powerpc/32: implement fast entry for syscalls on BOOKE

This patch implements a fast entry for syscalls.

Syscalls don't have to preserve non volatile registers except LR.

This patch then implement a fast entry for syscalls, where
volatile registers get clobbered.

As this entry is dedicated to syscall it always sets MSR_EE
and warns in case MSR_EE was previously off

It also assumes that the call is always from user, system calls are
unexpected from kernel.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/kernel/entry_32.S

@@ -342,7 +342,6 @@ stack_ovf:
 	SYNC
 	RFI
 
-#ifndef CONFIG_BOOKE	/* to be removed once BOOKE uses fast syscall entry */
 #ifdef CONFIG_TRACE_IRQFLAGS
 trace_syscall_entry_irq_off:
 	/*
@@ -369,7 +368,6 @@ transfer_to_syscall:
 	andi.	r12,r9,MSR_EE
 	beq-	trace_syscall_entry_irq_off
 #endif /* CONFIG_TRACE_IRQFLAGS */
-#endif /* !CONFIG_BOOKE */
 
 /*
  * Handle a system call.
@@ -382,11 +380,6 @@ _GLOBAL(DoSyscall)
 	stw	r3,ORIG_GPR3(r1)
 	li	r12,0
 	stw	r12,RESULT(r1)
-#ifdef CONFIG_BOOKE	/* to be removed once BOOKE uses fast syscall entry */
-	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
-	rlwinm	r11,r11,0,4,2
-	stw	r11,_CCR(r1)
-#endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/* Make sure interrupts are enabled */
 	mfmsr	r11

arch/powerpc/kernel/head_44x.S

@@ -285,8 +285,7 @@ interrupt_base:
 #endif
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG(BOOKE_INTERRUPT_SYSCALL)
-	EXC_XFER_SYS(0x0c00, DoSyscall)
+	SYSCALL_ENTRY   0xc00 BOOKE_INTERRUPT_SYSCALL
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2020, BOOKE_INTERRUPT_AP_UNAVAIL, \

arch/powerpc/kernel/head_booke.h

@@ -6,6 +6,8 @@
 #include <asm/kvm_asm.h>
 #include <asm/kvm_booke_hv_asm.h>
 
+#ifdef __ASSEMBLY__
+
 /*
  * Macros used for common Book-e exception handling
  */
@@ -81,6 +83,101 @@ END_BTB_FLUSH_SECTION
 	SAVE_4GPRS(3, r11);						     \
 	SAVE_2GPRS(7, r11)
 
+.macro SYSCALL_ENTRY trapno intno
+	mfspr	r10, SPRN_SPRG_THREAD
+#ifdef CONFIG_KVM_BOOKE_HV
+BEGIN_FTR_SECTION
+	mtspr	SPRN_SPRG_WSCRATCH0, r10
+	stw	r11, THREAD_NORMSAVE(0)(r10)
+	stw	r13, THREAD_NORMSAVE(2)(r10)
+	mfcr	r13			/* save CR in r13 for now	   */
+	mfspr	r11, SPRN_SRR1
+	mtocrf	0x80, r11	/* check MSR[GS] without clobbering reg */
+	bf	3, 1975f
+	b	kvmppc_handler_BOOKE_INTERRUPT_\intno\()_SPRN_SRR1
+1975:
+	mr	r12, r13
+	lwz	r13, THREAD_NORMSAVE(2)(r10)
+FTR_SECTION_ELSE
+#endif
+	mfcr	r12
+#ifdef CONFIG_KVM_BOOKE_HV
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
+#endif
+	BOOKE_CLEAR_BTB(r11)
+	lwz	r11, TASK_STACK - THREAD(r10)
+	rlwinm	r12,r12,0,4,2	/* Clear SO bit in CR */
+	ALLOC_STACK_FRAME(r11, THREAD_SIZE - INT_FRAME_SIZE)
+	stw	r12, _CCR(r11)		/* save various registers */
+	mflr	r12
+	stw	r12,_LINK(r11)
+	mfspr	r12,SPRN_SRR0
+	stw	r1, GPR1(r11)
+	mfspr	r9,SPRN_SRR1
+	stw	r1, 0(r11)
+	mr	r1, r11
+	stw	r12,_NIP(r11)
+	rlwinm	r9,r9,0,14,12		/* clear MSR_WE (necessary?)	   */
+	lis	r12, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
+	stw	r2,GPR2(r11)
+	addi	r12, r12, STACK_FRAME_REGS_MARKER@l
+	stw	r9,_MSR(r11)
+	li	r2, \trapno + 1
+	stw	r12, 8(r11)
+	stw	r2,_TRAP(r11)
+	SAVE_GPR(0, r11)
+	SAVE_4GPRS(3, r11)
+	SAVE_2GPRS(7, r11)
+
+	addi	r11,r1,STACK_FRAME_OVERHEAD
+	addi	r2,r10,-THREAD
+	stw	r11,PT_REGS(r10)
+	/* Check to see if the dbcr0 register is set up to debug.  Use the
+	   internal debug mode bit to do this. */
+	lwz	r12,THREAD_DBCR0(r10)
+	andis.	r12,r12,DBCR0_IDM@h
+	ACCOUNT_CPU_USER_ENTRY(r2, r11, r12)
+	beq+	3f
+	/* From user and task is ptraced - load up global dbcr0 */
+	li	r12,-1			/* clear all pending debug events */
+	mtspr	SPRN_DBSR,r12
+	lis	r11,global_dbcr0@ha
+	tophys(r11,r11)
+	addi	r11,r11,global_dbcr0@l
+#ifdef CONFIG_SMP
+	lwz	r9,TASK_CPU(r2)
+	slwi	r9,r9,3
+	add	r11,r11,r9
+#endif
+	lwz	r12,0(r11)
+	mtspr	SPRN_DBCR0,r12
+	lwz	r12,4(r11)
+	addi	r12,r12,-1
+	stw	r12,4(r11)
+
+3:
+	tovirt(r2, r2)			/* set r2 to current */
+	lis	r11, transfer_to_syscall@h
+	ori	r11, r11, transfer_to_syscall@l
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/*
+	 * If MSR is changing we need to keep interrupts disabled at this point
+	 * otherwise we might risk taking an interrupt before we tell lockdep
+	 * they are enabled.
+	 */
+	lis	r10, MSR_KERNEL@h
+	ori	r10, r10, MSR_KERNEL@l
+	rlwimi	r10, r9, 0, MSR_EE
+#else
+	lis	r10, (MSR_KERNEL | MSR_EE)@h
+	ori	r10, r10, (MSR_KERNEL | MSR_EE)@l
+#endif
+	mtspr	SPRN_SRR1,r10
+	mtspr	SPRN_SRR0,r11
+	SYNC
+	RFI				/* jump to handler, enable MMU */
+.endm
+
 /* To handle the additional exception priority levels on 40x and Book-E
  * processors we allocate a stack per additional priority level.
  *
@@ -245,10 +342,6 @@ END_BTB_FLUSH_SECTION
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
 			  ret_from_except)
 
-#define EXC_XFER_SYS(n, hdlr)						\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL | MSR_EE, transfer_to_handler, \
-			  ret_from_except)
-
 /* Check for a single step debug exception while in an exception
  * handler before state has been saved.  This is to catch the case
  * where an instruction that we are trying to single step causes
@@ -418,7 +511,7 @@ END_BTB_FLUSH_SECTION
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_STD(0x800, kernel_fp_unavailable_exception)
 
-#ifndef __ASSEMBLY__
+#else /* __ASSEMBLY__ */
 struct exception_regs {
 	unsigned long mas0;
 	unsigned long mas1;

arch/powerpc/kernel/head_fsl_booke.S

@@ -413,8 +413,7 @@ interrupt_base:
 
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG(SYSCALL)
-	EXC_XFER_SYS(0x0c00, DoSyscall)
+	SYSCALL_ENTRY   0xc00 SYSCALL
 
 	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2900, AP_UNAVAIL, AuxillaryProcessorUnavailable, \