver can manage.
*/
......@@ -46,7 +47,8 @@ module_param(copybreak, uint, 0644);
MODULE_PARM_DESC(copybreak,
"Maximum size of packet that is copied to a new buffer on receive");
/* All parameters are treated the same, as an integer array of values.
/*
* All parameters are treated the same, as an integer array of values.
* This macro just reduces the need to repeat the same declaration code
* over and over (plus this helps to avoid typo bugs).
*/
......@@ -60,8 +62,9 @@ MODULE_PARM_DESC(copybreak,
MODULE_PARM_DESC(X, desc);
/* Transmit Interrupt Delay in units of 1.024 microseconds
* Tx interrupt delay needs to typically be set to something non zero
/*
* Transmit Interrupt Delay in units of 1.024 microseconds
* Tx interrupt delay needs to typically be set to something non zero
*
* Valid Range: 0-65535
*/
......@@ -70,7 +73,8 @@ E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
#define MAX_TXDELAY 0xFFFF
#define MIN_TXDELAY 0
/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
/*
* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
*
* Valid Range: 0-65535
*/
......@@ -79,8 +83,9 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
#define MAX_TXABSDELAY 0xFFFF
#define MIN_TXABSDELAY 0
/* Receive Interrupt Delay in units of 1.024 microseconds
* hardware will likely hang if you set this to anything but zero.
/*
* Receive Interrupt Delay in units of 1.024 microseconds
* hardware will likely hang if you set this to anything but zero.
*
* Valid Range: 0-65535
*/
......@@ -89,7 +94,8 @@ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
#define MAX_RXDELAY 0xFFFF
#define MIN_RXDELAY 0
/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
/*
* Receive Absolute Interrupt Delay in units of 1.024 microseconds
*
* Valid Range: 0-65535
*/
......@@ -98,7 +104,8 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
#define MAX_RXABSDELAY 0xFFFF
#define MIN_RXABSDELAY 0
/* Interrupt Throttle Rate (interrupts/sec)
/*
* Interrupt Throttle Rate (interrupts/sec)
*
* Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
*/
......@@ -107,7 +114,8 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define MAX_ITR 100000
#define MIN_ITR 100
/* Enable Smart Power Down of the PHY
/*
* Enable Smart Power Down of the PHY
*
* Valid Range: 0, 1
*
......@@ -115,7 +123,8 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
*/
E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
/* Enable Kumeran Lock Loss workaround
/*
* Enable Kumeran Lock Loss workaround
*
* Valid Range: 0, 1
*
......
drivers/net/e1000e/phy.c
View file @ 17eed249
This diff is collapsed.
drivers/net/ehea/ehea.h
View file @ 17eed249
......@@ -421,7 +421,7 @@ struct ehea_fw_handle_entry {
struct ehea_fw_handle_array {
struct ehea_fw_handle_entry *arr;
int num_entries;
struct semaphore lock;
struct mutex lock;
};
struct ehea_bcmc_reg_entry {
......@@ -434,7 +434,7 @@ struct ehea_bcmc_reg_entry {
struct ehea_bcmc_reg_array {
struct ehea_bcmc_reg_entry *arr;
int num_entries;
struct semaphore lock;
struct mutex lock;
};
#define EHEA_PORT_UP 1
......@@ -452,7 +452,7 @@ struct ehea_port {
struct vlan_group *vgrp;
struct ehea_eq *qp_eq;
struct work_struct reset_task;
struct semaphore port_lock;
struct mutex port_lock;
char int_aff_name[EHEA_IRQ_NAME_SIZE];
int allmulti; /* Indicates IFF_ALLMULTI state */
int promisc; /* Indicates IFF_PROMISC state */
......
