Commit 1ada9010 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'char-misc-5.8-rc7' of...

Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master

Pull char/misc driver fixes from Greg KH:
 "Here are a few small driver fixes for 5.8-rc7

  They include:

   - habanalabs fixes

   - tiny fpga driver fixes

   - /dev/mem fixup from previous changes

   - interconnect driver fixes

   - binder fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  interconnect: msm8916: Fix buswidth of pcnoc_s nodes
  interconnect: Do not skip aggregation for disabled paths
  /dev/mem: Add missing memory barriers for devmem_inode
  binder: Don't use mmput() from shrinker function.
  habanalabs: prevent possible out-of-bounds array access
  fpga: dfl: fix bug in port reset handshake
  fpga: dfl: pci: reduce the scope of variable 'ret'
  habanalabs: set 4s timeout for message to device CPU
  habanalabs: set clock gating per engine
  habanalabs: block WREG_BULK packet on PDMA
parents 7f2e231c 92d232d1
......@@ -16,7 +16,16 @@ Description: Allow the root user to disable/enable in runtime the clock
gating mechanism in Gaudi. Due to how Gaudi is built, the
clock gating needs to be disabled in order to access the
registers of the TPC and MME engines. This is sometimes needed
during debug by the user and hence the user needs this option
during debug by the user and hence the user needs this option.
The user can supply a bitmask value, each bit represents
a different engine to disable/enable its clock gating feature.
The bitmask is composed of 20 bits:
0 - 7 : DMA channels
8 - 11 : MME engines
12 - 19 : TPC engines
The bit's location of a specific engine can be determined
using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
are defined in uapi habanalabs.h file in enum gaudi_engine_id
What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers
Date: Jan 2019
......
......@@ -947,7 +947,7 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
trace_binder_unmap_user_end(alloc, index);
}
mmap_read_unlock(mm);
mmput(mm);
mmput_async(mm);
trace_binder_unmap_kernel_start(alloc, index);
......
......@@ -814,7 +814,8 @@ static struct inode *devmem_inode;
#ifdef CONFIG_IO_STRICT_DEVMEM
void revoke_devmem(struct resource *res)
{
struct inode *inode = READ_ONCE(devmem_inode);
/* pairs with smp_store_release() in devmem_init_inode() */
struct inode *inode = smp_load_acquire(&devmem_inode);
/*
* Check that the initialization has completed. Losing the race
......@@ -1028,8 +1029,11 @@ static int devmem_init_inode(void)
return rc;
}
/* publish /dev/mem initialized */
WRITE_ONCE(devmem_inode, inode);
/*
* Publish /dev/mem initialized.
* Pairs with smp_load_acquire() in revoke_devmem().
*/
smp_store_release(&devmem_inode, inode);
return 0;
}
......
......@@ -83,7 +83,8 @@ int __afu_port_disable(struct platform_device *pdev)
* on this port and minimum soft reset pulse width has elapsed.
* Driver polls port_soft_reset_ack to determine if reset done by HW.
*/
if (readq_poll_timeout(base + PORT_HDR_CTRL, v, v & PORT_CTRL_SFTRST,
if (readq_poll_timeout(base + PORT_HDR_CTRL, v,
v & PORT_CTRL_SFTRST_ACK,
RST_POLL_INVL, RST_POLL_TIMEOUT)) {
dev_err(&pdev->dev, "timeout, fail to reset device\n");
return -ETIMEDOUT;
......
......@@ -227,7 +227,6 @@ static int cci_pci_sriov_configure(struct pci_dev *pcidev, int num_vfs)
{
struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
struct dfl_fpga_cdev *cdev = drvdata->cdev;
int ret = 0;
if (!num_vfs) {
/*
......@@ -239,6 +238,8 @@ static int cci_pci_sriov_configure(struct pci_dev *pcidev, int num_vfs)
dfl_fpga_cdev_config_ports_pf(cdev);
} else {
int ret;
/*
* before enable SRIOV, put released ports into VF access mode
* first of all.
