ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators

The panels need a bit of time to actually turn on. If this isn't
observed, this results in problems when trying talk to the panels
and thus produces detection errors. 100ms seem to be a safe value
for the time being.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>

arch/arm/boot/dts/rk3288-veyron-jaq.dts

@@ -61,6 +61,7 @@ panel_regulator: panel-regulator {
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};
 

arch/arm/boot/dts/rk3288-veyron-jerry.dts

@@ -60,6 +60,7 @@ panel_regulator: panel-regulator {
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};
 

arch/arm/boot/dts/rk3288-veyron-minnie.dts

@@ -70,6 +70,7 @@ panel_regulator: panel-regulator {
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};
 

arch/arm/boot/dts/rk3288-veyron-speedy.dts

@@ -61,6 +61,7 @@ panel_regulator: panel-regulator {
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};