drivers/net/ehea/ehea_main.c
View file @ 17eed249
......@@ -36,6 +36,7 @@
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <asm/kexec.h>
#include <linux/mutex.h>
#include <net/ip.h>
......@@ -99,7 +100,7 @@ static int port_name_cnt;
static LIST_HEAD(adapter_list);
u64 ehea_driver_flags;
struct work_struct ehea_rereg_mr_task;
struct semaphore dlpar_mem_lock;
static DEFINE_MUTEX(dlpar_mem_lock);
struct ehea_fw_handle_array ehea_fw_handles;
struct ehea_bcmc_reg_array ehea_bcmc_regs;
......@@ -1758,7 +1759,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
down(&ehea_bcmc_regs.lock);
mutex_lock(&ehea_bcmc_regs.lock);
/* Deregister old MAC in pHYP */
ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
......@@ -1776,7 +1777,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
out_upregs:
ehea_update_bcmc_registrations();
up(&ehea_bcmc_regs.lock);
mutex_unlock(&ehea_bcmc_regs.lock);
out_free:
kfree(cb0);
out:
......@@ -1938,7 +1939,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
ehea_promiscuous(dev, 0);
down(&ehea_bcmc_regs.lock);
mutex_lock(&ehea_bcmc_regs.lock);
if (dev->flags & IFF_ALLMULTI) {
ehea_allmulti(dev, 1);
......@@ -1969,7 +1970,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
out:
ehea_update_bcmc_registrations();
up(&ehea_bcmc_regs.lock);
mutex_unlock(&ehea_bcmc_regs.lock);
return;
}
......@@ -2452,7 +2453,7 @@ static int ehea_up(struct net_device *dev)
if (port->state == EHEA_PORT_UP)
return 0;
down(&ehea_fw_handles.lock);
mutex_lock(&ehea_fw_handles.lock);
ret = ehea_port_res_setup(port, port->num_def_qps,
port->num_add_tx_qps);
......@@ -2490,7 +2491,7 @@ static int ehea_up(struct net_device *dev)
}
}
down(&ehea_bcmc_regs.lock);
mutex_lock(&ehea_bcmc_regs.lock);
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret) {
......@@ -2513,10 +2514,10 @@ static int ehea_up(struct net_device *dev)
ehea_info("Failed starting %s. ret=%i", dev->name, ret);
ehea_update_bcmc_registrations();
up(&ehea_bcmc_regs.lock);
mutex_unlock(&ehea_bcmc_regs.lock);
ehea_update_firmware_handles();
up(&ehea_fw_handles.lock);
mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
......@@ -2542,7 +2543,7 @@ static int ehea_open(struct net_device *dev)
int ret;
struct ehea_port *port = netdev_priv(dev);
down(&port->port_lock);
mutex_lock(&port->port_lock);
if (netif_msg_ifup(port))
ehea_info("enabling port %s", dev->name);
......@@ -2553,7 +2554,7 @@ static int ehea_open(struct net_device *dev)
netif_start_queue(dev);
}
up(&port->port_lock);
mutex_unlock(&port->port_lock);
return ret;
}
......@@ -2566,18 +2567,18 @@ static int ehea_down(struct net_device *dev)
if (port->state == EHEA_PORT_DOWN)
return 0;
down(&ehea_bcmc_regs.lock);
mutex_lock(&ehea_fw_handles.lock);
mutex_lock(&ehea_bcmc_regs.lock);
ehea_drop_multicast_list(dev);
ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
ehea_free_interrupts(dev);
down(&ehea_fw_handles.lock);
port->state = EHEA_PORT_DOWN;
ehea_update_bcmc_registrations();
up(&ehea_bcmc_regs.lock);
mutex_unlock(&ehea_bcmc_regs.lock);
ret = ehea_clean_all_portres(port);
if (ret)
......@@ -2585,7 +2586,7 @@ static int ehea_down(struct net_device *dev)
dev->name, ret);
ehea_update_firmware_handles();
up(&ehea_fw_handles.lock);
mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
......@@ -2599,11 +2600,11 @@ static int ehea_stop(struct net_device *dev)
ehea_info("disabling port %s", dev->name);
flush_scheduled_work();
down(&port->port_lock);
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
ret = ehea_down(dev);
up(&port->port_lock);
mutex_unlock(&port->port_lock);
return ret;
}
......@@ -2801,7 +2802,7 @@ static void ehea_reset_port(struct work_struct *work)
struct net_device *dev = port->netdev;
port->resets++;
down(&port->port_lock);
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
......@@ -2821,7 +2822,7 @@ static void ehea_reset_port(struct work_struct *work)
netif_wake_queue(dev);
out:
up(&port->port_lock);
mutex_unlock(&port->port_lock);
return;
}
......@@ -2830,7 +2831,7 @@ static void ehea_rereg_mrs(struct work_struct *work)
int ret, i;
struct ehea_adapter *adapter;
down(&dlpar_mem_lock);
mutex_lock(&dlpar_mem_lock);
ehea_info("LPAR memory enlarged - re-initializing driver");
list_for_each_entry(adapter, &adapter_list, list)
......@@ -2838,21 +2839,23 @@ static void ehea_rereg_mrs(struct work_struct *work)
/* Shutdown all ports */
for (i = 0; i < EHEA_MAX_PORTS; i++) {
struct ehea_port *port = adapter->port[i];
struct net_device *dev;
if (port) {
struct net_device *dev = port->netdev;
if (!port)
continue;
if (dev->flags & IFF_UP) {
down(&port->port_lock);
netif_stop_queue(dev);
ret = ehea_stop_qps(dev);
if (ret) {
up(&port->port_lock);
goto out;
}
port_napi_disable(port);
up(&port->port_lock);
dev = port->netdev;
if (dev->flags & IFF_UP) {
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
ret = ehea_stop_qps(dev);
if (ret) {
mutex_unlock(&port->port_lock);
goto out;
}
port_napi_disable(port);
mutex_unlock(&port->port_lock);
}
}
......@@ -2892,17 +2895,17 @@ static void ehea_rereg_mrs(struct work_struct *work)
struct net_device *dev = port->netdev;
if (dev->flags & IFF_UP) {
down(&port->port_lock);
mutex_lock(&port->port_lock);
port_napi_enable(port);
ret = ehea_restart_qps(dev);
if (!ret)
netif_wake_queue(dev);
up(&port->port_lock);
mutex_unlock(&port->port_lock);
}
}
}
}
up(&dlpar_mem_lock);
mutex_unlock(&dlpar_mem_lock);
ehea_info("re-initializing driver complete");
out:
return;
......@@ -3063,7 +3066,7 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
port = netdev_priv(dev);
sema_init(&port->port_lock, 1);
mutex_init(&port->port_lock);
port->state = EHEA_PORT_DOWN;
port->sig_comp_iv = sq_entries / 10;
......@@ -3342,7 +3345,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
ehea_error("Invalid ibmebus device probed");
return -EINVAL;
}
down(&ehea_fw_handles.lock);
mutex_lock(&ehea_fw_handles.lock);
adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
if (!adapter) {
......@@ -3426,7 +3429,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
out:
ehea_update_firmware_handles();
up(&ehea_fw_handles.lock);
mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
......@@ -3445,7 +3448,7 @@ static int __devexit ehea_remove(struct of_device *dev)
flush_scheduled_work();
down(&ehea_fw_handles.lock);
mutex_lock(&ehea_fw_handles.lock);
ibmebus_free_irq(adapter->neq->attr.ist1, adapter);
tasklet_kill(&adapter->neq_tasklet);
......@@ -3456,7 +3459,7 @@ static int __devexit ehea_remove(struct of_device *dev)
kfree(adapter);
ehea_update_firmware_handles();
up(&ehea_fw_handles.lock);
mutex_unlock(&ehea_fw_handles.lock);
return 0;
}
......@@ -3543,9 +3546,8 @@ int __init ehea_module_init(void)
memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles));
memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
sema_init(&dlpar_mem_lock, 1);
sema_init(&ehea_fw_handles.lock, 1);
sema_init(&ehea_bcmc_regs.lock, 1);
mutex_init(&ehea_fw_handles.lock);
mutex_init(&ehea_bcmc_regs.lock);
ret = check_module_parm();
if (ret)
......
