drm/exynos: add exynos5420 support for fimd

This patch adds a exynos5420 driver data to support mic_bypass
option to bypass the mic from display out path.
The mic(Mobile image compressor) compresses RGB data from fimd
and send the compressed data to the mipi dsi.
The bypass option can be founded from system register and the bit
is 11. The option bit has been introduced since exynos5420. The
only difference between exynos5250 and exynos5420/exynos5422 is
existence of the bit. Until the MIC is defined and enabled from
device tree, the bypass mic will be default option.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -12,7 +12,8 @@ Required properties:
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
 		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
-		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
+		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
 
 - reg: physical base address and length of the FIMD registers set.
 

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -94,12 +94,14 @@ struct fimd_driver_data {
 	unsigned int lcdblk_offset;
 	unsigned int lcdblk_vt_shift;
 	unsigned int lcdblk_bypass_shift;
+	unsigned int lcdblk_mic_bypass_shift;
 
 	unsigned int has_shadowcon:1;
 	unsigned int has_clksel:1;
 	unsigned int has_limited_fmt:1;
 	unsigned int has_vidoutcon:1;
 	unsigned int has_vtsel:1;
+	unsigned int has_mic_bypass:1;
 };
 
 static struct fimd_driver_data s3c64xx_fimd_driver_data = {
@@ -145,6 +147,18 @@ static struct fimd_driver_data exynos5_fimd_driver_data = {
 	.has_vtsel = 1,
 };
 
+static struct fimd_driver_data exynos5420_fimd_driver_data = {
+	.timing_base = 0x20000,
+	.lcdblk_offset = 0x214,
+	.lcdblk_vt_shift = 24,
+	.lcdblk_bypass_shift = 15,
+	.lcdblk_mic_bypass_shift = 11,
+	.has_shadowcon = 1,
+	.has_vidoutcon = 1,
+	.has_vtsel = 1,
+	.has_mic_bypass = 1,
+};
+
 struct fimd_context {
 	struct device			*dev;
 	struct drm_device		*drm_dev;
@@ -184,6 +198,8 @@ static const struct of_device_id fimd_driver_dt_match[] = {
 	  .data = &exynos4415_fimd_driver_data },
 	{ .compatible = "samsung,exynos5250-fimd",
 	  .data = &exynos5_fimd_driver_data },
+	{ .compatible = "samsung,exynos5420-fimd",
+	  .data = &exynos5420_fimd_driver_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
@@ -461,6 +477,18 @@ static void fimd_commit(struct exynos_drm_crtc *crtc)
 		return;
 	}
 
+	/* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
+	 * bit should be cleared.
+	 */
+	if (driver_data->has_mic_bypass && ctx->sysreg &&
+	    regmap_update_bits(ctx->sysreg,
+				driver_data->lcdblk_offset,
+				0x1 << driver_data->lcdblk_mic_bypass_shift,
+				0x1 << driver_data->lcdblk_mic_bypass_shift)) {
+		DRM_ERROR("Failed to update sysreg for bypass mic.\n");
+		return;
+	}
+
 	/* setup horizontal and vertical display size. */
 	val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
 	       VIDTCON2_HOZVAL(mode->hdisplay - 1) |
@@ -861,7 +889,8 @@ static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable)
 	 * clock. On these SoCs the bootloader may enable it but any
 	 * power domain off/on will reset it to disable state.
 	 */
-	if (ctx->driver_data != &exynos5_fimd_driver_data)
+	if (ctx->driver_data != &exynos5_fimd_driver_data ||
+	    ctx->driver_data != &exynos5420_fimd_driver_data)
 		return;
 
 	val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;