Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "A lot of movement in the EDAC tree this time around, coarse summary
  below:

   - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
     buffers (Thor Thayer)

   - split the memory controller part out of mpc85xx and share it with a
     new Freescale ARM Layerscape driver (York Sun)

   - amd64_edac fixes (Yazen Ghannam)

   - misc cleanups, refactoring and fixes all over the place"

* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
  EDAC, altera: Add IRQ Flags to disable IRQ while handling
  EDAC, altera: Correct EDAC IRQ error message
  EDAC, amd64: Autoload module using x86_cpu_id
  EDAC, sb_edac: Remove NULL pointer check on array pci_tad
  EDAC: Remove NO_IRQ from powerpc-only drivers
  EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
  EDAC, fsl_ddr: Add entry to MAINTAINERS
  EDAC: Move Doug Thompson to CREDITS
  EDAC, I3000: Orphan driver
  EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
  EDAC, layerscape: Add Layerscape EDAC support
  EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
  EDAC, fsl_ddr: Add support for little endian
  EDAC, fsl_ddr: Add missing DDR DRAM types
  EDAC, fsl_ddr: Rename macros and names
  EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
  EDAC, mpc85xx: Replace printk() with pr_* format
  EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
  EDAC, altera: Rename MC trigger to common name
  EDAC, altera: Rename device trigger to common name
  ...

CREDITS

@@ -3523,6 +3523,10 @@ S: 145 Howard St.
 S: Northborough, MA 01532
 S: USA
 
+N: Doug Thompson
+E: dougthompson@xmission.com
+D: EDAC
+
 N: Tommy Thorn
 E: Tommy.Thorn@irisa.fr
 W: http://www.irisa.fr/prive/thorn/index.html
@@ -3659,6 +3663,10 @@ S: Obere Heerbergstrasse 17
 S: 97078 Wuerzburg
 S: Germany
 
+N: Jason Uhlenkott
+E: juhlenko@akamai.com
+D: I3000 EDAC driver
+
 N: Greg Ungerer
 E: gerg@snapgear.com
 D: uClinux kernel hacker

Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt

@@ -90,6 +90,47 @@ Required Properties:
 - interrupts      : Should be single bit error interrupt, then double bit error
 	interrupt, in this order.
 
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+QSPI FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-qspi-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent QSPI node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order for port A, and then single bit error interrupt,
+	then double bit error interrupt in this order for port B.
+
 Example:
 
 	eccmgr: eccmgr@ffd06000 {
@@ -132,4 +173,61 @@ Example:
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
 				     <37 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		nand-buf-ecc@ff8c2000 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2000 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
+				     <43 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c2400 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2400 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
+				     <45 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c2800 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2800 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+				     <44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c8000 {
+			compatible = "altr,socfpga-dma-ecc";
+			reg = <0xff8c8000 0x400>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+				     <42 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c8800 {
+			compatible = "altr,socfpga-usb-ecc";
+			reg = <0xff8c8800 0x400>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+				     <34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qspi-ecc@ff8c8400 {
+			compatible = "altr,socfpga-qspi-ecc";
+			reg = <0xff8c8400 0x400>;
+			altr,ecc-parent = <&qspi>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c2c00 {
+			compatible = "altr,socfpga-sdmmc-ecc";
+			reg = <0xff8c2c00 0x400>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+				     <47 IRQ_TYPE_LEVEL_HIGH>,
+				     <16 IRQ_TYPE_LEVEL_HIGH>,
+				     <48 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};

Documentation/devicetree/bindings/powerpc/fsl/mem-ctrlr.txt → Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt

@@ -7,6 +7,8 @@ Properties:
 		  "fsl,qoriq-memory-controller".
 - reg		: Address and size of DDR controller registers
 - interrupts	: Error interrupt of DDR controller
+- little-endian	: Specifies little-endian access to registers
+		  If omitted, big-endian will be used.
 
 Example 1:
 

MAINTAINERS

@@ -4410,7 +4410,6 @@ F:	Documentation/filesystems/ecryptfs.txt
 F:	fs/ecryptfs/
 
 EDAC-CORE
-M:	Doug Thompson <dougthompson@xmission.com>
 M:	Borislav Petkov <bp@alien8.de>
 M:	Mauro Carvalho Chehab <mchehab@s-opensource.com>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -4423,14 +4422,12 @@ F:	drivers/edac/
 F:	include/linux/edac.h
 
 EDAC-AMD64
-M:	Doug Thompson <dougthompson@xmission.com>
 M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-CALXEDA
-M:	Doug Thompson <dougthompson@xmission.com>
 M:	Robert Richter <rric@kernel.org>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
@@ -4446,17 +4443,21 @@ F:	drivers/edac/octeon_edac*
 
 EDAC-E752X
 M:	Mark Gross <mark.gross@intel.com>
-M:	Doug Thompson <dougthompson@xmission.com>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
-M:	Doug Thompson <dougthompson@xmission.com>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
+EDAC-FSL_DDR
+M:	York Sun <york.sun@nxp.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/fsl_ddr_edac.*
+
 EDAC-GHES
 M:	Mauro Carvalho Chehab <mchehab@s-opensource.com>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -4471,13 +4472,11 @@ S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
-M:	Jason Uhlenkott <juhlenko@akamai.com>
 L:	linux-edac@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/edac/i3000_edac.c
 
 EDAC-I5000
-M:	Doug Thompson <dougthompson@xmission.com>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/i5000_edac.c

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -639,6 +639,22 @@ emac0-tx-ecc@ff8c0c00 {
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
 					     <37 IRQ_TYPE_LEVEL_HIGH>;
 			};
+
+			dma-ecc@ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {

arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts

@@ -25,3 +25,15 @@ &mmc {
 	broken-cd;
 	bus-width = <4>;
 };
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};

arch/arm64/Kconfig.platforms

@@ -55,6 +55,7 @@ config ARCH_EXYNOS
 
 config ARCH_LAYERSCAPE
 	bool "ARMv8 based Freescale Layerscape SoC family"
+	select EDAC_SUPPORT
 	help
 	  This enables support for the Freescale Layerscape SoC family.
 

drivers/edac/Kconfig

@@ -266,6 +266,13 @@ config EDAC_MPC85XX
 	  Support for error detection and correction on the Freescale
 	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
 
+config EDAC_LAYERSCAPE
+	tristate "Freescale Layerscape DDR"
+	depends on EDAC_MM_EDAC && ARCH_LAYERSCAPE
+	help
+	  Support for error detection and correction on Freescale memory
+	  controllers on Layerscape SoCs.
+
 config EDAC_MV64X60
 	tristate "Marvell MV64x60"
 	depends on EDAC_MM_EDAC && MV64X60
@@ -406,6 +413,41 @@ config EDAC_ALTERA_ETHERNET
 	  Support for error detection and correction on the
 	  Altera Ethernet FIFO Memory for Altera SoCs.
 
+config EDAC_ALTERA_NAND
+	bool "Altera NAND FIFO ECC"
+	depends on EDAC_ALTERA=y && MTD_NAND_DENALI
+	help
+	  Support for error detection and correction on the
+	  Altera NAND FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_DMA
+	bool "Altera DMA FIFO ECC"
+	depends on EDAC_ALTERA=y && PL330_DMA=y
+	help
+	  Support for error detection and correction on the
+	  Altera DMA FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_USB
+	bool "Altera USB FIFO ECC"
+	depends on EDAC_ALTERA=y && USB_DWC2
+	help
+	  Support for error detection and correction on the
+	  Altera USB FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_QSPI
+	bool "Altera QSPI FIFO ECC"
+	depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI
+	help
+	  Support for error detection and correction on the
+	  Altera QSPI FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_SDMMC
+	bool "Altera SDMMC FIFO ECC"
+	depends on EDAC_ALTERA=y && MMC_DW
+	help
+	  Support for error detection and correction on the
+	  Altera SDMMC FIFO Memory for Altera SoCs.
+
 config EDAC_SYNOPSYS
 	tristate "Synopsys DDR Memory Controller"
 	depends on EDAC_MM_EDAC && ARCH_ZYNQ

drivers/edac/Makefile

@@ -51,7 +51,13 @@ amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o
 obj-$(CONFIG_EDAC_AMD64)		+= amd64_edac_mod.o
 
 obj-$(CONFIG_EDAC_PASEMI)		+= pasemi_edac.o
-obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac.o
+
+mpc85xx_edac_mod-y			:= fsl_ddr_edac.o mpc85xx_edac.o
+obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac_mod.o
+
+layerscape_edac_mod-y			:= fsl_ddr_edac.o layerscape_edac.o
+obj-$(CONFIG_EDAC_LAYERSCAPE)		+= layerscape_edac_mod.o
+
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
 obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
 obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o

drivers/edac/altera_edac.h

@@ -250,6 +250,8 @@ struct altr_sdram_mc_data {
 #define ALTR_A10_ECC_INTTEST_OFST       0x24
 #define ALTR_A10_ECC_TSERRA             BIT(0)
 #define ALTR_A10_ECC_TDERRA             BIT(8)
+#define ALTR_A10_ECC_TSERRB             BIT(16)
+#define ALTR_A10_ECC_TDERRB             BIT(24)
 
 /* ECC Manager Defines */
 #define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
@@ -288,6 +290,9 @@ struct altr_sdram_mc_data {
 /* Arria 10 Ethernet ECC Management Group Defines */
 #define ALTR_A10_COMMON_ECC_EN_CTL      BIT(0)
 
+/* Arria 10 SDMMC ECC Management Group Defines */
+#define ALTR_A10_SDMMC_IRQ_MASK         (BIT(16) | BIT(15))
+
 /* A10 ECC Controller memory initialization timeout */
 #define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
 
@@ -298,7 +303,6 @@ struct edac_device_prv_data {
 	int ce_clear_mask;
 	int ue_clear_mask;
 	int irq_status_mask;
-	char dbgfs_name[20];
 	void * (*alloc_mem)(size_t size, void **other);
 	void (*free_mem)(void *p, size_t size, void *other);
 	int ecc_enable_mask;

drivers/edac/amd64_edac.c

@@ -1425,11 +1425,17 @@ static u8 f1x_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
 
 		if (intlv_addr & 0x2) {
 			u8 shift = intlv_addr & 0x1 ? 9 : 6;
-			u32 temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2;
+			u32 temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) & 1;
 
 			return ((sys_addr >> shift) & 1) ^ temp;
 		}
 
+		if (intlv_addr & 0x4) {
+			u8 shift = intlv_addr & 0x1 ? 9 : 8;
+
+			return (sys_addr >> shift) & 1;
+		}
+
 		return (sys_addr >> (12 + hweight8(intlv_en))) & 1;
 	}
 
@@ -1726,8 +1732,11 @@ static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
 	if (!(num_dcts_intlv % 2 == 0) || (num_dcts_intlv > 4))
 		return -EINVAL;
 
-	channel = f15_m30h_determine_channel(pvt, sys_addr, intlv_en,
-					     num_dcts_intlv, dct_sel);
+	if (pvt->model >= 0x60)
+		channel = f1x_determine_channel(pvt, sys_addr, false, intlv_en);
+	else
+		channel = f15_m30h_determine_channel(pvt, sys_addr, intlv_en,
+						     num_dcts_intlv, dct_sel);
 
 	/* Verify we stay within the MAX number of channels allowed */
 	if (channel > 3)
@@ -2961,6 +2970,15 @@ static void setup_pci_device(void)
 	}
 }
 
+static const struct x86_cpu_id amd64_cpuids[] = {
+	{ X86_VENDOR_AMD, 0xF,	X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_AMD, 0x10, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_AMD, 0x15, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_AMD, 0x16, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids);
+
 static int __init amd64_edac_init(void)
 {
 	int err = -ENODEV;

drivers/edac/fsl_ddr_edac.h

+/*
+ * Freescale Memory Controller kernel module
+ *
+ * Support  Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
+ * ARM-based Layerscape SoCs including LS2xxx. Originally split
+ * out from mpc85xx_edac EDAC driver.
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#ifndef _FSL_DDR_EDAC_H_
+#define _FSL_DDR_EDAC_H_
+
+#define fsl_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "FSL_DDR", fmt, ##arg)
+
+/*
+ * DRAM error defines
+ */
+
+/* DDR_SDRAM_CFG */
+#define FSL_MC_DDR_SDRAM_CFG	0x0110
+#define FSL_MC_CS_BNDS_0		0x0000
+#define FSL_MC_CS_BNDS_OFS		0x0008
+
+#define FSL_MC_DATA_ERR_INJECT_HI	0x0e00
+#define FSL_MC_DATA_ERR_INJECT_LO	0x0e04
+#define FSL_MC_ECC_ERR_INJECT	0x0e08
+#define FSL_MC_CAPTURE_DATA_HI	0x0e20
+#define FSL_MC_CAPTURE_DATA_LO	0x0e24
+#define FSL_MC_CAPTURE_ECC		0x0e28
+#define FSL_MC_ERR_DETECT		0x0e40
+#define FSL_MC_ERR_DISABLE		0x0e44
+#define FSL_MC_ERR_INT_EN		0x0e48
+#define FSL_MC_CAPTURE_ATRIBUTES	0x0e4c
+#define FSL_MC_CAPTURE_ADDRESS	0x0e50
+#define FSL_MC_CAPTURE_EXT_ADDRESS	0x0e54
+#define FSL_MC_ERR_SBE		0x0e58
+
+#define DSC_MEM_EN	0x80000000
+#define DSC_ECC_EN	0x20000000
+#define DSC_RD_EN	0x10000000
+#define DSC_DBW_MASK	0x00180000
+#define DSC_DBW_32	0x00080000
+#define DSC_DBW_64	0x00000000
+
+#define DSC_SDTYPE_MASK		0x07000000
+#define DSC_X32_EN	0x00000020
+
+/* Err_Int_En */
+#define DDR_EIE_MSEE	0x1	/* memory select */
+#define DDR_EIE_SBEE	0x4	/* single-bit ECC error */
+#define DDR_EIE_MBEE	0x8	/* multi-bit ECC error */
+
+/* Err_Detect */
+#define DDR_EDE_MSE		0x1	/* memory select */
+#define DDR_EDE_SBE		0x4	/* single-bit ECC error */
+#define DDR_EDE_MBE		0x8	/* multi-bit ECC error */
+#define DDR_EDE_MME		0x80000000	/* multiple memory errors */
+
+/* Err_Disable */
+#define DDR_EDI_MSED	0x1	/* memory select disable */
+#define	DDR_EDI_SBED	0x4	/* single-bit ECC error disable */
+#define	DDR_EDI_MBED	0x8	/* multi-bit ECC error disable */
+
+struct fsl_mc_pdata {
+	char *name;
+	int edac_idx;
+	void __iomem *mc_vbase;
+	int irq;
+};
+int fsl_mc_err_probe(struct platform_device *op);
+int fsl_mc_err_remove(struct platform_device *op);
+#endif

drivers/edac/layerscape_edac.c

+/*
+ * Freescale Memory Controller kernel module
+ *
+ * Author: York Sun <york.sun@nxp.com>
+ *
+ * Copyright 2016 NXP Semiconductor
+ *
+ * Derived from mpc85xx_edac.c
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "edac_core.h"
+#include "fsl_ddr_edac.h"
+
+static const struct of_device_id fsl_ddr_mc_err_of_match[] = {
+	{ .compatible = "fsl,qoriq-memory-controller", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, fsl_ddr_mc_err_of_match);
+
+static struct platform_driver fsl_ddr_mc_err_driver = {
+	.probe = fsl_mc_err_probe,
+	.remove = fsl_mc_err_remove,
+	.driver = {
+		.name = "fsl_ddr_mc_err",
+		.of_match_table = fsl_ddr_mc_err_of_match,
+	},
+};
+
+static int __init fsl_ddr_mc_init(void)
+{
+	int res;
+
+	/* make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	res = platform_driver_register(&fsl_ddr_mc_err_driver);
+	if (res) {
+		pr_err("MC fails to register\n");
+		return res;
+	}
+
+	return 0;
+}
+
+module_init(fsl_ddr_mc_init);
+
+static void __exit fsl_ddr_mc_exit(void)
+{
+	platform_driver_unregister(&fsl_ddr_mc_err_driver);
+}
+
+module_exit(fsl_ddr_mc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NXP Semiconductor");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state,
+		 "EDAC Error Reporting state: 0=Poll, 2=Interrupt");

drivers/edac/mpc85xx_edac.h

@@ -17,65 +17,6 @@
 #define mpc85xx_printk(level, fmt, arg...) \
 	edac_printk(level, "MPC85xx", fmt, ##arg)
 
-#define mpc85xx_mc_printk(mci, level, fmt, arg...) \
-	edac_mc_chipset_printk(mci, level, "MPC85xx", fmt, ##arg)
-
-/*
- * DRAM error defines
- */
-
-/* DDR_SDRAM_CFG */
-#define MPC85XX_MC_DDR_SDRAM_CFG	0x0110
-#define MPC85XX_MC_CS_BNDS_0		0x0000
-#define MPC85XX_MC_CS_BNDS_1		0x0008
-#define MPC85XX_MC_CS_BNDS_2		0x0010
-#define MPC85XX_MC_CS_BNDS_3		0x0018
-#define MPC85XX_MC_CS_BNDS_OFS		0x0008
-
-#define MPC85XX_MC_DATA_ERR_INJECT_HI	0x0e00
-#define MPC85XX_MC_DATA_ERR_INJECT_LO	0x0e04
-#define MPC85XX_MC_ECC_ERR_INJECT	0x0e08
-#define MPC85XX_MC_CAPTURE_DATA_HI	0x0e20
-#define MPC85XX_MC_CAPTURE_DATA_LO	0x0e24
-#define MPC85XX_MC_CAPTURE_ECC		0x0e28
-#define MPC85XX_MC_ERR_DETECT		0x0e40
-#define MPC85XX_MC_ERR_DISABLE		0x0e44
-#define MPC85XX_MC_ERR_INT_EN		0x0e48
-#define MPC85XX_MC_CAPTURE_ATRIBUTES	0x0e4c
-#define MPC85XX_MC_CAPTURE_ADDRESS	0x0e50
-#define MPC85XX_MC_CAPTURE_EXT_ADDRESS	0x0e54
-#define MPC85XX_MC_ERR_SBE		0x0e58
-
-#define DSC_MEM_EN	0x80000000
-#define DSC_ECC_EN	0x20000000
-#define DSC_RD_EN	0x10000000
-#define DSC_DBW_MASK	0x00180000
-#define DSC_DBW_32	0x00080000
-#define DSC_DBW_64	0x00000000
-
-#define DSC_SDTYPE_MASK		0x07000000
-
-#define DSC_SDTYPE_DDR		0x02000000
-#define DSC_SDTYPE_DDR2		0x03000000
-#define DSC_SDTYPE_DDR3		0x07000000
-#define DSC_X32_EN	0x00000020
-
-/* Err_Int_En */
-#define DDR_EIE_MSEE	0x1	/* memory select */
-#define DDR_EIE_SBEE	0x4	/* single-bit ECC error */
-#define DDR_EIE_MBEE	0x8	/* multi-bit ECC error */
-
-/* Err_Detect */
-#define DDR_EDE_MSE		0x1	/* memory select */
-#define DDR_EDE_SBE		0x4	/* single-bit ECC error */
-#define DDR_EDE_MBE		0x8	/* multi-bit ECC error */
-#define DDR_EDE_MME		0x80000000	/* multiple memory errors */
-
-/* Err_Disable */
-#define DDR_EDI_MSED	0x1	/* memory select disable */
-#define	DDR_EDI_SBED	0x4	/* single-bit ECC error disable */
-#define	DDR_EDI_MBED	0x8	/* multi-bit ECC error disable */
-
 /*
  * L2 Err defines
  */
@@ -149,13 +90,6 @@
 #define MPC85XX_PCIE_ERR_CAP_R2		0x0030
 #define MPC85XX_PCIE_ERR_CAP_R3		0x0034
 