drivers/net/ixgbe/ixgbe_main.c
View file @ 17eed249
......@@ -367,7 +367,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
/* Always use CB2 mode, difference is masked
* in the CB driver. */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
if (dca_add_requester(dev) == IXGBE_SUCCESS) {
if (dca_add_requester(dev) == 0) {
ixgbe_setup_dca(adapter);
break;
}
......@@ -381,7 +381,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
break;
}
return IXGBE_SUCCESS;
return 0;
}
#endif /* CONFIG_DCA */
......@@ -3605,7 +3605,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
goto err_register;
#ifdef CONFIG_DCA
if (dca_add_requester(&pdev->dev) == IXGBE_SUCCESS) {
if (dca_add_requester(&pdev->dev) == 0) {
adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
/* always use CB2 mode, difference is masked
* in the CB driver */
......
drivers/net/tokenring/3c359.c
View file @ 17eed249
......@@ -42,6 +42,7 @@
#define XL_DEBUG 0
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
......@@ -408,7 +409,7 @@ static int xl_hw_reset(struct net_device *dev)
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
if(jiffies-t > 40*HZ) {
if (time_after(jiffies, t + 40 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global reset.\n", dev->name);
return -ENODEV;
}
......@@ -519,7 +520,7 @@ static int xl_hw_reset(struct net_device *dev)
t=jiffies;
while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) {
schedule();
if(jiffies-t > 15*HZ) {
if (time_after(jiffies, t + 15 * HZ)) {
printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
return -ENODEV;
}
......@@ -790,7 +791,7 @@ static int xl_open_hw(struct net_device *dev)
t=jiffies;
while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
schedule();
if(jiffies-t > 40*HZ) {
if (time_after(jiffies, t + 40 * HZ)) {
printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
break ;
}
......@@ -1003,7 +1004,7 @@ static void xl_reset(struct net_device *dev)
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
if(jiffies-t > 40*HZ) {
if (time_after(jiffies, t + 40 * HZ)) {
printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
break ;
}
......@@ -1270,7 +1271,7 @@ static int xl_close(struct net_device *dev)
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
if(jiffies-t > 10*HZ) {
if (time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n", dev->name);
break ;
}
......@@ -1279,7 +1280,7 @@ static int xl_close(struct net_device *dev)
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
if(jiffies-t > 10*HZ) {
if (time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n", dev->name);
break ;
}
......@@ -1288,7 +1289,7 @@ static int xl_close(struct net_device *dev)
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
if(jiffies-t > 10*HZ) {
if (time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n", dev->name);
break ;
}
......@@ -1305,7 +1306,7 @@ static int xl_close(struct net_device *dev)
t=jiffies;
while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
schedule();
if(jiffies-t > 10*HZ) {
if (time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n", dev->name);
break ;
}
......@@ -1334,7 +1335,7 @@ static int xl_close(struct net_device *dev)
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
if(jiffies-t > 10*HZ) {
if (time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n", dev->name);
break ;
}
......@@ -1343,7 +1344,7 @@ static int xl_close(struct net_device *dev)
t=jiffies;
while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
schedule();
if(jiffies-t > 10*HZ) {
if (time_after(jiffies, t + 10 * HZ)) {
printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n", dev->name);
break ;
}
......
drivers/net/yellowfin.c
View file @ 17eed249
This diff is collapsed.
include/linux/arcdevice.h
View file @ 17eed249
......@@ -283,8 +283,8 @@ struct arcnet_local {
int next_buf, first_free_buf;
/* network "reconfiguration" handling */
time_t first_recon, /* time of "first" RECON message to count */
last_recon; /* time of most recent RECON */
unsigned long first_recon; /* time of "first" RECON message to count */
unsigned long last_recon; /* time of most recent RECON */
int num_recons; /* number of RECONs between first and last. */
bool network_down; /* do we think the network is down? */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7