arm64: mte: Allow user control of the tag check mode via prctl()

By default, even if PROT_MTE is set on a memory range, there is no tag
check fault reporting (SIGSEGV). Introduce a set of option to the
exiting prctl(PR_SET_TAGGED_ADDR_CTRL) to allow user control of the tag
check fault mode:

  PR_MTE_TCF_NONE  - no reporting (default)
  PR_MTE_TCF_SYNC  - synchronous tag check fault reporting
  PR_MTE_TCF_ASYNC - asynchronous tag check fault reporting

These options translate into the corresponding SCTLR_EL1.TCF0 bitfield,
context-switched by the kernel. Note that the kernel accesses to the
user address space (e.g. read() system call) are not checked if the user
thread tag checking mode is PR_MTE_TCF_NONE or PR_MTE_TCF_ASYNC. If the
tag checking mode is PR_MTE_TCF_SYNC, the kernel makes a best effort to
check its user address accesses, however it cannot always guarantee it.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>

arch/arm64/include/asm/mte.h

@@ -21,6 +21,9 @@ void mte_clear_page_tags(void *addr);
 void mte_sync_tags(pte_t *ptep, pte_t pte);
 void mte_copy_page_tags(void *kto, const void *kfrom);
 void flush_mte_state(void);
+void mte_thread_switch(struct task_struct *next);
+long set_mte_ctrl(unsigned long arg);
+long get_mte_ctrl(void);
 
 #else
 
@@ -36,6 +39,17 @@ static inline void mte_copy_page_tags(void *kto, const void *kfrom)
 static inline void flush_mte_state(void)
 {
 }
+static inline void mte_thread_switch(struct task_struct *next)
+{
+}
+static inline long set_mte_ctrl(unsigned long arg)
+{
+	return 0;
+}
+static inline long get_mte_ctrl(void)
+{
+	return 0;
+}
 
 #endif
 

arch/arm64/include/asm/processor.h

@@ -151,6 +151,9 @@ struct thread_struct {
 	struct ptrauth_keys_user	keys_user;
 	struct ptrauth_keys_kernel	keys_kernel;
 #endif
+#ifdef CONFIG_ARM64_MTE
+	u64			sctlr_tcf0;
+#endif
 };
 
 static inline void arch_thread_struct_whitelist(unsigned long *offset,

arch/arm64/kernel/mte.c

@@ -5,6 +5,8 @@
 
 #include <linux/bitops.h>
 #include <linux/mm.h>
+#include <linux/prctl.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/thread_info.h>
 
@@ -49,6 +51,26 @@ int memcmp_pages(struct page *page1, struct page *page2)
 	return ret;
 }
 
+static void update_sctlr_el1_tcf0(u64 tcf0)
+{
+	/* ISB required for the kernel uaccess routines */
+	sysreg_clear_set(sctlr_el1, SCTLR_EL1_TCF0_MASK, tcf0);
+	isb();
+}
+
+static void set_sctlr_el1_tcf0(u64 tcf0)
+{
+	/*
+	 * mte_thread_switch() checks current->thread.sctlr_tcf0 as an
+	 * optimisation. Disable preemption so that it does not see
+	 * the variable update before the SCTLR_EL1.TCF0 one.
+	 */
+	preempt_disable();
+	current->thread.sctlr_tcf0 = tcf0;
+	update_sctlr_el1_tcf0(tcf0);
+	preempt_enable();
+}
+
 void flush_mte_state(void)
 {
 	if (!system_supports_mte())
@@ -58,4 +80,59 @@ void flush_mte_state(void)
 	dsb(ish);
 	write_sysreg_s(0, SYS_TFSRE0_EL1);
 	clear_thread_flag(TIF_MTE_ASYNC_FAULT);
+	/* disable tag checking */
+	set_sctlr_el1_tcf0(SCTLR_EL1_TCF0_NONE);
+}
+
+void mte_thread_switch(struct task_struct *next)
+{
+	if (!system_supports_mte())
+		return;
+
+	/* avoid expensive SCTLR_EL1 accesses if no change */
+	if (current->thread.sctlr_tcf0 != next->thread.sctlr_tcf0)
+		update_sctlr_el1_tcf0(next->thread.sctlr_tcf0);
+}
+
+long set_mte_ctrl(unsigned long arg)
+{
+	u64 tcf0;
+
+	if (!system_supports_mte())
+		return 0;
+
+	switch (arg & PR_MTE_TCF_MASK) {
+	case PR_MTE_TCF_NONE:
+		tcf0 = SCTLR_EL1_TCF0_NONE;
+		break;
+	case PR_MTE_TCF_SYNC:
+		tcf0 = SCTLR_EL1_TCF0_SYNC;
+		break;
+	case PR_MTE_TCF_ASYNC:
+		tcf0 = SCTLR_EL1_TCF0_ASYNC;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	set_sctlr_el1_tcf0(tcf0);
+
+	return 0;
+}
+
+long get_mte_ctrl(void)
+{
+	if (!system_supports_mte())
+		return 0;
+
+	switch (current->thread.sctlr_tcf0) {
+	case SCTLR_EL1_TCF0_NONE:
+		return PR_MTE_TCF_NONE;
+	case SCTLR_EL1_TCF0_SYNC:
+		return PR_MTE_TCF_SYNC;
+	case SCTLR_EL1_TCF0_ASYNC:
+		return PR_MTE_TCF_ASYNC;
+	}
+
+	return 0;
 }

