Commit 21764099 authored by Melissa Wen's avatar Melissa Wen Committed by Alex Deucher

drm/amd/display: cleanup codestyle type BLOCK_COMMENT_STYLE on dc_link

Solve comments alignment problems on dc_link file
Signed-off-by: default avatarMelissa Wen <melissa.srw@gmail.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent e520859c
...@@ -64,11 +64,11 @@ ...@@ -64,11 +64,11 @@
enum { enum {
PEAK_FACTOR_X1000 = 1006, PEAK_FACTOR_X1000 = 1006,
/* /*
* Some receivers fail to train on first try and are good * Some receivers fail to train on first try and are good
* on subsequent tries. 2 retries should be plenty. If we * on subsequent tries. 2 retries should be plenty. If we
* don't have a successful training then we don't expect to * don't have a successful training then we don't expect to
* ever get one. * ever get one.
*/ */
LINK_TRAINING_MAX_VERIFY_RETRY = 2 LINK_TRAINING_MAX_VERIFY_RETRY = 2
}; };
...@@ -270,7 +270,8 @@ static enum ddc_transaction_type get_ddc_transaction_type( ...@@ -270,7 +270,8 @@ static enum ddc_transaction_type get_ddc_transaction_type(
case SIGNAL_TYPE_DISPLAY_PORT_MST: case SIGNAL_TYPE_DISPLAY_PORT_MST:
/* MST does not use I2COverAux, but there is the /* MST does not use I2COverAux, but there is the
* SPECIAL use case for "immediate dwnstrm device * SPECIAL use case for "immediate dwnstrm device
* access" (EPR#370830). */ * access" (EPR#370830).
*/
transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX;
break; break;
...@@ -369,7 +370,8 @@ bool dc_link_is_dp_sink_present(struct dc_link *link) ...@@ -369,7 +370,8 @@ bool dc_link_is_dp_sink_present(struct dc_link *link)
/* Open GPIO and set it to I2C mode */ /* Open GPIO and set it to I2C mode */
/* Note: this GpioMode_Input will be converted /* Note: this GpioMode_Input will be converted
* to GpioConfigType_I2cAuxDualMode in GPIO component, * to GpioConfigType_I2cAuxDualMode in GPIO component,
* which indicates we need additional delay */ * which indicates we need additional delay
*/
if (GPIO_RESULT_OK != dal_ddc_open( if (GPIO_RESULT_OK != dal_ddc_open(
ddc, GPIO_MODE_INPUT, GPIO_DDC_CONFIG_TYPE_MODE_I2C)) { ddc, GPIO_MODE_INPUT, GPIO_DDC_CONFIG_TYPE_MODE_I2C)) {
...@@ -414,14 +416,16 @@ static enum signal_type link_detect_sink( ...@@ -414,14 +416,16 @@ static enum signal_type link_detect_sink(
link->link_enc->id, link->link_id); link->link_enc->id, link->link_id);
/* Internal digital encoder will detect only dongles /* Internal digital encoder will detect only dongles
* that require digital signal */ * that require digital signal
*/
/* Detection mechanism is different /* Detection mechanism is different
* for different native connectors. * for different native connectors.
* LVDS connector supports only LVDS signal; * LVDS connector supports only LVDS signal;
* PCIE is a bus slot, the actual connector needs to be detected first; * PCIE is a bus slot, the actual connector needs to be detected first;
* eDP connector supports only eDP signal; * eDP connector supports only eDP signal;
* HDMI should check straps for audio */ * HDMI should check straps for audio
*/
/* PCIE detects the actual connector on add-on board */ /* PCIE detects the actual connector on add-on board */
...@@ -432,7 +436,8 @@ static enum signal_type link_detect_sink( ...@@ -432,7 +436,8 @@ static enum signal_type link_detect_sink(
switch (link->link_id.id) { switch (link->link_id.id) {
case CONNECTOR_ID_HDMI_TYPE_A: { case CONNECTOR_ID_HDMI_TYPE_A: {
/* check audio support: /* check audio support:
* if native HDMI is not supported, switch to DVI */ * if native HDMI is not supported, switch to DVI
*/
struct audio_support *aud_support = &link->dc->res_pool->audio_support; struct audio_support *aud_support = &link->dc->res_pool->audio_support;
if (!aud_support->hdmi_audio_native) if (!aud_support->hdmi_audio_native)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment