ide: add ->read_altstatus method

* Remove ide_read_altstatus() inline helper.

* Add ->read_altstatus method for reading ATA Alternate Status
  register and use it instead of ->INB.

There should be no functional changes caused by this patch.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent b73c7ee2
......@@ -119,6 +119,14 @@ static u8 ide_read_status(ide_hwif_t *hwif)
return inb(hwif->io_ports.status_addr);
}
static u8 ide_read_altstatus(ide_hwif_t *hwif)
{
if (hwif->host_flags & IDE_HFLAG_MMIO)
return readb((void __iomem *)hwif->io_ports.ctl_addr);
else
return inb(hwif->io_ports.ctl_addr);
}
static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
{
if (hwif->host_flags & IDE_HFLAG_MMIO)
......@@ -349,6 +357,7 @@ void default_hwif_transport(ide_hwif_t *hwif)
{
hwif->exec_command = ide_exec_command;
hwif->read_status = ide_read_status;
hwif->read_altstatus = ide_read_altstatus;
hwif->read_sff_dma_status = ide_read_sff_dma_status;
hwif->tf_load = ide_tf_load;
......@@ -511,7 +520,7 @@ int drive_is_ready (ide_drive_t *drive)
* about possible isa-pnp and pci-pnp issues yet.
*/
if (hwif->io_ports.ctl_addr)
stat = ide_read_altstatus(drive);
stat = hwif->read_altstatus(hwif);
else
/* Note: this may clear a pending IRQ!! */
stat = hwif->read_status(hwif);
......@@ -724,7 +733,7 @@ int ide_driveid_update(ide_drive_t *drive)
}
msleep(50); /* give drive a breather */
stat = ide_read_altstatus(drive);
stat = hwif->read_altstatus(hwif);
} while (stat & BUSY_STAT);
msleep(50); /* wait for IRQ and DRQ_STAT */
......
......@@ -275,7 +275,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
msleep(50);
if (io_ports->ctl_addr) {
a = ide_read_altstatus(drive);
a = hwif->read_altstatus(hwif);
s = hwif->read_status(hwif);
if ((a ^ s) & ~INDEX_STAT)
/* ancient Seagate drives, broken interfaces */
......@@ -306,7 +306,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
}
/* give drive a breather */
msleep(50);
s = use_altstatus ? ide_read_altstatus(drive)
s = use_altstatus ? hwif->read_altstatus(hwif)
: hwif->read_status(hwif);
} while (s & BUSY_STAT);
......
......@@ -139,6 +139,11 @@ static u8 scc_read_status(ide_hwif_t *hwif)
return (u8)in_be32((void *)hwif->io_ports.status_addr);
}
static u8 scc_read_altstatus(ide_hwif_t *hwif)
{
return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
}
static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
{
return (u8)in_be32((void *)(hwif->dma_base + 4));
......@@ -794,6 +799,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
hwif->exec_command = scc_exec_command;
hwif->read_status = scc_read_status;
hwif->read_altstatus = scc_read_altstatus;
hwif->read_sff_dma_status = scc_read_sff_dma_status;
hwif->tf_load = scc_tf_load;
......
......@@ -491,6 +491,7 @@ typedef struct hwif_s {
void (*exec_command)(struct hwif_s *, u8);
u8 (*read_status)(struct hwif_s *);
u8 (*read_altstatus)(struct hwif_s *);
u8 (*read_sff_dma_status)(struct hwif_s *);
void (*tf_load)(ide_drive_t *, struct ide_task_s *);
......@@ -1363,13 +1364,6 @@ static inline void ide_set_irq(ide_drive_t *drive, int on)
hwif->io_ports.ctl_addr);
}
static inline u8 ide_read_altstatus(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
return hwif->INB(hwif->io_ports.ctl_addr);
}
static inline u8 ide_read_error(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment