[Blackfin] arch: boards and machines defconfig updates

Signed-off-by: Bryan Wu <cooloney@kernel.org>

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -250,7 +250,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MEM_ADD_WIDTH=10
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
@@ -720,8 +720,8 @@ CONFIG_BFIN_OTP=y
 #
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
-CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -212,7 +212,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=32
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -212,7 +212,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=128
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MEM_ADD_WIDTH=11
 CONFIG_ENET_FLASH_PIN=0
 CONFIG_BOOT_LOAD=0x1000

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -220,7 +220,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MEM_ADD_WIDTH=10
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -285,7 +285,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=512
 # CONFIG_MEM_MT46V32M16_6T is not set
 CONFIG_MEM_MT46V32M16_5B=y
 CONFIG_BOOT_LOAD=0x1000
@@ -813,8 +813,8 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
-CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -256,7 +256,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y

arch/blackfin/configs/CM-BF533_defconfig

@@ -210,7 +210,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=32
+CONFIG_MAX_MEM_SIZE=32
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y

arch/blackfin/configs/CM-BF537E_defconfig

@@ -218,7 +218,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=32
+CONFIG_MAX_MEM_SIZE=32
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y

arch/blackfin/configs/CM-BF537U_defconfig

@@ -218,7 +218,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=32
+CONFIG_MAX_MEM_SIZE=32
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y

arch/blackfin/configs/H8606_defconfig

@@ -207,7 +207,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=32
+CONFIG_MAX_MEM_SIZE=32
 CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y

arch/blackfin/configs/PNAV-10_defconfig

@@ -214,7 +214,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=64
 CONFIG_MEM_ADD_WIDTH=10
 CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y