-struct mpc85xx_mc_pdata {
-	char *name;
-	int edac_idx;
-	void __iomem *mc_vbase;
-	int irq;
-};
-
 struct mpc85xx_l2_pdata {
 	char *name;
 	int edac_idx;

drivers/edac/mv64x60_edac.c

@@ -118,7 +118,6 @@ static int mv64x60_pci_err_probe(struct platform_device *pdev)
 
 	pdata->pci_hose = pdev->id;
 	pdata->name = "mpc85xx_pci_err";
-	pdata->irq = NO_IRQ;
 	platform_set_drvdata(pdev, pci);
 	pci->dev = &pdev->dev;
 	pci->dev_name = dev_name(&pdev->dev);
@@ -291,7 +290,6 @@ static int mv64x60_sram_err_probe(struct platform_device *pdev)
 
 	pdata = edac_dev->pvt_info;
 	pdata->name = "mv64x60_sram_err";
-	pdata->irq = NO_IRQ;
 	edac_dev->dev = &pdev->dev;
 	platform_set_drvdata(pdev, edac_dev);
 	edac_dev->dev_name = dev_name(&pdev->dev);
@@ -459,7 +457,6 @@ static int mv64x60_cpu_err_probe(struct platform_device *pdev)
 
 	pdata = edac_dev->pvt_info;
 	pdata->name = "mv64x60_cpu_err";
-	pdata->irq = NO_IRQ;
 	edac_dev->dev = &pdev->dev;
 	platform_set_drvdata(pdev, edac_dev);
 	edac_dev->dev_name = dev_name(&pdev->dev);
@@ -727,7 +724,6 @@ static int mv64x60_mc_err_probe(struct platform_device *pdev)
 	mci->pdev = &pdev->dev;
 	platform_set_drvdata(pdev, mci);
 	pdata->name = "mv64x60_mc_err";
-	pdata->irq = NO_IRQ;
 	mci->dev_name = dev_name(&pdev->dev);
 	pdata->edac_idx = edac_mc_idx++;
 

drivers/edac/ppc4xx_edac.c

@@ -1029,8 +1029,6 @@ static int ppc4xx_edac_mc_init(struct mem_ctl_info *mci,
 	pdata			= mci->pvt_info;
 
 	pdata->dcr_host		= *dcr_host;
-	pdata->irqs.sec		= NO_IRQ;
-	pdata->irqs.ded		= NO_IRQ;
 
 	/* Initialize controller capabilities and configuration */
 
@@ -1111,7 +1109,7 @@ static int ppc4xx_edac_register_irq(struct platform_device *op,
 	ded_irq = irq_of_parse_and_map(np, INTMAP_ECCDED_INDEX);
 	sec_irq = irq_of_parse_and_map(np, INTMAP_ECCSEC_INDEX);
 
-	if (ded_irq == NO_IRQ || sec_irq == NO_IRQ) {
+	if (!ded_irq || !sec_irq) {
 		ppc4xx_edac_mc_printk(KERN_ERR, mci,
 				      "Unable to map interrupts.\n");
 		status = -ENODEV;

drivers/edac/sb_edac.c

@@ -2474,7 +2474,7 @@ static int sbridge_mci_bind_devs(struct mem_ctl_info *mci,
 
 	/* Check if everything were registered */
 	if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha0 ||
-	    !pvt-> pci_tad || !pvt->pci_ras  || !pvt->pci_ta)
+	    !pvt->pci_ras || !pvt->pci_ta)
 		goto enodev;
 
 	if (saw_chan_mask != 0x0f)
@@ -2563,8 +2563,7 @@ static int ibridge_mci_bind_devs(struct mem_ctl_info *mci,
 
 	/* Check if everything were registered */
 	if (!pvt->pci_sad0 || !pvt->pci_ha0 || !pvt->pci_br0 ||
-	    !pvt->pci_br1 || !pvt->pci_tad || !pvt->pci_ras  ||
-	    !pvt->pci_ta)
+	    !pvt->pci_br1 || !pvt->pci_ras || !pvt->pci_ta)
 		goto enodev;
 
 	if (saw_chan_mask != 0x0f && /* -EN */

drivers/edac/wq.c

@@ -27,7 +27,7 @@ EXPORT_SYMBOL_GPL(edac_stop_work);
 
 int edac_workqueue_setup(void)
 {
-	wq = create_singlethread_workqueue("edac-poller");
+	wq = alloc_ordered_workqueue("edac-poller", WQ_MEM_RECLAIM);
 	if (!wq)
 		return -ENODEV;
 	else