Commit 1bfa11db authored by Jaswinder Singh Rajput's avatar Jaswinder Singh Rajput Committed by James Bottomley

[SCSI] qla1280: use request_firmware

Firmware blob is little endian looks like this...
        unsigned char  Version1
        unsigned char  Version2
        unsigned char  Version3
        unsigned char  Padding
        unsigned short start_address
	unsigned short data
Signed-off-by: default avatarJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent fd6e1c14
This source diff could not be displayed because it is too large. You can view the blob instead.
This source diff could not be displayed because it is too large. You can view the blob instead.
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -348,6 +348,7 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/firmware.h>
#include <asm/io.h>
#include <asm/irq.h>
......@@ -384,11 +385,7 @@
#define MEMORY_MAPPED_IO 1
#endif
#define UNIQUE_FW_NAME
#include "qla1280.h"
#include "ql12160_fw.h" /* ISP RISC codes */
#include "ql1280_fw.h"
#include "ql1040_fw.h"
#ifndef BITS_PER_LONG
#error "BITS_PER_LONG not defined!"
......@@ -541,10 +538,7 @@ __setup("qla1280=", qla1280_setup);
struct qla_boards {
unsigned char name[9]; /* Board ID String */
int numPorts; /* Number of SCSI ports */
unsigned short *fwcode; /* pointer to FW array */
unsigned short *fwlen; /* number of words in array */
unsigned short *fwstart; /* start address for F/W */
unsigned char *fwver; /* Ptr to F/W version array */
char *fwname; /* firmware name */
};
/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
......@@ -567,19 +561,13 @@ MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
static struct qla_boards ql1280_board_tbl[] = {
/* Name , Number of ports, FW details */
{"QLA12160", 2, &fw12160i_code01[0], &fw12160i_length01,
&fw12160i_addr01, &fw12160i_version_str[0]},
{"QLA1040", 1, &risc_code01[0], &risc_code_length01,
&risc_code_addr01, &firmware_version[0]},
{"QLA1080", 1, &fw1280ei_code01[0], &fw1280ei_length01,
&fw1280ei_addr01, &fw1280ei_version_str[0]},
{"QLA1240", 2, &fw1280ei_code01[0], &fw1280ei_length01,
&fw1280ei_addr01, &fw1280ei_version_str[0]},
{"QLA1280", 2, &fw1280ei_code01[0], &fw1280ei_length01,
&fw1280ei_addr01, &fw1280ei_version_str[0]},
{"QLA10160", 1, &fw12160i_code01[0], &fw12160i_length01,
&fw12160i_addr01, &fw12160i_version_str[0]},
{" ", 0}
{"QLA12160", 2, "qlogic/12160.bin"},
{"QLA1040", 1, "qlogic/1040.bin"},
{"QLA1080", 1, "qlogic/1280.bin"},
{"QLA1240", 2, "qlogic/1280.bin"},
{"QLA1280", 2, "qlogic/1280.bin"},
{"QLA10160", 1, "qlogic/12160.bin"},
{" ", 0, " "},
};
static int qla1280_verbose = 1;
......@@ -704,7 +692,7 @@ qla1280_info(struct Scsi_Host *host)
sprintf (bp,
"QLogic %s PCI to SCSI Host Adapter\n"
" Firmware version: %2d.%02d.%02d, Driver version %s",
&bdp->name[0], bdp->fwver[0], bdp->fwver[1], bdp->fwver[2],
&bdp->name[0], ha->fwver1, ha->fwver2, ha->fwver3,
QLA1280_VERSION);
return bp;
}
......@@ -1648,36 +1636,60 @@ qla1280_chip_diag(struct scsi_qla_host *ha)
static int
qla1280_load_firmware_pio(struct scsi_qla_host *ha)
{
uint16_t risc_address, *risc_code_address, risc_code_size;
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
uint16_t mb[MAILBOX_REGISTER_COUNT], i;
int err;
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
return err;
}
if ((fw->size % 2) || (fw->size < 6)) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, ql1280_board_tbl[ha->devnum].fwname);
err = -EINVAL;
goto out;
}
ha->fwver1 = fw->data[0];
ha->fwver2 = fw->data[1];
ha->fwver3 = fw->data[2];
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
/* Load RISC code. */
risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
risc_address = ha->fwstart;
fw_data = (const __le16 *)&fw->data[4];
risc_code_size = (fw->size - 6) / 2;
for (i = 0; i < risc_code_size; i++) {
mb[0] = MBC_WRITE_RAM_WORD;
mb[1] = risc_address + i;
mb[2] = risc_code_address[i];
mb[2] = __le16_to_cpu(fw_data[i]);
err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
if (err) {
printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
ha->host_no);
return err;
goto out;
}
}
return 0;
out:
release_firmware(fw);
return err;
}
#define DUMP_IT_BACK 0 /* for debug of RISC loading */
static int
qla1280_load_firmware_dma(struct scsi_qla_host *ha)
{
uint16_t risc_address, *risc_code_address, risc_code_size;
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
int err = 0, num, i;
#if DUMP_IT_BACK
......@@ -1689,10 +1701,29 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
return -ENOMEM;
#endif
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
return err;
}
if ((fw->size % 2) || (fw->size < 6)) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, ql1280_board_tbl[ha->devnum].fwname);
err = -EINVAL;
goto out;
}
ha->fwver1 = fw->data[0];
ha->fwver2 = fw->data[1];
ha->fwver3 = fw->data[2];
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
/* Load RISC code. */
risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
risc_address = ha->fwstart;
fw_data = (const __le16 *)&fw->data[4];
risc_code_size = (fw->size - 6) / 2;
dprintk(1, "%s: DMA RISC code (%i) words\n",
__func__, risc_code_size);
......@@ -1708,10 +1739,9 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p),"
"%d,%d(0x%x)\n",
risc_code_address, cnt, num, risc_address);
fw_data, cnt, num, risc_address);
for(i = 0; i < cnt; i++)
((__le16 *)ha->request_ring)[i] =
cpu_to_le16(risc_code_address[i]);
((__le16 *)ha->request_ring)[i] = fw_data[i];
mb[0] = MBC_LOAD_RAM;
mb[1] = risc_address;
......@@ -1763,7 +1793,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
#endif
risc_address += cnt;
risc_code_size = risc_code_size - cnt;
risc_code_address = risc_code_address + cnt;
fw_data = fw_data + cnt;
num++;
}
......@@ -1771,6 +1801,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
#if DUMP_IT_BACK
pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
#endif
release_firmware(fw);
return err;
}
......@@ -1786,7 +1817,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
/* Verify checksum of loaded RISC code. */
mb[0] = MBC_VERIFY_CHECKSUM;
/* mb[1] = ql12_risc_code_addr01; */
mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
mb[1] = ha->fwstart;
err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
if (err) {
printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
......@@ -1796,7 +1827,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
/* Start firmware execution. */
dprintk(1, "%s: start firmware running.\n", __func__);
mb[0] = MBC_EXECUTE_FIRMWARE;
mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
mb[1] = ha->fwstart;
err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
if (err) {
printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
......@@ -4450,6 +4481,9 @@ module_exit(qla1280_exit);
MODULE_AUTHOR("Qlogic & Jes Sorensen");
MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("qlogic/1040.bin");
MODULE_FIRMWARE("qlogic/1280.bin");
MODULE_FIRMWARE("qlogic/12160.bin");
MODULE_VERSION(QLA1280_VERSION);
/*
......
......@@ -1069,6 +1069,12 @@ struct scsi_qla_host {
struct nvram nvram;
int nvram_valid;
/* Firmware Info */
unsigned short fwstart; /* start address for F/W */
unsigned char fwver1; /* F/W version first char */
unsigned char fwver2; /* F/W version second char */
unsigned char fwver3; /* F/W version third char */
};
#endif /* _QLA1280_H */
......@@ -41,6 +41,8 @@ fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
......
......@@ -45,6 +45,19 @@ Found alsa-firmware package in hex form, with the following comment:
--------------------------------------------------------------------------
Driver: SCSI_QLOGIC_1280 - Qlogic QLA 1240/1x80/1x160 SCSI support
File: qlogic/1040.bin
File: qlogic/1280.bin
File: qlogic/12160.bin
Licence: Allegedly GPLv2+, but no source visible. Marked:
QLOGIC LINUX SOFTWARE
QLogic ISP1280/ device driver for Linux 2.2.x and 2.4.x
Copyright (C) 2001 Qlogic Corporation (www.qlogic.com)
--------------------------------------------------------------------------
Driver: smctr -- SMC ISA/MCA Token Ring adapter
File: tr_smctr.bin
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment