ALSA: usbaudio - Enable the E-MU 0204 USB

Signed-off-by: Joseph Teichman <josteich@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/usb/mixer.c

@@ -95,7 +95,7 @@ enum {
 };
 
 
-/*E-mu 0202(0404) eXtension Unit(XU) control*/
+/*E-mu 0202/0404/0204 eXtension Unit(XU) control*/
 enum {
 	USB_XU_CLOCK_RATE 		= 0xe301,
 	USB_XU_CLOCK_SOURCE		= 0xe302,
@@ -1566,7 +1566,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw
 			cval->initialized = 1;
 		} else {
 			if (type == USB_XU_CLOCK_RATE) {
-				/* E-Mu USB 0404/0202/TrackerPre
+				/* E-Mu USB 0404/0202/TrackerPre/0204
 				 * samplerate control quirk
 				 */
 				cval->min = 0;

sound/usb/quirks-table.h

@@ -79,6 +79,13 @@
 	.idProduct = 0x3f0a,
 	.bInterfaceClass = USB_CLASS_AUDIO,
 },
+{
+	/* E-Mu 0204 USB */
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor = 0x041e,
+	.idProduct = 0x3f19,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+},
 
 /*
  * Logitech QuickCam: bDeviceClass is vendor-specific, so generic interface

sound/usb/quirks.c

@@ -532,7 +532,7 @@ int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat
 }
 
 /*
- * For E-Mu 0404USB/0202USB/TrackerPre sample rate should be set for device,
+ * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
  * not for interface.
  */
 
@@ -589,6 +589,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 	case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
 	case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
 	case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
+	case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
 		set_format_emu_quirk(subs, fmt);
 		break;
 	}