ath9k_hw: Fix radio programming for AR9550

For AR9550, program the synth value based on the ref. clock.
The logic for AR9550 is similar to AR9330, but keep the code
separate since changes for AR9330 are required - which would be
done later.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_phy.c

@@ -68,7 +68,7 @@ static const int m2ThreshExt_off = 127;
 static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	u16 bMode, fracMode = 0, aModeRefSel = 0;
-	u32 freq, channelSel = 0, reg32 = 0;
+	u32 freq, chan_frac, div, channelSel = 0, reg32 = 0;
 	struct chan_centers centers;
 	int loadSynthChannel;
 
@@ -77,9 +77,6 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	if (freq < 4800) {     /* 2 GHz, fractional mode */
 		if (AR_SREV_9330(ah)) {
-			u32 chan_frac;
-			u32 div;
-
 			if (ah->is_clk_25mhz)
 				div = 75;
 			else
@@ -89,34 +86,40 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 			chan_frac = (((freq * 4) % div) * 0x20000) / div;
 			channelSel = (channelSel << 17) | chan_frac;
 		} else if (AR_SREV_9485(ah) || AR_SREV_9565(ah)) {
-			u32 chan_frac;
-
 			/*
-			 * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0
+			 * freq_ref = 40 / (refdiva >> amoderefsel);
+			 * where refdiva=1 and amoderefsel=0
 			 * ndiv = ((chan_mhz * 4) / 3) / freq_ref;
 			 * chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000
 			 */
 			channelSel = (freq * 4) / 120;
 			chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
 			channelSel = (channelSel << 17) | chan_frac;
-		} else if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
+		} else if (AR_SREV_9340(ah)) {
 			if (ah->is_clk_25mhz) {
-				u32 chan_frac;
-
 				channelSel = (freq * 2) / 75;
 				chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
 				channelSel = (channelSel << 17) | chan_frac;
-			} else
+			} else {
 				channelSel = CHANSEL_2G(freq) >> 1;
-		} else
+			}
+		} else if (AR_SREV_9550(ah)) {
+			if (ah->is_clk_25mhz)
+				div = 75;
+			else
+				div = 120;
+
+			channelSel = (freq * 4) / div;
+			chan_frac = (((freq * 4) % div) * 0x20000) / div;
+			channelSel = (channelSel << 17) | chan_frac;
+		} else {
 			channelSel = CHANSEL_2G(freq);
+		}
 		/* Set to 2G mode */
 		bMode = 1;
 	} else {
 		if ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) &&
 		    ah->is_clk_25mhz) {
-			u32 chan_frac;
-
 			channelSel = freq / 75;
 			chan_frac = ((freq % 75) * 0x20000) / 75;
 			channelSel = (channelSel << 17) | chan_frac;