arch/arm64/kernel/process.c

@@ -577,6 +577,13 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
 	 */
 	dsb(ish);
 
+	/*
+	 * MTE thread switching must happen after the DSB above to ensure that
+	 * any asynchronous tag check faults have been logged in the TFSR*_EL1
+	 * registers.
+	 */
+	mte_thread_switch(next);
+
 	/* the actual thread switch */
 	last = cpu_switch_to(prev, next);
 
@@ -636,9 +643,15 @@ static unsigned int tagged_addr_disabled;
 
 long set_tagged_addr_ctrl(unsigned long arg)
 {
+	unsigned long valid_mask = PR_TAGGED_ADDR_ENABLE;
+
 	if (is_compat_task())
 		return -EINVAL;
-	if (arg & ~PR_TAGGED_ADDR_ENABLE)
+
+	if (system_supports_mte())
+		valid_mask |= PR_MTE_TCF_MASK;
+
+	if (arg & ~valid_mask)
 		return -EINVAL;
 
 	/*
@@ -648,6 +661,9 @@ long set_tagged_addr_ctrl(unsigned long arg)
 	if (arg & PR_TAGGED_ADDR_ENABLE && tagged_addr_disabled)
 		return -EINVAL;
 
+	if (set_mte_ctrl(arg) != 0)
+		return -EINVAL;
+
 	update_thread_flag(TIF_TAGGED_ADDR, arg & PR_TAGGED_ADDR_ENABLE);
 
 	return 0;
@@ -655,13 +671,17 @@ long set_tagged_addr_ctrl(unsigned long arg)
 
 long get_tagged_addr_ctrl(void)
 {
+	long ret = 0;
+
 	if (is_compat_task())
 		return -EINVAL;
 
 	if (test_thread_flag(TIF_TAGGED_ADDR))
-		return PR_TAGGED_ADDR_ENABLE;
+		ret = PR_TAGGED_ADDR_ENABLE;
 
-	return 0;
+	ret |= get_mte_ctrl();
+
+	return ret;
 }
 
 /*

include/uapi/linux/prctl.h

@@ -233,6 +233,12 @@ struct prctl_mm_map {
 #define PR_SET_TAGGED_ADDR_CTRL		55
 #define PR_GET_TAGGED_ADDR_CTRL		56
 # define PR_TAGGED_ADDR_ENABLE		(1UL << 0)
+/* MTE tag check fault modes */
+# define PR_MTE_TCF_SHIFT		1
+# define PR_MTE_TCF_NONE		(0UL << PR_MTE_TCF_SHIFT)
+# define PR_MTE_TCF_SYNC		(1UL << PR_MTE_TCF_SHIFT)
+# define PR_MTE_TCF_ASYNC		(2UL << PR_MTE_TCF_SHIFT)
+# define PR_MTE_TCF_MASK		(3UL << PR_MTE_TCF_SHIFT)
 
 /* Control reclaim behavior when allocating memory */
 #define PR_SET_IO_FLUSHER		57