arm64: dts: rockchip: add mipi_dsi1 support for rk3399

This patch adds the information for the secondary MIPI DSI controller,
e.g., interrupts, grf, clocks, ports and so on. Mirrors the existing
definition for dsi0.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1526,6 +1526,11 @@ vopl_out_hdmi: endpoint@2 {
 				reg = <2>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+
+			vopl_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopl>;
+			};
 		};
 	};
 
@@ -1573,6 +1578,11 @@ vopb_out_hdmi: endpoint@2 {
 				reg = <2>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+
+			vopb_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopb>;
+			};
 		};
 	};
 
@@ -1670,6 +1680,41 @@ mipi_in_vopl: endpoint@1 {
 		};
 	};
 
+	mipi_dsi1: mipi@ff968000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff968000 0x0 0x8000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
+			 <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
+		power-domains = <&power RK3399_PD_VIO>;
+		resets = <&cru SRST_P_MIPI_DSI1>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi1_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi1_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi1>;
+				};
+
+				mipi1_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi1>;
+				};
+			};
+		};
+	};
+
 	edp: edp@ff970000 {
 		compatible = "rockchip,rk3399-edp";
 		reg = <0x0 0xff970000 0x0 0x8000>;