Commit 199fb21d authored by David Brownell's avatar David Brownell Committed by Richard Purdie

leds: bugfixes for leds-gpio

Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks:

 - Do the INIT_WORK() before registering each LED, so if its trigger
   becomes immediately active it can schedule work without oopsing..

 - Use normal registration, not platform_driver_probe(), so that
   devices appearing "late" (hotplug type) can still be bound.

 - Mark the driver remove code as "__devexit", preventing oopses
   when the underlying device is removed.

These issues came up when using this driver with some GPIO expanders
living on serial busses, which act unlike "normal" platform devices:
they can appear and vanish along with the serial bus driver.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
parent c11eef21
......@@ -60,7 +60,7 @@ static void gpio_led_set(struct led_classdev *led_cdev,
gpio_set_value(led_dat->gpio, level);
}
static int __init gpio_led_probe(struct platform_device *pdev)
static int gpio_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
struct gpio_led *cur_led;
......@@ -93,13 +93,13 @@ static int __init gpio_led_probe(struct platform_device *pdev)
gpio_direction_output(led_dat->gpio, led_dat->active_low);
INIT_WORK(&led_dat->work, gpio_led_work);
ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
if (ret < 0) {
gpio_free(led_dat->gpio);
goto err;
}
INIT_WORK(&led_dat->work, gpio_led_work);
}
platform_set_drvdata(pdev, leds_data);
......@@ -110,17 +110,17 @@ static int __init gpio_led_probe(struct platform_device *pdev)
if (i > 0) {
for (i = i - 1; i >= 0; i--) {
led_classdev_unregister(&leds_data[i].cdev);
cancel_work_sync(&leds_data[i].work);
gpio_free(leds_data[i].gpio);
}
}
flush_scheduled_work();
kfree(leds_data);
return ret;
}
static int __exit gpio_led_remove(struct platform_device *pdev)
static int __devexit gpio_led_remove(struct platform_device *pdev)
{
int i;
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
......@@ -130,9 +130,10 @@ static int __exit gpio_led_remove(struct platform_device *pdev)
for (i = 0; i < pdata->num_leds; i++) {
led_classdev_unregister(&leds_data[i].cdev);
cancel_work_sync(&leds_data[i].work);
gpio_free(leds_data[i].gpio);
}
kfree(leds_data);
return 0;
......@@ -144,7 +145,7 @@ static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
struct gpio_led_data *leds_data;
int i;
leds_data = platform_get_drvdata(pdev);
for (i = 0; i < pdata->num_leds; i++)
......@@ -172,7 +173,8 @@ static int gpio_led_resume(struct platform_device *pdev)
#endif
static struct platform_driver gpio_led_driver = {
.remove = __exit_p(gpio_led_remove),
.probe = gpio_led_probe,
.remove = __devexit_p(gpio_led_remove),
.suspend = gpio_led_suspend,
.resume = gpio_led_resume,
.driver = {
......@@ -183,7 +185,7 @@ static struct platform_driver gpio_led_driver = {
static int __init gpio_led_init(void)
{
return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
return platform_driver_register(&gpio_led_driver);
}
static void __exit gpio_led_exit(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment