Merge branch 'tegra/cleanup' into next/dt

Dependency for tegra/dt branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/tegra/emc.txt → Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt

@@ -15,7 +15,7 @@ Child device nodes describe the memory settings for different configurations and
 
 Example:
 
-	emc@7000f400 {
+	memory-controller@7000f400 {
 		#address-cells = < 1 >;
 		#size-cells = < 0 >;
 		compatible = "nvidia,tegra20-emc";

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller@0x7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller {
 		compatible = "nvidia,tegra30-mc";
 		reg = <0x7000f000 0x010
 		       0x7000f03c 0x1b4

arch/arm/boot/dts/tegra-harmony.dts → arch/arm/boot/dts/tegra20-harmony.dts

@@ -307,7 +307,6 @@ sdhci@c8000600 {
 		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
-		support-8bit;
 		bus-width = <8>;
 	};
 

arch/arm/boot/dts/tegra-paz00.dts → arch/arm/boot/dts/tegra20-paz00.dts

@@ -301,7 +301,6 @@ sdhci@c8000000 {
 
 	sdhci@c8000600 {
 		status = "okay";
-		support-8bit;
 		bus-width = <8>;
 	};
 

arch/arm/boot/dts/tegra-seaboard.dts → arch/arm/boot/dts/tegra20-seaboard.dts

@@ -334,7 +334,7 @@ magnetometer@c {
 		};
 	};
 
-	emc {
+	memory-controller@0x7000f400 {
 		emc-table@190000 {
 			reg = <190000>;
 			compatible = "nvidia,tegra20-emc-table";
@@ -397,7 +397,6 @@ sdhci@c8000400 {
 
 	sdhci@c8000600 {
 		status = "okay";
-		support-8bit;
 		bus-width = <8>;
 	};
 

arch/arm/boot/dts/tegra-ventana.dts → arch/arm/boot/dts/tegra20-ventana.dts

@@ -314,7 +314,6 @@ sdhci@c8000400 {
 
 	sdhci@c8000600 {
 		status = "okay";
-		support-8bit;
 		bus-width = <8>;
 	};
 

arch/arm/boot/dts/tegra20.dtsi

@@ -164,7 +164,7 @@ pmc {
 		reg = <0x7000e400 0x400>;
 	};
 
-	mc {
+	memory-controller@0x7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;
@@ -177,7 +177,7 @@ gart {
 		       0x58000000 0x02000000>;	/* GART aperture */
 	};
 
-	emc {
+	memory-controller@0x7000f400 {
 		compatible = "nvidia,tegra20-emc";
 		reg = <0x7000f400 0x200>;
 		#address-cells = <1>;

arch/arm/boot/dts/tegra-cardhu.dts → arch/arm/boot/dts/tegra30-cardhu.dts

@@ -144,7 +144,6 @@ sdhci@78000000 {
 
 	sdhci@78000600 {
 		status = "okay";
-		support-8bit;
 		bus-width = <8>;
 	};
 

arch/arm/boot/dts/tegra30.dtsi

@@ -167,7 +167,7 @@ pmc {
 		reg = <0x7000e400 0x400>;
 	};
 
-	mc {
+	memory-controller {
 		compatible = "nvidia,tegra30-mc";
 		reg = <0x7000f000 0x010
 		       0x7000f03c 0x1b4

arch/arm/mach-tegra/Kconfig

@@ -63,7 +63,6 @@ comment "Tegra board type"
 config MACH_HARMONY
        bool "Harmony board"
        depends on ARCH_TEGRA_2x_SOC
-       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
        help
          Support for nVidia Harmony development platform
 
@@ -71,7 +70,6 @@ config MACH_KAEN
        bool "Kaen board"
        depends on ARCH_TEGRA_2x_SOC
        select MACH_SEABOARD
-       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
        help
          Support for the Kaen version of Seaboard
 
@@ -84,7 +82,6 @@ config MACH_PAZ00
 config MACH_SEABOARD
        bool "Seaboard board"
        depends on ARCH_TEGRA_2x_SOC
-       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
        help
          Support for nVidia Seaboard development platform. It will
 	 also be included for some of the derivative boards that

arch/arm/mach-tegra/Makefile.boot

@@ -2,9 +2,9 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC)	+= 0x00008000
 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
 
-dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
-dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb
-dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
-dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb
-dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb
+dtb-$(CONFIG_MACH_HARMONY) += tegra20-harmony.dtb
+dtb-$(CONFIG_MACH_PAZ00) += tegra20-paz00.dtb
+dtb-$(CONFIG_MACH_SEABOARD) += tegra20-seaboard.dtb
+dtb-$(CONFIG_MACH_TRIMSLICE) += tegra20-trimslice.dtb
+dtb-$(CONFIG_MACH_VENTANA) += tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb

arch/arm/mach-tegra/cpuidle.c

@@ -27,9 +27,9 @@
 #include <linux/cpuidle.h>
 #include <linux/hrtimer.h>
 
-#include <mach/iomap.h>
+#include <asm/proc-fns.h>
 
-extern void tegra_cpu_wfi(void);
+#include <mach/iomap.h>
 
 static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv, int index);
@@ -64,7 +64,7 @@ static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
 
 	enter = ktime_get();
 
-	tegra_cpu_wfi();
+	cpu_do_idle();
 
 	exit = ktime_sub(ktime_get(), enter);
 	us = ktime_to_us(exit);

arch/arm/mach-tegra/sleep.S

@@ -62,32 +62,3 @@
 	movw	\reg, #:lower16:\val
 	movt	\reg, #:upper16:\val
 .endm
-
-/*
- * tegra_cpu_wfi
- *
- * puts current CPU in clock-gated wfi using the flow controller
- *
- * corrupts r0-r3
- * must be called with MMU on
- */
-
-ENTRY(tegra_cpu_wfi)
-	cpu_id	r0
-	cpu_to_halt_reg r1, r0
-	cpu_to_csr_reg r2, r0
-	mov32	r0, TEGRA_FLOW_CTRL_VIRT
-	mov	r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-	str	r3, [r0, r2]	@ clear event & interrupt status
-	mov	r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME
-	str	r3, [r0, r1]	@ put flow controller in wait irq mode
-	dsb
-	wfi
-	mov	r3, #0
-	str	r3, [r0, r1]	@ clear flow controller halt status
-	mov	r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-	str	r3, [r0, r2]	@ clear event & interrupt status
-	dsb
-	mov	pc, lr
-ENDPROC(tegra_cpu_wfi)
-

drivers/amba/tegra-ahb.c

@@ -264,11 +264,6 @@ static int __devinit tegra_ahb_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit tegra_ahb_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
 static const struct of_device_id tegra_ahb_of_match[] __devinitconst = {
 	{ .compatible = "nvidia,tegra30-ahb", },
 	{ .compatible = "nvidia,tegra20-ahb", },
@@ -277,7 +272,6 @@ static const struct of_device_id tegra_ahb_of_match[] __devinitconst = {
 
 static struct platform_driver tegra_ahb_driver = {
 	.probe = tegra_ahb_probe,
-	.remove = __devexit_p(tegra_ahb_remove),
 	.driver = {
 		.name = DRV_NAME,
 		.owner = THIS_MODULE,

drivers/mmc/host/sdhci-tegra.c

@@ -223,6 +223,7 @@ static struct tegra_sdhci_platform_data * __devinit sdhci_tegra_dt_parse_pdata(
 {
 	struct tegra_sdhci_platform_data *plat;
 	struct device_node *np = pdev->dev.of_node;
+	u32 bus_width;
 
 	if (!np)
 		return NULL;
@@ -236,7 +237,9 @@ static struct tegra_sdhci_platform_data * __devinit sdhci_tegra_dt_parse_pdata(
 	plat->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
 	plat->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
 	plat->power_gpio = of_get_named_gpio(np, "power-gpios", 0);
-	if (of_find_property(np, "support-8bit", NULL))
+
+	if (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
+	    bus_width == 8)
 		plat->is_8bit = 1;
 
 	return plat;

sound/soc/tegra/Kconfig

@@ -58,17 +58,9 @@ config SND_SOC_TEGRA_WM8753
 	  Say Y or M here if you want to add support for SoC audio on Tegra
 	  boards using the WM8753 codec, such as Whistler.
 
-config MACH_HAS_SND_SOC_TEGRA_WM8903
-	bool
-	help
-	  Machines that use the SND_SOC_TEGRA_WM8903 driver should select
-	  this config option, in order to allow the user to enable
-	  SND_SOC_TEGRA_WM8903.
-
 config SND_SOC_TEGRA_WM8903
 	tristate "SoC Audio support for Tegra boards using a WM8903 codec"
 	depends on SND_SOC_TEGRA && I2C
-	depends on MACH_HAS_SND_SOC_TEGRA_WM8903
 	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
 	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
 	select SND_SOC_WM8903
@@ -79,7 +71,7 @@ config SND_SOC_TEGRA_WM8903
 
 config SND_SOC_TEGRA_TRIMSLICE
 	tristate "SoC Audio support for TrimSlice board"
-	depends on SND_SOC_TEGRA && MACH_TRIMSLICE && I2C
+	depends on SND_SOC_TEGRA && I2C
 	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
 	select SND_SOC_TLV320AIC23
 	help