Merge tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc fixes from Michael Ellerman:
 - build fix for SMP=n in book3s_xics.c
 - fix for Daniel's pci_controller_ops on powernv.
 - revert the TM syscall abort patch for now.
 - CPU affinity fix from Nathan.
 - two EEH fixes from Gavin.
 - fix for CR corruption from Sam.
 - selftest build fix.

* tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc/powernv: Restore non-volatile CRs after nap
  powerpc/eeh: Delay probing EEH device during hotplug
  powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state()
  powerpc/pseries: Correct cpu affinity for dlpar added cpus
  selftests/powerpc: Fix the pmu install rule
  Revert "powerpc/tm: Abort syscalls in active transactions"
  powerpc/powernv: Fix early pci_controller_ops loading.
  powerpc/kvm: Fix SMP=n build error in book3s_xics.c

Documentation/powerpc/transactional_memory.txt

@@ -74,23 +74,22 @@ Causes of transaction aborts
 Syscalls
 ========
 
-Syscalls made from within an active transaction will not be performed and the
-transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
-| TM_CAUSE_PERSISTENT.
+Performing syscalls from within transaction is not recommended, and can lead
+to unpredictable results.
 
-Syscalls made from within a suspended transaction are performed as normal and
-the transaction is not explicitly doomed by the kernel.  However, what the
-kernel does to perform the syscall may result in the transaction being doomed
-by the hardware.  The syscall is performed in suspended mode so any side
-effects will be persistent, independent of transaction success or failure.  No
-guarantees are provided by the kernel about which syscalls will affect
-transaction success.
+Syscalls do not by design abort transactions, but beware: The kernel code will
+not be running in transactional state.  The effect of syscalls will always
+remain visible, but depending on the call they may abort your transaction as a
+side-effect, read soon-to-be-aborted transactional data that should not remain
+invisible, etc.  If you constantly retry a transaction that constantly aborts
+itself by calling a syscall, you'll have a livelock & make no progress.
 
-Care must be taken when relying on syscalls to abort during active transactions
-if the calls are made via a library.  Libraries may cache values (which may
-give the appearance of success) or perform operations that cause transaction
-failure before entering the kernel (which may produce different failure codes).
-Examples are glibc's getpid() and lazy symbol resolution.
+Simple syscalls (e.g. sigprocmask()) "could" be OK.  Even things like write()
+from, say, printf() should be OK as long as the kernel does not access any
+memory that was accessed transactionally.
+
+Consider any syscalls that happen to work as debug-only -- not recommended for
+production use.  Best to queue them up till after the transaction is over.
 
 
 Signals
@@ -177,7 +176,8 @@ kernel aborted a transaction:
  TM_CAUSE_RESCHED       Thread was rescheduled.
  TM_CAUSE_TLBI          Software TLB invalid.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
- TM_CAUSE_SYSCALL       Syscall from active transaction.
+ TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort
+                        transactions for consistency will use this.
  TM_CAUSE_SIGNAL        Signal delivered.
  TM_CAUSE_MISC          Currently unused.
  TM_CAUSE_ALIGNMENT     Alignment fault.

arch/powerpc/include/uapi/asm/tm.h

@@ -11,7 +11,7 @@
 #define TM_CAUSE_RESCHED	0xde
 #define TM_CAUSE_TLBI		0xdc
 #define TM_CAUSE_FAC_UNAV	0xda
-#define TM_CAUSE_SYSCALL	0xd8
+#define TM_CAUSE_SYSCALL	0xd8  /* future use */
 #define TM_CAUSE_MISC		0xd6  /* future use */
 #define TM_CAUSE_SIGNAL		0xd4
 #define TM_CAUSE_ALIGNMENT	0xd2

arch/powerpc/kernel/eeh.c

@@ -749,21 +749,24 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 		eeh_unfreeze_pe(pe, false);
 		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
+		eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 		break;
 	case pcie_hot_reset:
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
 	default:
-		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+		eeh_pe_state_clear(pe, EEH_PE_ISOLATED | EEH_PE_CFG_BLOCKED);
 		return -EINVAL;
 	};
 
@@ -1058,6 +1061,9 @@ void eeh_add_device_early(struct pci_dn *pdn)
 	if (!edev || !eeh_enabled())
 		return;
 
+	if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
+		return;
+
 	/* USB Bus children of PCI devices will not have BUID's */
 	phb = edev->phb;
 	if (NULL == phb ||
@@ -1112,6 +1118,9 @@ void eeh_add_device_late(struct pci_dev *dev)
 		return;
 	}
 
+	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
+		eeh_ops->probe(pdn, NULL);
+
 	/*
 	 * The EEH cache might not be removed correctly because of
 	 * unbalanced kref to the device during unplug time, which

arch/powerpc/kernel/entry_64.S

@@ -34,7 +34,6 @@
 #include <asm/ftrace.h>
 #include <asm/hw_irq.h>
 #include <asm/context_tracking.h>
-#include <asm/tm.h>
 
 /*
  * System calls.
@@ -146,24 +145,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
 	bne	syscall_dotrace
 .Lsyscall_dotrace_cont:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-BEGIN_FTR_SECTION
-	b	1f
-END_FTR_SECTION_IFCLR(CPU_FTR_TM)
-	extrdi.	r11, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
-	beq+	1f
-
-	/* Doom the transaction and don't perform the syscall: */
-	mfmsr	r11
-	li	r12, 1
-	rldimi	r11, r12, MSR_TM_LG, 63-MSR_TM_LG
-	mtmsrd	r11, 0
-	li	r11, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
-	TABORT(R11)
-
-	b	.Lsyscall_exit
-1:
-#endif
 	cmpldi	0,r0,NR_syscalls
 	bge-	syscall_enosys
 

arch/powerpc/kernel/idle_power7.S

@@ -501,9 +501,11 @@ BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	ld	r1,PACAR1(r13)
+	ld	r6,_CCR(r1)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
 	addi	r1,r1,INT_FRAME_SIZE
+	mtcr	r6
 	mtspr	SPRN_SRR1,r4
 	mtspr	SPRN_SRR0,r5
 	rfid

arch/powerpc/kvm/book3s_xics.c

@@ -12,6 +12,7 @@
 #include <linux/err.h>
 #include <linux/gfp.h>
 #include <linux/anon_inodes.h>
+#include <linux/spinlock.h>
 
 #include <asm/uaccess.h>
 #include <asm/kvm_book3s.h>
@@ -20,7 +21,6 @@
 #include <asm/xics.h>
 #include <asm/debug.h>
 #include <asm/time.h>
-#include <asm/spinlock.h>
 
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -2693,7 +2693,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		hose->last_busno = 0xff;
 	}
 	hose->private_data = phb;
-	hose->controller_ops = pnv_pci_controller_ops;
 	phb->hub_id = hub_id;
 	phb->opal_id = phb_id;
 	phb->type = ioda_type;
@@ -2812,6 +2811,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
 	pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
 	pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus;
+	hose->controller_ops = pnv_pci_controller_ops;
 
 #ifdef CONFIG_PCI_IOV
 	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;

arch/powerpc/platforms/pseries/dlpar.c

@@ -412,6 +412,10 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	if (rc)
 		return -EINVAL;
 
+	rc = dlpar_acquire_drc(drc_index);
+	if (rc)
+		return -EINVAL;
+
 	parent = of_find_node_by_path("/cpus");
 	if (!parent)
 		return -ENODEV;
@@ -422,12 +426,6 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 
 	of_node_put(parent);
 
-	rc = dlpar_acquire_drc(drc_index);
-	if (rc) {
-		dlpar_free_cc_nodes(dn);
-		return -EINVAL;
-	}
-
 	rc = dlpar_attach_node(dn);
 	if (rc) {
 		dlpar_release_drc(drc_index);

tools/testing/selftests/powerpc/pmu/Makefile

@@ -26,7 +26,7 @@ override define EMIT_TESTS
 	$(MAKE) -s -C ebb emit_tests
 endef
 
-DEFAULT_INSTALL := $(INSTALL_RULE)
+DEFAULT_INSTALL_RULE := $(INSTALL_RULE)
 override define INSTALL_RULE
 	$(DEFAULT_INSTALL_RULE)
 	$(MAKE) -C ebb install

tools/testing/selftests/powerpc/tm/Makefile

-TEST_PROGS := tm-resched-dscr tm-syscall
+TEST_PROGS := tm-resched-dscr
 
 all: $(TEST_PROGS)