......
......@@ -243,6 +243,7 @@ static int aggregate_requests(struct icc_node *node)
{
struct icc_provider *p = node->provider;
struct icc_req *r;
u32 avg_bw, peak_bw;
node->avg_bw = 0;
node->peak_bw = 0;
......@@ -251,9 +252,14 @@ static int aggregate_requests(struct icc_node *node)
p->pre_aggregate(node);
hlist_for_each_entry(r, &node->req_list, req_node) {
if (!r->enabled)
continue;
p->aggregate(node, r->tag, r->avg_bw, r->peak_bw,
if (r->enabled) {
avg_bw = r->avg_bw;
peak_bw = r->peak_bw;
} else {
avg_bw = 0;
peak_bw = 0;
}
p->aggregate(node, r->tag, avg_bw, peak_bw,
&node->avg_bw, &node->peak_bw);
}
......
......@@ -197,13 +197,13 @@ DEFINE_QNODE(pcnoc_int_0, MSM8916_PNOC_INT_0, 8, -1, -1, MSM8916_PNOC_SNOC_MAS,
DEFINE_QNODE(pcnoc_int_1, MSM8916_PNOC_INT_1, 8, -1, -1, MSM8916_PNOC_SNOC_MAS);
DEFINE_QNODE(pcnoc_m_0, MSM8916_PNOC_MAS_0, 8, -1, -1, MSM8916_PNOC_INT_0);
DEFINE_QNODE(pcnoc_m_1, MSM8916_PNOC_MAS_1, 8, -1, -1, MSM8916_PNOC_SNOC_MAS);
DEFINE_QNODE(pcnoc_s_0, MSM8916_PNOC_SLV_0, 8, -1, -1, MSM8916_SLAVE_CLK_CTL, MSM8916_SLAVE_TLMM, MSM8916_SLAVE_TCSR, MSM8916_SLAVE_SECURITY, MSM8916_SLAVE_MSS);
DEFINE_QNODE(pcnoc_s_1, MSM8916_PNOC_SLV_1, 8, -1, -1, MSM8916_SLAVE_IMEM_CFG, MSM8916_SLAVE_CRYPTO_0_CFG, MSM8916_SLAVE_MSG_RAM, MSM8916_SLAVE_PDM, MSM8916_SLAVE_PRNG);
DEFINE_QNODE(pcnoc_s_2, MSM8916_PNOC_SLV_2, 8, -1, -1, MSM8916_SLAVE_SPDM, MSM8916_SLAVE_BOOT_ROM, MSM8916_SLAVE_BIMC_CFG, MSM8916_SLAVE_PNOC_CFG, MSM8916_SLAVE_PMIC_ARB);
DEFINE_QNODE(pcnoc_s_3, MSM8916_PNOC_SLV_3, 8, -1, -1, MSM8916_SLAVE_MPM, MSM8916_SLAVE_SNOC_CFG, MSM8916_SLAVE_RBCPR_CFG, MSM8916_SLAVE_QDSS_CFG, MSM8916_SLAVE_DEHR_CFG);
DEFINE_QNODE(pcnoc_s_4, MSM8916_PNOC_SLV_4, 8, -1, -1, MSM8916_SLAVE_VENUS_CFG, MSM8916_SLAVE_CAMERA_CFG, MSM8916_SLAVE_DISPLAY_CFG);
DEFINE_QNODE(pcnoc_s_8, MSM8916_PNOC_SLV_8, 8, -1, -1, MSM8916_SLAVE_USB_HS, MSM8916_SLAVE_SDCC_1, MSM8916_SLAVE_BLSP_1);
DEFINE_QNODE(pcnoc_s_9, MSM8916_PNOC_SLV_9, 8, -1, -1, MSM8916_SLAVE_SDCC_2, MSM8916_SLAVE_LPASS, MSM8916_SLAVE_GRAPHICS_3D_CFG);
