Merge branch 'mmp/fixes' into arm/fixes

These three fixes should make it into linux-5.7 and
also into the branch for other mmp dt changes for v5.8,
so I created a branch for them.

* mmp/fixes:
  ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
  ARM: dts: mmp3-dell-ariel: Fix the SPI devices
  ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/mmp3-dell-ariel.dts

@@ -98,19 +98,19 @@ &twsi4 {
 	status = "okay";
 };
 
-&ssp3 {
+&ssp1 {
 	status = "okay";
-	cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 
 	firmware-flash@0 {
-		compatible = "st,m25p80", "jedec,spi-nor";
+		compatible = "winbond,w25q32", "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <40000000>;
+		spi-max-frequency = <104000000>;
 		m25p,fast-read;
 	};
 };
 
-&ssp4 {
-	cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
+&ssp2 {
+	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/mmp3.dtsi

@@ -202,8 +202,7 @@ usb_otg0: usb-otg@d4208000 {
 			};
 
 			hsic_phy0: hsic-phy@f0001800 {
-				compatible = "marvell,mmp3-hsic-phy",
-					     "usb-nop-xceiv";
+				compatible = "marvell,mmp3-hsic-phy";
 				reg = <0xf0001800 0x40>;
 				#phy-cells = <0>;
 				status = "disabled";
@@ -224,8 +223,7 @@ hsic0: hsic@f0001000 {
 			};
 
 			hsic_phy1: hsic-phy@f0002800 {
-				compatible = "marvell,mmp3-hsic-phy",
-					     "usb-nop-xceiv";
+				compatible = "marvell,mmp3-hsic-phy";
 				reg = <0xf0002800 0x40>;
 				#phy-cells = <0>;
 				status = "disabled";
@@ -531,7 +529,7 @@ l2: l2-cache-controller@d0020000 {
 		};
 
 		soc_clocks: clocks@d4050000 {
-			compatible = "marvell,mmp2-clock";
+			compatible = "marvell,mmp3-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
 			      <0xd4015000 0x1000>;