Skip to content

L
linux
Commit 1aded58a authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Boris Brezillon
Browse files
Options

mtd: nand: denali: consolidate INTR_STATUS__* and INTR_EN__* macros 

The interrupts are enabled by INTR_EN register, then asserted
interrupts can be observed via INTR_STATUS register.

The bit fields are identical between INTR_EN and INTR_STATUS, so we
can merge the bit field macros.  Likewise for DATA_INTR.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
parent 60ca41f1
Hide whitespace changes
Inline Side-by-side
Showing with 44 additions and 73 deletions
drivers/mtd/nand/denali.c
View file @ 1aded58a
......@@ -45,16 +45,16 @@ MODULE_PARM_DESC(onfi_timing_mode,
* We define a macro here that combines all interrupts this driver uses into
* a single constant value, for convenience.
*/
#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \
INTR_STATUS__ECC_TRANSACTION_DONE | \
INTR_STATUS__ECC_ERR | \
INTR_STATUS__PROGRAM_FAIL | \
INTR_STATUS__LOAD_COMP | \
INTR_STATUS__PROGRAM_COMP | \
INTR_STATUS__TIME_OUT | \
INTR_STATUS__ERASE_FAIL | \
INTR_STATUS__RST_COMP | \
INTR_STATUS__ERASE_COMP)
#define DENALI_IRQ_ALL (INTR__DMA_CMD_COMP | \
INTR__ECC_TRANSACTION_DONE | \
INTR__ECC_ERR | \
INTR__PROGRAM_FAIL | \
INTR__LOAD_COMP | \
INTR__PROGRAM_COMP | \
INTR__TIME_OUT | \
INTR__ERASE_FAIL | \
INTR__RST_COMP | \
INTR__ERASE_COMP)
/*
* indicates whether or not the internal value for the flash bank is
......@@ -159,7 +159,7 @@ static void read_status(struct denali_nand_info *denali)
static void reset_bank(struct denali_nand_info *denali)
{
uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT;
uint32_t irq_mask = INTR__RST_COMP | INTR__TIME_OUT;
clear_interrupts(denali);
......@@ -167,7 +167,7 @@ static void reset_bank(struct denali_nand_info *denali)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status & INTR_STATUS__TIME_OUT)
if (irq_status & INTR__TIME_OUT)
dev_err(denali->dev, "reset bank failed.\n");
}
......@@ -177,22 +177,22 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
int i;
for (i = 0; i < denali->max_banks; i++)
iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
denali->flash_reg + INTR_STATUS(i));
for (i = 0; i < denali->max_banks; i++) {
iowrite32(1 << i, denali->flash_reg + DEVICE_RESET);
while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) &
(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT)))
(INTR__RST_COMP | INTR__TIME_OUT)))
cpu_relax();
if (ioread32(denali->flash_reg + INTR_STATUS(i)) &
INTR_STATUS__TIME_OUT)
INTR__TIME_OUT)
dev_dbg(denali->dev,
"NAND Reset operation timed out on bank %d\n", i);
}
for (i = 0; i < denali->max_banks; i++)
iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
denali->flash_reg + INTR_STATUS(i));
return PASS;
......@@ -716,7 +716,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
uint32_t addr, cmd, irq_status, irq_mask;
if (op == DENALI_READ)
irq_mask = INTR_STATUS__LOAD_COMP;
irq_mask = INTR__LOAD_COMP;
else if (op == DENALI_WRITE)
irq_mask = 0;
else
......@@ -823,8 +823,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP |
INTR_STATUS__PROGRAM_FAIL;
uint32_t irq_mask = INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL;
int status = 0;
denali->page = page;
......@@ -851,7 +850,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_mask = INTR_STATUS__LOAD_COMP;
uint32_t irq_mask = INTR__LOAD_COMP;
uint32_t irq_status, addr, cmd;
denali->page = page;
......@@ -912,7 +911,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
bool check_erased_page = false;
unsigned int bitflips = 0;
if (irq_status & INTR_STATUS__ECC_ERR) {
if (irq_status & INTR__ECC_ERR) {
/* read the ECC errors. we'll ignore them for now */
uint32_t err_address, err_correction_info, err_byte,
err_sector, err_device, err_correction_value;
......@@ -969,7 +968,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
* for a while for this interrupt
*/
while (!(read_interrupt_status(denali) &
INTR_STATUS__ECC_TRANSACTION_DONE))
INTR__ECC_TRANSACTION_DONE))
cpu_relax();
clear_interrupts(denali);
denali_set_intr_modes(denali, true);
......@@ -1020,8 +1019,7 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
dma_addr_t addr = denali->buf.dma_buf;
size_t size = mtd->writesize + mtd->oobsize;
uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP |
INTR_STATUS__PROGRAM_FAIL;
uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
/*
* if it is a raw xfer, we want to disable ecc and send the spare area.
......@@ -1119,8 +1117,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
size_t size = mtd->writesize + mtd->oobsize;
uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE |
INTR_STATUS__ECC_ERR;
uint32_t irq_mask = INTR__ECC_TRANSACTION_DONE | INTR__ECC_ERR;
bool check_erased_page = false;
if (page != denali->page) {
......@@ -1168,7 +1165,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
struct denali_nand_info *denali = mtd_to_denali(mtd);
dma_addr_t addr = denali->buf.dma_buf;
size_t size = mtd->writesize + mtd->oobsize;
uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP;
uint32_t irq_mask = INTR__DMA_CMD_COMP;
if (page != denali->page) {
dev_err(denali->dev,
......@@ -1241,10 +1238,9 @@ static int denali_erase(struct mtd_info *mtd, int page)
index_addr(denali, cmd, 0x1);
/* wait for erase to complete or failure to occur */
irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
INTR_STATUS__ERASE_FAIL);
irq_status = wait_for_irq(denali, INTR__ERASE_COMP | INTR__ERASE_FAIL);
return irq_status & INTR_STATUS__ERASE_FAIL ? NAND_STATUS_FAIL : PASS;
return irq_status & INTR__ERASE_FAIL ? NAND_STATUS_FAIL : PASS;
}
static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
......
drivers/mtd/nand/denali.h
View file @ 1aded58a
......@@ -218,40 +218,22 @@
#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50))
#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50))
#define INTR_STATUS__ECC_TRANSACTION_DONE 0x0001
#define INTR_STATUS__ECC_ERR 0x0002
#define INTR_STATUS__DMA_CMD_COMP 0x0004
#define INTR_STATUS__TIME_OUT 0x0008
#define INTR_STATUS__PROGRAM_FAIL 0x0010
#define INTR_STATUS__ERASE_FAIL 0x0020
#define INTR_STATUS__LOAD_COMP 0x0040
#define INTR_STATUS__PROGRAM_COMP 0x0080
#define INTR_STATUS__ERASE_COMP 0x0100
#define INTR_STATUS__PIPE_CPYBCK_CMD_COMP 0x0200
#define INTR_STATUS__LOCKED_BLK 0x0400
#define INTR_STATUS__UNSUP_CMD 0x0800
#define INTR_STATUS__INT_ACT 0x1000
#define INTR_STATUS__RST_COMP 0x2000
#define INTR_STATUS__PIPE_CMD_ERR 0x4000
#define INTR_STATUS__PAGE_XFER_INC 0x8000
#define INTR_EN__ECC_TRANSACTION_DONE 0x0001
#define INTR_EN__ECC_ERR 0x0002
#define INTR_EN__DMA_CMD_COMP 0x0004
#define INTR_EN__TIME_OUT 0x0008
#define INTR_EN__PROGRAM_FAIL 0x0010
#define INTR_EN__ERASE_FAIL 0x0020
#define INTR_EN__LOAD_COMP 0x0040
#define INTR_EN__PROGRAM_COMP 0x0080
#define INTR_EN__ERASE_COMP 0x0100
#define INTR_EN__PIPE_CPYBCK_CMD_COMP 0x0200
#define INTR_EN__LOCKED_BLK 0x0400
#define INTR_EN__UNSUP_CMD 0x0800
#define INTR_EN__INT_ACT 0x1000
#define INTR_EN__RST_COMP 0x2000
#define INTR_EN__PIPE_CMD_ERR 0x4000
#define INTR_EN__PAGE_XFER_INC 0x8000
#define INTR__ECC_TRANSACTION_DONE 0x0001
#define INTR__ECC_ERR 0x0002
#define INTR__DMA_CMD_COMP 0x0004
#define INTR__TIME_OUT 0x0008
#define INTR__PROGRAM_FAIL 0x0010
#define INTR__ERASE_FAIL 0x0020
#define INTR__LOAD_COMP 0x0040
#define INTR__PROGRAM_COMP 0x0080
#define INTR__ERASE_COMP 0x0100
#define INTR__PIPE_CPYBCK_CMD_COMP 0x0200
#define INTR__LOCKED_BLK 0x0400
#define INTR__UNSUP_CMD 0x0800
#define INTR__INT_ACT 0x1000
#define INTR__RST_COMP 0x2000
#define INTR__PIPE_CMD_ERR 0x4000
#define INTR__PAGE_XFER_INC 0x8000
#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50))
#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50))
......@@ -284,20 +266,13 @@
#define IGNORE_ECC_DONE__FLAG 0x0001
#define DMA_INTR 0x720
#define DMA_INTR_EN 0x730
#define DMA_INTR__TARGET_ERROR 0x0001
#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002
#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004
#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008
#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010
#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020
#define DMA_INTR_EN 0x730
#define DMA_INTR_EN__TARGET_ERROR 0x0001
#define DMA_INTR_EN__DESC_COMP_CHANNEL0 0x0002
#define DMA_INTR_EN__DESC_COMP_CHANNEL1 0x0004
#define DMA_INTR_EN__DESC_COMP_CHANNEL2 0x0008
#define DMA_INTR_EN__DESC_COMP_CHANNEL3 0x0010
#define DMA_INTR_EN__MEMCOPY_DESC_COMP 0x0020
#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020
#define TARGET_ERR_ADDR_LO 0x740
#define TARGET_ERR_ADDR_LO__VALUE 0xffff
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7