DEFINE_QNODE(pcnoc_s_0, MSM8916_PNOC_SLV_0, 4, -1, -1, MSM8916_SLAVE_CLK_CTL, MSM8916_SLAVE_TLMM, MSM8916_SLAVE_TCSR, MSM8916_SLAVE_SECURITY, MSM8916_SLAVE_MSS);
DEFINE_QNODE(pcnoc_s_1, MSM8916_PNOC_SLV_1, 4, -1, -1, MSM8916_SLAVE_IMEM_CFG, MSM8916_SLAVE_CRYPTO_0_CFG, MSM8916_SLAVE_MSG_RAM, MSM8916_SLAVE_PDM, MSM8916_SLAVE_PRNG);
DEFINE_QNODE(pcnoc_s_2, MSM8916_PNOC_SLV_2, 4, -1, -1, MSM8916_SLAVE_SPDM, MSM8916_SLAVE_BOOT_ROM, MSM8916_SLAVE_BIMC_CFG, MSM8916_SLAVE_PNOC_CFG, MSM8916_SLAVE_PMIC_ARB);
DEFINE_QNODE(pcnoc_s_3, MSM8916_PNOC_SLV_3, 4, -1, -1, MSM8916_SLAVE_MPM, MSM8916_SLAVE_SNOC_CFG, MSM8916_SLAVE_RBCPR_CFG, MSM8916_SLAVE_QDSS_CFG, MSM8916_SLAVE_DEHR_CFG);
DEFINE_QNODE(pcnoc_s_4, MSM8916_PNOC_SLV_4, 4, -1, -1, MSM8916_SLAVE_VENUS_CFG, MSM8916_SLAVE_CAMERA_CFG, MSM8916_SLAVE_DISPLAY_CFG);
DEFINE_QNODE(pcnoc_s_8, MSM8916_PNOC_SLV_8, 4, -1, -1, MSM8916_SLAVE_USB_HS, MSM8916_SLAVE_SDCC_1, MSM8916_SLAVE_BLSP_1);
DEFINE_QNODE(pcnoc_s_9, MSM8916_PNOC_SLV_9, 4, -1, -1, MSM8916_SLAVE_SDCC_2, MSM8916_SLAVE_LPASS, MSM8916_SLAVE_GRAPHICS_3D_CFG);
DEFINE_QNODE(pcnoc_snoc_mas, MSM8916_PNOC_SNOC_MAS, 8, 29, -1, MSM8916_PNOC_SNOC_SLV);
DEFINE_QNODE(pcnoc_snoc_slv, MSM8916_PNOC_SNOC_SLV, 8, -1, 45, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC, MSM8916_SNOC_INT_1);
DEFINE_QNODE(qdss_int, MSM8916_SNOC_QDSS_INT, 8, -1, -1, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC);
......
......@@ -499,11 +499,19 @@ static int validate_queue_index(struct hl_device *hdev,
struct asic_fixed_properties *asic = &hdev->asic_prop;
struct hw_queue_properties *hw_queue_prop;
/* This must be checked here to prevent out-of-bounds access to
* hw_queues_props array
*/
if (chunk->queue_index >= HL_MAX_QUEUES) {
dev_err(hdev->dev, "Queue index %d is invalid\n",
chunk->queue_index);
return -EINVAL;
}
hw_queue_prop = &asic->hw_queues_props[chunk->queue_index];
if ((chunk->queue_index >= HL_MAX_QUEUES) ||
(hw_queue_prop->type == QUEUE_TYPE_NA)) {
dev_err(hdev->dev, "Queue index %d is invalid\n",
if (hw_queue_prop->type == QUEUE_TYPE_NA) {
dev_err(hdev->dev, "Queue index %d is not applicable\n",
chunk->queue_index);
return -EINVAL;
}
......
......@@ -36,7 +36,7 @@ static int hl_debugfs_i2c_read(struct hl_device *hdev, u8 i2c_bus, u8 i2c_addr,
pkt.i2c_reg = i2c_reg;
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
HL_DEVICE_TIMEOUT_USEC, (long *) val);
0, (long *) val);
if (rc)
dev_err(hdev->dev, "Failed to read from I2C, error %d\n", rc);
......@@ -63,7 +63,7 @@ static int hl_debugfs_i2c_write(struct hl_device *hdev, u8 i2c_bus, u8 i2c_addr,
pkt.value = cpu_to_le64(val);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
HL_DEVICE_TIMEOUT_USEC, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev, "Failed to write to I2C, error %d\n", rc);
......@@ -87,7 +87,7 @@ static void hl_debugfs_led_set(struct hl_device *hdev, u8 led, u8 state)
pkt.value = cpu_to_le64(state);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
HL_DEVICE_TIMEOUT_USEC, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev, "Failed to set LED %d, error %d\n", led, rc);
......@@ -981,7 +981,7 @@ static ssize_t hl_clk_gate_read(struct file *f, char __user *buf,
if (*ppos)
return 0;
sprintf(tmp_buf, "%d\n", hdev->clock_gating);
sprintf(tmp_buf, "0x%llx\n", hdev->clock_gating_mask);
rc = simple_read_from_buffer(buf, strlen(tmp_buf) + 1, ppos, tmp_buf,
strlen(tmp_buf) + 1);
......@@ -993,7 +993,7 @@ static ssize_t hl_clk_gate_write(struct file *f, const char __user *buf,
{
struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
struct hl_device *hdev = entry->hdev;
u32 value;
u64 value;
ssize_t rc;
if (atomic_read(&hdev->in_reset)) {
......@@ -1002,19 +1002,12 @@ static ssize_t hl_clk_gate_write(struct file *f, const char __user *buf,
return 0;
}
rc = kstrtouint_from_user(buf, count, 10, &value);
rc = kstrtoull_from_user(buf, count, 16, &value);
if (rc)
return rc;
if (value) {
hdev->clock_gating = 1;
if (hdev->asic_funcs->enable_clock_gating)
hdev->asic_funcs->enable_clock_gating(hdev);
} else {
if (hdev->asic_funcs->disable_clock_gating)
hdev->asic_funcs->disable_clock_gating(hdev);
hdev->clock_gating = 0;
}
hdev->clock_gating_mask = value;
hdev->asic_funcs->set_clock_gating(hdev);
return count;
}
......
......@@ -608,7 +608,7 @@ int hl_device_set_debug_mode(struct hl_device *hdev, bool enable)
hdev->in_debug = 0;
if (!hdev->hard_reset_pending)
hdev->asic_funcs->enable_clock_gating(hdev);
hdev->asic_funcs->set_clock_gating(hdev);
goto out;
}
......
......@@ -61,7 +61,7 @@ int hl_fw_send_pci_access_msg(struct hl_device *hdev, u32 opcode)
pkt.ctl = cpu_to_le32(opcode << ARMCP_PKT_CTL_OPCODE_SHIFT);
return hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt,
sizeof(pkt), HL_DEVICE_TIMEOUT_USEC, NULL);
sizeof(pkt), 0, NULL);
}
int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
......@@ -144,7 +144,7 @@ int hl_fw_unmask_irq(struct hl_device *hdev, u16 event_type)
pkt.value = cpu_to_le64(event_type);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
HL_DEVICE_TIMEOUT_USEC, &result);
0, &result);
if (rc)
dev_err(hdev->dev, "failed to unmask RAZWI IRQ %d", event_type);
......@@ -183,7 +183,7 @@ int hl_fw_unmask_irq_arr(struct hl_device *hdev, const u32 *irq_arr,
ARMCP_PKT_CTL_OPCODE_SHIFT);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) pkt,
total_pkt_size, HL_DEVICE_TIMEOUT_USEC, &result);
total_pkt_size, 0, &result);
if (rc)
dev_err(hdev->dev, "failed to unmask IRQ array\n");
......@@ -204,7 +204,7 @@ int hl_fw_test_cpu_queue(struct hl_device *hdev)
test_pkt.value = cpu_to_le64(ARMCP_PACKET_FENCE_VAL);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &test_pkt,
sizeof(test_pkt), HL_DEVICE_TIMEOUT_USEC, &result);
sizeof(test_pkt), 0, &result);
if (!rc) {
if (result != ARMCP_PACKET_FENCE_VAL)
......@@ -248,7 +248,7 @@ int hl_fw_send_heartbeat(struct hl_device *hdev)
hb_pkt.value = cpu_to_le64(ARMCP_PACKET_FENCE_VAL);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &hb_pkt,
sizeof(hb_pkt), HL_DEVICE_TIMEOUT_USEC, &result);
sizeof(hb_pkt), 0, &result);
if ((rc) || (result != ARMCP_PACKET_FENCE_VAL))
rc = -EIO;
......
This diff is collapsed.
......@@ -88,6 +88,7 @@
#define GOYA_PLDM_MMU_TIMEOUT_USEC (MMU_CONFIG_TIMEOUT_USEC * 100)
#define GOYA_PLDM_QMAN0_TIMEOUT_USEC (HL_DEVICE_TIMEOUT_USEC * 30)
#define GOYA_BOOT_FIT_REQ_TIMEOUT_USEC 1000000 /* 1s */
#define GOYA_MSG_TO_CPU_TIMEOUT_USEC 4000000 /* 4s */
#define GOYA_QMAN0_FENCE_VAL 0xD169B243
......@@ -2830,6 +2831,9 @@ int goya_send_cpu_message(struct hl_device *hdev, u32 *msg, u16 len,
return 0;
}
if (!timeout)
timeout = GOYA_MSG_TO_CPU_TIMEOUT_USEC;
return hl_fw_send_cpu_message(hdev, GOYA_QUEUE_ID_CPU_PQ, msg, len,
timeout, result);
}
......@@ -4431,8 +4435,8 @@ static int goya_unmask_irq_arr(struct hl_device *hdev, u32 *irq_arr,
pkt->armcp_pkt.ctl = cpu_to_le32(ARMCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
rc = goya_send_cpu_message(hdev, (u32 *) pkt, total_pkt_size,
HL_DEVICE_TIMEOUT_USEC, &result);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) pkt,
total_pkt_size, 0, &result);
if (rc)
dev_err(hdev->dev, "failed to unmask IRQ array\n");
......@@ -4464,8 +4468,8 @@ static int goya_unmask_irq(struct hl_device *hdev, u16 event_type)
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.value = cpu_to_le64(event_type);
rc = goya_send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
HL_DEVICE_TIMEOUT_USEC, &result);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
0, &result);
if (rc)
dev_err(hdev->dev, "failed to unmask RAZWI IRQ %d", event_type);
......@@ -5028,14 +5032,14 @@ int goya_armcp_info_get(struct hl_device *hdev)
return 0;
}
static void goya_enable_clock_gating(struct hl_device *hdev)
static void goya_set_clock_gating(struct hl_device *hdev)
{
/* clock gating not supported in Goya */
}
static void goya_disable_clock_gating(struct hl_device *hdev)
{
/* clock gating not supported in Goya */
}
static bool goya_is_device_idle(struct hl_device *hdev, u32 *mask,
......@@ -5259,7 +5263,7 @@ static const struct hl_asic_funcs goya_funcs = {
.mmu_invalidate_cache = goya_mmu_invalidate_cache,
.mmu_invalidate_cache_range = goya_mmu_invalidate_cache_range,
.send_heartbeat = goya_send_heartbeat,
.enable_clock_gating = goya_enable_clock_gating,
.set_clock_gating = goya_set_clock_gating,
.disable_clock_gating = goya_disable_clock_gating,
.debug_coresight = goya_debug_coresight,
.is_device_idle = goya_is_device_idle,
......
......@@ -578,8 +578,9 @@ enum hl_pll_frequency {
* @mmu_invalidate_cache_range: flush specific MMU STLB cache lines with
* ASID-VA-size mask.
* @send_heartbeat: send is-alive packet to ArmCP and verify response.
* @enable_clock_gating: enable clock gating for reducing power consumption.
* @disable_clock_gating: disable clock for accessing registers on HBW.
* @set_clock_gating: enable/disable clock gating per engine according to
* clock gating mask in hdev
* @disable_clock_gating: disable clock gating completely
* @debug_coresight: perform certain actions on Coresight for debugging.
* @is_device_idle: return true if device is idle, false otherwise.
* @soft_reset_late_init: perform certain actions needed after soft reset.
......@@ -587,7 +588,11 @@ enum hl_pll_frequency {
* @hw_queues_unlock: release H/W queues lock.
* @get_pci_id: retrieve PCI ID.
* @get_eeprom_data: retrieve EEPROM data from F/W.
* @send_cpu_message: send buffer to ArmCP.
* @send_cpu_message: send message to F/W. If the message is timedout, the
* driver will eventually reset the device. The timeout can
* be determined by the calling function or it can be 0 and
* then the timeout is the default timeout for the specific
* ASIC
* @get_hw_state: retrieve the H/W state
* @pci_bars_map: Map PCI BARs.
* @set_dram_bar_base: Set DRAM BAR to map specific device address. Returns
......@@ -680,7 +685,7 @@ struct hl_asic_funcs {
int (*mmu_invalidate_cache_range)(struct hl_device *hdev, bool is_hard,
u32 asid, u64 va, u64 size);
int (*send_heartbeat)(struct hl_device *hdev);
void (*enable_clock_gating)(struct hl_device *hdev);
void (*set_clock_gating)(struct hl_device *hdev);
void (*disable_clock_gating)(struct hl_device *hdev);
int (*debug_coresight)(struct hl_device *hdev, void *data);
bool (*is_device_idle)(struct hl_device *hdev, u32 *mask,
......@@ -1398,6 +1403,9 @@ struct hl_device_idle_busy_ts {
* @max_power: the max power of the device, as configured by the sysadmin. This
* value is saved so in case of hard-reset, the driver will restore
* this value and update the F/W after the re-initialization
* @clock_gating_mask: is clock gating enabled. bitmask that represents the
* different engines. See debugfs-driver-habanalabs for
* details.
* @in_reset: is device in reset flow.
* @curr_pll_profile: current PLL profile.
* @cs_active_cnt: number of active command submissions on this device (active
......@@ -1425,7 +1433,6 @@ struct hl_device_idle_busy_ts {
* @init_done: is the initialization of the device done.
* @mmu_enable: is MMU enabled.
* @mmu_huge_page_opt: is MMU huge pages optimization enabled.
* @clock_gating: is clock gating enabled.
* @device_cpu_disabled: is the device CPU disabled (due to timeouts)
* @dma_mask: the dma mask that was set for this device
* @in_debug: is device under debug. This, together with fpriv_list, enforces
......@@ -1493,6 +1500,7 @@ struct hl_device {
atomic64_t dram_used_mem;
u64 timeout_jiffies;
u64 max_power;
u64 clock_gating_mask;
atomic_t in_reset;
enum hl_pll_frequency curr_pll_profile;
int cs_active_cnt;
......@@ -1514,7 +1522,6 @@ struct hl_device {
u8 dram_default_page_mapping;
u8 pmmu_huge_range;
u8 init_done;
u8 clock_gating;
u8 device_cpu_disabled;
u8 dma_mask;
u8 in_debug;
......
......@@ -232,7 +232,7 @@ static void set_driver_behavior_per_device(struct hl_device *hdev)
hdev->fw_loading = 1;
hdev->cpu_queues_enable = 1;
hdev->heartbeat = 1;
hdev->clock_gating = 1;
hdev->clock_gating_mask = ULONG_MAX;
hdev->reset_pcilink = 0;
hdev->axi_drain = 0;
......
......@@ -10,7 +10,6 @@
#include <linux/pci.h>
#include <linux/hwmon.h>
#define SENSORS_PKT_TIMEOUT 1000000 /* 1s */
#define HWMON_NR_SENSOR_TYPES (hwmon_pwm + 1)
int hl_build_hwmon_channel_info(struct hl_device *hdev,
......@@ -323,7 +322,7 @@ int hl_get_temperature(struct hl_device *hdev,
pkt.type = __cpu_to_le16(attr);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, value);
0, value);
if (rc) {
dev_err(hdev->dev,
......@@ -350,7 +349,7 @@ int hl_set_temperature(struct hl_device *hdev,
pkt.value = __cpu_to_le64(value);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev,
......@@ -374,7 +373,7 @@ int hl_get_voltage(struct hl_device *hdev,
pkt.type = __cpu_to_le16(attr);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, value);
0, value);
if (rc) {
dev_err(hdev->dev,
......@@ -400,7 +399,7 @@ int hl_get_current(struct hl_device *hdev,
pkt.type = __cpu_to_le16(attr);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, value);
0, value);
if (rc) {
dev_err(hdev->dev,
......@@ -426,7 +425,7 @@ int hl_get_fan_speed(struct hl_device *hdev,
pkt.type = __cpu_to_le16(attr);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, value);
0, value);
if (rc) {
dev_err(hdev->dev,
......@@ -452,7 +451,7 @@ int hl_get_pwm_info(struct hl_device *hdev,
pkt.type = __cpu_to_le16(attr);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, value);
0, value);
if (rc) {
dev_err(hdev->dev,
......@@ -479,7 +478,7 @@ void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
pkt.value = cpu_to_le64(value);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev,
......@@ -502,7 +501,7 @@ int hl_set_voltage(struct hl_device *hdev,
pkt.value = __cpu_to_le64(value);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev,
......@@ -527,7 +526,7 @@ int hl_set_current(struct hl_device *hdev,
pkt.value = __cpu_to_le64(value);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev,
......
......@@ -9,9 +9,6 @@
#include <linux/pci.h>
#define SET_CLK_PKT_TIMEOUT 1000000 /* 1s */
#define SET_PWR_PKT_TIMEOUT 1000000 /* 1s */
long hl_get_frequency(struct hl_device *hdev, u32 pll_index, bool curr)
{
struct armcp_packet pkt;
......@@ -29,7 +26,7 @@ long hl_get_frequency(struct hl_device *hdev, u32 pll_index, bool curr)
pkt.pll_index = cpu_to_le32(pll_index);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SET_CLK_PKT_TIMEOUT, &result);
0, &result);
if (rc) {
dev_err(hdev->dev,
......@@ -54,7 +51,7 @@ void hl_set_frequency(struct hl_device *hdev, u32 pll_index, u64 freq)
pkt.value = cpu_to_le64(freq);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SET_CLK_PKT_TIMEOUT, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev,
......@@ -74,7 +71,7 @@ u64 hl_get_max_power(struct hl_device *hdev)
ARMCP_PKT_CTL_OPCODE_SHIFT);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SET_PWR_PKT_TIMEOUT, &result);
0, &result);
if (rc) {
dev_err(hdev->dev, "Failed to get max power, error %d\n", rc);
......@@ -96,7 +93,7 @@ void hl_set_max_power(struct hl_device *hdev, u64 value)
pkt.value = cpu_to_le64(value);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SET_PWR_PKT_TIMEOUT, NULL);
0, NULL);
if (rc)
dev_err(hdev->dev, "Failed to set max power, error %d\n", rc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment