[MTD] [NAND] Move ancient NAND chip support into a config option

The support for obsolete ancient NAND chips adds .data size and one
of the old ids conflicts with a modern one. Make the support for
such chips depending on a config option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

drivers/mtd/nand/Kconfig

@@ -31,6 +31,15 @@ config MTD_NAND_ECC_SMC
 	  Software ECC according to the Smart Media Specification.
 	  The original Linux implementation had byte 0 and 1 swapped.
 
+config MTD_NAND_MUSEUM_IDS
+	bool "Enable chip ids for obsolete ancient NAND devices"
+	depends on MTD_NAND
+	default n
+	help
+	  Enable this option only when your board has first generation
+	  NAND chips (page size 256 byte, erase size 4-8KiB). The IDs
+	  of these chips were reused by later, larger chips.
+
 config MTD_NAND_AUTCPU12
 	tristate "SmartMediaCard on autronix autcpu12 board"
 	depends on MTD_NAND && ARCH_AUTCPU12

drivers/mtd/nand/nand_ids.c

@@ -24,6 +24,8 @@
 *	512	512 Byte page size
 */
 struct nand_flash_dev nand_flash_ids[] = {
+
+#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
 	{"NAND 1MiB 5V 8-bit",		0x6e, 256, 1, 0x1000, 0},
 	{"NAND 2MiB 5V 8-bit",		0x64, 256, 2, 0x1000, 0},
 	{"NAND 4MiB 5V 8-bit",		0x6b, 512, 4, 0x2000, 0},
@@ -39,6 +41,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 8MiB 3,3V 8-bit",	0xe6, 512, 8, 0x2000, 0},
 	{"NAND 8MiB 1,8V 16-bit",	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
 	{"NAND 8MiB 3,3V 16-bit",	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+#endif
 
 	{"NAND 16MiB 1,8V 8-bit",	0x33, 512, 16, 0x4000, 0},
 	{"NAND 16MiB 3,3V 8-bit",	0x73, 512, 16, 0x4000, 0},