Commit 1f0f467b authored by Harish Patil's avatar Harish Patil Committed by David S. Miller

qlcnic: Add hwmon interface to export board temperature.

Signed-off-by: default avatarHarish Patil <harish.patil@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ddfbac07
......@@ -66,6 +66,17 @@ config QLCNIC_VXLAN
Say Y here if you want to enable hardware offload support for
Virtual eXtensible Local Area Network (VXLAN) in the driver.
config QLCNIC_HWMON
bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
depends on QLCNIC && HWMON
default y
---help---
This configuration parameter can be used to read the
board temperature in Converged Ethernet devices
supported by qlcnic.
This data is available via the hwmon sysfs interface.
config QLGE
tristate "QLogic QLGE 10Gb Ethernet Driver Support"
depends on PCI
......
......@@ -537,6 +537,7 @@ struct qlcnic_hardware_context {
u8 phys_port_id[ETH_ALEN];
u8 lb_mode;
u16 vxlan_port;
struct device *hwmon_dev;
};
struct qlcnic_adapter_stats {
......@@ -2361,4 +2362,18 @@ static inline u32 qlcnic_get_vnic_func_count(struct qlcnic_adapter *adapter)
else
return QLC_DEFAULT_VNIC_COUNT;
}
#ifdef CONFIG_QLCNIC_HWMON
void qlcnic_register_hwmon_dev(struct qlcnic_adapter *);
void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *);
#else
static inline void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter)
{
return;
}
static inline void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter)
{
return;
}
#endif
#endif /* __QLCNIC_H_ */
......@@ -2593,7 +2593,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
qlcnic_alloc_lb_filters_mem(adapter);
qlcnic_add_sysfs(adapter);
qlcnic_register_hwmon_dev(adapter);
return 0;
err_out_disable_mbx_intr:
......@@ -2700,6 +2700,8 @@ static void qlcnic_remove(struct pci_dev *pdev)
qlcnic_remove_sysfs(adapter);
qlcnic_unregister_hwmon_dev(adapter);
qlcnic_cleanup_pci_map(adapter->ahw);
qlcnic_release_firmware(adapter);
......
......@@ -19,6 +19,10 @@
#include <linux/sysfs.h>
#include <linux/aer.h>
#include <linux/log2.h>
#ifdef CONFIG_QLCNIC_HWMON
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#endif
#define QLC_STATUS_UNSUPPORTED_CMD -2
......@@ -1243,6 +1247,68 @@ static struct bin_attribute bin_attr_flash = {
.write = qlcnic_83xx_sysfs_flash_write_handler,
};
#ifdef CONFIG_QLCNIC_HWMON
static ssize_t qlcnic_hwmon_show_temp(struct device *dev,
struct device_attribute *dev_attr,
char *buf)
{
struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
unsigned int temperature = 0, value = 0;
if (qlcnic_83xx_check(adapter))
value = QLCRDX(adapter->ahw, QLC_83XX_ASIC_TEMP);
else if (qlcnic_82xx_check(adapter))
value = QLC_SHARED_REG_RD32(adapter, QLCNIC_ASIC_TEMP);
temperature = qlcnic_get_temp_val(value);
/* display millidegree celcius */
temperature *= 1000;
return sprintf(buf, "%u\n", temperature);
}
/* hwmon-sysfs attributes */
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
qlcnic_hwmon_show_temp, NULL, 1);
static struct attribute *qlcnic_hwmon_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
NULL
};
ATTRIBUTE_GROUPS(qlcnic_hwmon);
void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter)
{
struct device *dev = &adapter->pdev->dev;
struct device *hwmon_dev;
/* Skip hwmon registration for a VF device */
if (qlcnic_sriov_vf_check(adapter)) {
adapter->ahw->hwmon_dev = NULL;
return;
}
hwmon_dev = hwmon_device_register_with_groups(dev, qlcnic_driver_name,
adapter,
qlcnic_hwmon_groups);
if (IS_ERR(hwmon_dev)) {
dev_err(dev, "Cannot register with hwmon, err=%ld\n",
PTR_ERR(hwmon_dev));
hwmon_dev = NULL;
}
adapter->ahw->hwmon_dev = hwmon_dev;
}
void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter)
{
struct device *hwmon_dev = adapter->ahw->hwmon_dev;
if (hwmon_dev) {
hwmon_device_unregister(hwmon_dev);
adapter->ahw->hwmon_dev = NULL;
}
}
#endif
void qlcnic_create_sysfs_entries(struct qlcnic_adapter *adapter)
{
struct device *dev = &adapter->pdev->dev;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment