Commit 1a97f144 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: ni_at_a2150: remove depends on ISA_DMA_API limitation

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 860f7c09
......@@ -462,7 +462,7 @@ config COMEDI_ADQ12B
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
depends on ISA_DMA_API
select COMEDI_ISADMA if ISA_DMA_API
---help---
Enable support for National Instruments AT-A2150 cards
......
......@@ -62,14 +62,13 @@ TRIG_WAKE_EOS
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include "../comedidev.h"
#include <linux/io.h>
#include <asm/dma.h>
#include "../comedidev.h"
#include "8253.h"
#include "comedi_isadma.h"
#include "comedi_fc.h"
#include "8253.h"
#define A2150_DMA_BUFFER_SIZE 0xff00 /* size in bytes of dma buffer */
......@@ -145,85 +144,42 @@ static const struct a2150_board a2150_boards[] = {
},
};
struct a2150_dma_desc {
unsigned int chan; /* DMA channel */
void *virt_addr; /* virtual address of DMA buffer */
dma_addr_t hw_addr; /* hardware (bus) address of DMA buffer */
unsigned int size; /* size of DMA transfer (in bytes) */
};
struct a2150_private {
struct a2150_dma_desc dma_desc;
struct comedi_isadma *dma;
unsigned int count; /* number of data points left to be taken */
int irq_dma_bits; /* irq/dma register bits */
int config_bits; /* config register bits */
};
static void a2150_isadma_program(struct a2150_dma_desc *dma)
{
unsigned long flags;
flags = claim_dma_lock();
clear_dma_ff(dma->chan);
set_dma_mode(dma->chan, DMA_MODE_READ);
set_dma_addr(dma->chan, dma->hw_addr);
set_dma_count(dma->chan, dma->size);
enable_dma(dma->chan);
release_dma_lock(flags);
}
static unsigned int a2150_isadma_disable(struct a2150_dma_desc *dma)
{
unsigned long flags;
unsigned int residue;
flags = claim_dma_lock();
disable_dma(dma->chan);
residue = get_dma_residue(dma->chan);
release_dma_lock(flags);
return residue;
}
/* interrupt service routine */
static irqreturn_t a2150_interrupt(int irq, void *d)
{
int i;
int status;
struct comedi_device *dev = d;
struct a2150_private *devpriv = dev->private;
struct a2150_dma_desc *dma = &devpriv->dma_desc;
struct comedi_isadma *dma = devpriv->dma;
struct comedi_isadma_desc *desc = &dma->desc[0];
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async;
struct comedi_cmd *cmd;
unsigned short *buf = dma->virt_addr;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
unsigned short *buf = desc->virt_addr;
unsigned int max_points, num_points, residue, leftover;
unsigned short dpnt;
int status;
int i;
if (!dev->attached) {
dev_err(dev->class_dev, "premature interrupt\n");
if (!dev->attached)
return IRQ_HANDLED;
}
/* initialize async here to make sure s is not NULL */
async = s->async;
cmd = &async->cmd;
status = inw(dev->iobase + STATUS_REG);
if ((status & INTR_BIT) == 0) {
dev_err(dev->class_dev, "spurious interrupt\n");
if ((status & INTR_BIT) == 0)
return IRQ_NONE;
}
if (status & OVFL_BIT) {
dev_err(dev->class_dev, "fifo overflow\n");
async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
comedi_handle_events(dev, s);
}
if ((status & DMA_TC_BIT) == 0) {
dev_err(dev->class_dev,
"caught non-dma interrupt? Aborting.\n");
async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
comedi_handle_events(dev, s);
return IRQ_HANDLED;
......@@ -234,10 +190,10 @@ static irqreturn_t a2150_interrupt(int irq, void *d)
* transfer. It should always be zero at this point unless
* the stop_src is set to external triggering.
*/
residue = a2150_isadma_disable(dma);
residue = comedi_isadma_disable(desc->chan);
/* figure out how many points to read */
max_points = comedi_bytes_to_samples(s, dma->size);
max_points = comedi_bytes_to_samples(s, desc->size);
num_points = max_points - comedi_bytes_to_samples(s, residue);
if (devpriv->count < num_points && cmd->stop_src == TRIG_COUNT)
num_points = devpriv->count;
......@@ -245,7 +201,7 @@ static irqreturn_t a2150_interrupt(int irq, void *d)
/* figure out how many points will be stored next time */
leftover = 0;
if (cmd->stop_src == TRIG_NONE) {
leftover = comedi_bytes_to_samples(s, dma->size);
leftover = comedi_bytes_to_samples(s, desc->size);
} else if (devpriv->count > max_points) {
leftover = devpriv->count - max_points;
if (leftover > max_points)
......@@ -273,8 +229,8 @@ static irqreturn_t a2150_interrupt(int irq, void *d)
}
/* re-enable dma */
if (leftover) {
dma->size = comedi_samples_to_bytes(s, leftover);
a2150_isadma_program(dma);
desc->size = comedi_samples_to_bytes(s, leftover);
comedi_isadma_program(desc);
}
comedi_handle_events(dev, s);
......@@ -288,14 +244,15 @@ static irqreturn_t a2150_interrupt(int irq, void *d)
static int a2150_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct a2150_private *devpriv = dev->private;
struct a2150_dma_desc *dma = &devpriv->dma_desc;
struct comedi_isadma *dma = devpriv->dma;
struct comedi_isadma_desc *desc = &dma->desc[0];
/* disable dma on card */
devpriv->irq_dma_bits &= ~DMA_INTR_EN_BIT & ~DMA_EN_BIT;
outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
/* disable computer's dma */
a2150_isadma_disable(dma);
comedi_isadma_disable(desc->chan);
/* clear fifo and reset triggering circuitry */
outw(0, dev->iobase + FIFO_RESET_REG);
......@@ -527,7 +484,8 @@ static int a2150_ai_cmdtest(struct comedi_device *dev,
static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct a2150_private *devpriv = dev->private;
struct a2150_dma_desc *dma = &devpriv->dma_desc;
struct comedi_isadma *dma = devpriv->dma;
struct comedi_isadma_desc *desc = &dma->desc[0];
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
unsigned long timer_base = dev->iobase + I8253_BASE_REG;
......@@ -566,19 +524,19 @@ static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* initialize number of samples remaining */
devpriv->count = cmd->stop_arg * cmd->chanlist_len;
a2150_isadma_disable(dma);
comedi_isadma_disable(desc->chan);
/* set size of transfer to fill in 1/3 second */
#define ONE_THIRD_SECOND 333333333
dma->size = comedi_bytes_per_sample(s) * cmd->chanlist_len *
desc->size = comedi_bytes_per_sample(s) * cmd->chanlist_len *
ONE_THIRD_SECOND / cmd->scan_begin_arg;
if (dma->size > A2150_DMA_BUFFER_SIZE)
dma->size = A2150_DMA_BUFFER_SIZE;
if (dma->size < comedi_bytes_per_sample(s))
dma->size = comedi_bytes_per_sample(s);
dma->size -= dma->size % comedi_bytes_per_sample(s);
if (desc->size > desc->maxsize)
desc->size = desc->maxsize;
if (desc->size < comedi_bytes_per_sample(s))
desc->size = comedi_bytes_per_sample(s);
desc->size -= desc->size % comedi_bytes_per_sample(s);
a2150_isadma_program(dma);
comedi_isadma_program(desc);
/* clear dma interrupt before enabling it, to try and get rid of that
* one spurious interrupt that has been happening */
......@@ -693,64 +651,43 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
return n;
}
static void a2150_alloc_irq_dma(struct comedi_device *dev,
struct comedi_devconfig *it)
static void a2150_alloc_irq_and_dma(struct comedi_device *dev,
struct comedi_devconfig *it)
{
struct a2150_private *devpriv = dev->private;
struct a2150_dma_desc *dma = &devpriv->dma_desc;
unsigned int irq_num = it->options[1];
unsigned int dma_chan = it->options[2];
/*
* Only IRQs 15, 14, 12-9, and 7-3 are valid.
* Only DMA channels 7-5 and 3-0 are valid.
*
* Both must be valid for async command support.
*/
if (irq_num > 15 || dma_chan > 7 ||
!((1 << irq_num) & 0xdef8) || !((1 << dma_chan) & 0xef))
return;
/*
* Request the IRQ and DMA channels and allocate the DMA buffer.
* If the requests or allocation fail async command supprt will
* not be available.
*/
if (request_irq(irq_num, a2150_interrupt, 0, dev->board_name, dev))
return;
if (request_dma(dma_chan, dev->board_name)) {
free_irq(irq_num, dev);
return;
}
dma->virt_addr = dma_alloc_coherent(NULL, A2150_DMA_BUFFER_SIZE,
&dma->hw_addr, GFP_KERNEL);
if (!dma->virt_addr) {
free_dma(dma_chan);
/* DMA uses 1 buffer */
devpriv->dma = comedi_isadma_alloc(dev, 1, dma_chan, dma_chan,
A2150_DMA_BUFFER_SIZE,
COMEDI_ISADMA_READ);
if (!devpriv->dma) {
free_irq(irq_num, dev);
return;
} else {
dev->irq = irq_num;
devpriv->irq_dma_bits = IRQ_LVL_BITS(irq_num) |
DMA_CHAN_BITS(dma_chan);
}
dev->irq = irq_num;
dma->chan = dma_chan;
devpriv->irq_dma_bits = IRQ_LVL_BITS(irq_num) | DMA_CHAN_BITS(dma_chan);
a2150_isadma_disable(dma);
}
static void a2150_free_dma(struct comedi_device *dev)
{
struct a2150_private *devpriv = dev->private;
struct a2150_dma_desc *dma;
if (!devpriv)
return;
dma = &devpriv->dma_desc;
if (dma->chan)
free_dma(dma->chan);
if (dma->virt_addr)
dma_free_coherent(NULL, A2150_DMA_BUFFER_SIZE,
dma->virt_addr, dma->hw_addr);
if (devpriv)
comedi_isadma_free(devpriv->dma);
}
/* probes board type, returns offset */
......@@ -786,7 +723,8 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
thisboard = dev->board_ptr;
dev->board_name = thisboard->name;
a2150_alloc_irq_dma(dev, it);
/* an IRQ and DMA are required to support async commands */
a2150_alloc_irq_and_dma(dev, it);
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment