x86, intel-mid: remove Intel MID specific serial support

Since we have a native 8250 driver carrying the Intel MID serial devices the
specific support is not needed anymore. This patch removes it for Intel MID.

Note that the console device name is changed from ttyMFDx to ttySx.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/x86/Kconfig.debug

@@ -43,10 +43,6 @@ config EARLY_PRINTK
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
-config EARLY_PRINTK_INTEL_MID
-	bool "Early printk for Intel MID platform support"
-	depends on EARLY_PRINTK && X86_INTEL_MID
-
 config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	depends on EARLY_PRINTK && PCI

arch/x86/include/asm/intel-mid.h

@@ -136,9 +136,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
-extern struct console early_hsu_console;
-extern void hsu_early_console_init(const char *);
-
 extern void intel_scu_devices_create(void);
 extern void intel_scu_devices_destroy(void);
 

arch/x86/kernel/early_printk.c

@@ -375,12 +375,6 @@ static int __init setup_early_printk(char *buf)
 		if (!strncmp(buf, "xen", 3))
 			early_console_register(&xenboot_console, keep);
 #endif
-#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
-		if (!strncmp(buf, "hsu", 3)) {
-			hsu_early_console_init(buf + 3);
-			early_console_register(&early_hsu_console, keep);
-		}
-#endif
 #ifdef CONFIG_EARLY_PRINTK_EFI
 		if (!strncmp(buf, "efi", 3))
 			early_console_register(&early_efi_console, keep);

arch/x86/platform/intel-mid/Makefile

 obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
 
 # SFI specific code
 ifdef CONFIG_X86_INTEL_MID

arch/x86/platform/intel-mid/early_printk_intel_mid.c

-/*
- * early_printk_intel_mid.c - early consoles for Intel MID platforms
- *
- * Copyright (c) 2008-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/*
- * This file implements early console named hsu.
- * hsu is based on a High Speed UART device which only exists in the Medfield
- * platform
- */
-
-#include <linux/serial_reg.h>
-#include <linux/serial_mfd.h>
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/intel-mid.h>
-
-/*
- * Following is the early console based on Medfield HSU (High
- * Speed UART) device.
- */
-#define HSU_PORT_BASE		0xffa28080
-
-static void __iomem *phsu;
-
-void hsu_early_console_init(const char *s)
-{
-	unsigned long paddr, port = 0;
-	u8 lcr;
-
-	/*
-	 * Select the early HSU console port if specified by user in the
-	 * kernel command line.
-	 */
-	if (*s && !kstrtoul(s, 10, &port))
-		port = clamp_val(port, 0, 2);
-
-	paddr = HSU_PORT_BASE + port * 0x80;
-	phsu = (void __iomem *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
-
-	/* Disable FIFO */
-	writeb(0x0, phsu + UART_FCR);
-
-	/* Set to default 115200 bps, 8n1 */
-	lcr = readb(phsu + UART_LCR);
-	writeb((0x80 | lcr), phsu + UART_LCR);
-	writeb(0x18, phsu + UART_DLL);
-	writeb(lcr,  phsu + UART_LCR);
-	writel(0x3600, phsu + UART_MUL*4);
-
-	writeb(0x8, phsu + UART_MCR);
-	writeb(0x7, phsu + UART_FCR);
-	writeb(0x3, phsu + UART_LCR);
-
-	/* Clear IRQ status */
-	readb(phsu + UART_LSR);
-	readb(phsu + UART_RX);
-	readb(phsu + UART_IIR);
-	readb(phsu + UART_MSR);
-
-	/* Enable FIFO */
-	writeb(0x7, phsu + UART_FCR);
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void early_hsu_putc(char ch)
-{
-	unsigned int timeout = 10000; /* 10ms */
-	u8 status;
-
-	while (--timeout) {
-		status = readb(phsu + UART_LSR);
-		if (status & BOTH_EMPTY)
-			break;
-		udelay(1);
-	}
-
-	/* Only write the char when there was no timeout */
-	if (timeout)
-		writeb(ch, phsu + UART_TX);
-}
-
-static void early_hsu_write(struct console *con, const char *str, unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_hsu_putc('\r');
-		early_hsu_putc(*str);
-		str++;
-	}
-}
-
-struct console early_hsu_console = {
-	.name =		"earlyhsu",
-	.write =	early_hsu_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};

drivers/tty/serial/Kconfig

@@ -483,16 +483,6 @@ config SERIAL_SA1100_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-config SERIAL_MFD_HSU
-	tristate "Medfield High Speed UART support"
-	depends on PCI
-	select SERIAL_CORE
-
-config SERIAL_MFD_HSU_CONSOLE
-	bool "Medfield HSU serial console support"
-	depends on SERIAL_MFD_HSU=y
-	select SERIAL_CORE_CONSOLE
-
 config SERIAL_BFIN
 	tristate "Blackfin serial port support"
 	depends on BLACKFIN

drivers/tty/serial/Makefile

@@ -78,7 +78,6 @@ obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
 obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
 obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
 obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
-obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
 obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o

include/linux/serial_mfd.h

-#ifndef _SERIAL_MFD_H_
-#define _SERIAL_MFD_H_
-
-/* HW register offset definition */
-#define UART_FOR	0x08
-#define UART_PS		0x0C
-#define UART_MUL	0x0D
-#define UART_DIV	0x0E
-
-#define HSU_GBL_IEN	0x0
-#define HSU_GBL_IST	0x4
-
-#define HSU_GBL_INT_BIT_PORT0	0x0
-#define HSU_GBL_INT_BIT_PORT1	0x1
-#define HSU_GBL_INT_BIT_PORT2	0x2
-#define HSU_GBL_INT_BIT_IRI	0x3
-#define HSU_GBL_INT_BIT_HDLC	0x4
-#define HSU_GBL_INT_BIT_DMA	0x5
-
-#define HSU_GBL_ISR	0x8
-#define HSU_GBL_DMASR	0x400
-#define HSU_GBL_DMAISR	0x404
-
-#define HSU_PORT_REG_OFFSET	0x80
-#define HSU_PORT0_REG_OFFSET	0x80
-#define HSU_PORT1_REG_OFFSET	0x100
-#define HSU_PORT2_REG_OFFSET	0x180
-#define HSU_PORT_REG_LENGTH	0x80
-
-#define HSU_DMA_CHANS_REG_OFFSET	0x500
-#define HSU_DMA_CHANS_REG_LENGTH	0x40
-
-#define HSU_CH_SR		0x0	/* channel status reg */
-#define HSU_CH_CR		0x4	/* control reg */
-#define HSU_CH_DCR		0x8	/* descriptor control reg */
-#define HSU_CH_BSR		0x10	/* max fifo buffer size reg */
-#define HSU_CH_MOTSR		0x14	/* minimum ocp transfer size */
-#define HSU_CH_D0SAR		0x20	/* desc 0 start addr */
-#define HSU_CH_D0TSR		0x24	/* desc 0 transfer size */
-#define HSU_CH_D1SAR		0x28
-#define HSU_CH_D1TSR		0x2C
-#define HSU_CH_D2SAR		0x30
-#define HSU_CH_D2TSR		0x34
-#define HSU_CH_D3SAR		0x38
-#define HSU_CH_D3TSR		0x3C
-
-#endif

include/uapi/linux/serial_reg.h

@@ -241,25 +241,6 @@
 #define UART_FCR_PXAR16	0x80	/* receive FIFO threshold = 16 */
 #define UART_FCR_PXAR32	0xc0	/* receive FIFO threshold = 32 */
 
-/*
- * Intel MID on-chip HSU (High Speed UART) defined bits
- */
-#define UART_FCR_HSU_64_1B	0x00	/* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_64_16B	0x40	/* receive FIFO treshold = 16 */
-#define UART_FCR_HSU_64_32B	0x80	/* receive FIFO treshold = 32 */
-#define UART_FCR_HSU_64_56B	0xc0	/* receive FIFO treshold = 56 */
-
-#define UART_FCR_HSU_16_1B	0x00	/* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_16_4B	0x40	/* receive FIFO treshold = 4 */
-#define UART_FCR_HSU_16_8B	0x80	/* receive FIFO treshold = 8 */
-#define UART_FCR_HSU_16_14B	0xc0	/* receive FIFO treshold = 14 */
-
-#define UART_FCR_HSU_64B_FIFO	0x20	/* chose 64 bytes FIFO */
-#define UART_FCR_HSU_16B_FIFO	0x00	/* chose 16 bytes FIFO */
-
-#define UART_FCR_HALF_EMPT_TXI	0x00	/* trigger TX_EMPT IRQ for half empty */
-#define UART_FCR_FULL_EMPT_TXI	0x08	/* trigger TX_EMPT IRQ for full empty */
-
 /*
  * These register definitions are for the 16C950
  */