Commit 1c3c1e79 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: bcmgenet: fix bcmgenet_wol_resume

bcmgenet_wol_resume() will create an unbalanced clock state for the
wol_clk clock pointer since everywhere else in the code, we always call
clk_prepare_enable() and clk_disable_unprepare(). This function also
calls init_umac() which is neither correct nor necessary since
bcmgenet_resume() and bcmgenet_open() already does that.

Finally calling bcmgenet_wol_resume() in bcmgenet_open() is not correct,
since the interface would not have been able to put us in Wake-on-LAN
mode if it was not UP before.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 8fdb0e0f
...@@ -1965,14 +1965,8 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv, ...@@ -1965,14 +1965,8 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv,
static int bcmgenet_wol_resume(struct bcmgenet_priv *priv) static int bcmgenet_wol_resume(struct bcmgenet_priv *priv)
{ {
int ret;
/* From WOL-enabled suspend, switch to regular clock */ /* From WOL-enabled suspend, switch to regular clock */
clk_disable(priv->clk_wol); clk_disable_unprepare(priv->clk_wol);
/* init umac registers to synchronize s/w with h/w */
ret = init_umac(priv);
if (ret)
return ret;
phy_init_hw(priv->phydev); phy_init_hw(priv->phydev);
/* Speed settings must be restored */ /* Speed settings must be restored */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment