[SCSI] qla4xxx: Added AER support for ISP82xx

Added support for PCI error handling
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/qla4xxx/ql4_def.h

@@ -36,6 +36,24 @@
 #include "ql4_dbg.h"
 #include "ql4_nx.h"
 
+#if defined(CONFIG_PCIEAER)
+#include <linux/aer.h>
+#else
+/* AER releated */
+static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+#endif
+
 #ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
 #define PCI_DEVICE_ID_QLOGIC_ISP4010	0x4010
 #endif
@@ -381,7 +399,8 @@ struct scsi_qla_host {
 #define AF_MSIX_ENABLED			17 /* 0x00020000 */
 #define AF_MBOX_COMMAND_NOPOLL		18 /* 0x00040000 */
 #define AF_FW_RECOVERY			19 /* 0x00080000 */
-
+#define AF_EEH_BUSY			20 /* 0x00100000 */
+#define AF_PCI_CHANNEL_IO_PERM_FAILURE	21 /* 0x00200000 */
 
 	unsigned long dpc_flags;
 
@@ -617,6 +636,15 @@ static inline int is_qla8022(struct scsi_qla_host *ha)
 	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
 }
 
+/* Note: Currently AER/EEH is now supported only for 8022 cards
+ * This function needs to be updated when AER/EEH is enabled
+ * for other cards.
+ */
+static inline int is_aer_supported(struct scsi_qla_host *ha)
+{
+	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
+}
+
 static inline int adapter_up(struct scsi_qla_host *ha)
 {
 	return (test_bit(AF_ONLINE, &ha->flags) != 0) &&

drivers/scsi/qla4xxx/ql4_glbl.h

@@ -132,6 +132,7 @@ void qla4_8xxx_idc_unlock(struct scsi_qla_host *ha);
 int qla4_8xxx_device_state_handler(struct scsi_qla_host *ha);
 void qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha);
 void qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha);
+inline void qla4_8xxx_set_drv_active(struct scsi_qla_host *ha);
 
 extern int ql4xextended_error_logging;
 extern int ql4xdiscoverywait;

drivers/scsi/qla4xxx/ql4_init.c

@@ -308,7 +308,6 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 			DEBUG2(printk("scsi%ld: %s: unable to get firmware "
 				      "state\n", ha->host_no, __func__));
 			break;
-
 		}
 
 		if (ha->firmware_state & FW_STATE_ERROR) {
@@ -445,6 +444,10 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
 {
 	int status = QLA_ERROR;
 
+	if (is_aer_supported(ha) &&
+	    test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))
+		return status;
+
 	/* For 82xx, stop firmware before initializing because if BIOS
 	 * has previously initialized firmware, then driver's initialize
 	 * firmware will fail. */

drivers/scsi/qla4xxx/ql4_isr.c

@@ -816,6 +816,9 @@ irqreturn_t qla4_8xxx_intr_handler(int irq, void *dev_id)
 	unsigned long flags = 0;
 	uint8_t reqs_count = 0;
 
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return IRQ_HANDLED;
+
 	ha->isr_count++;
 	status = qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
 	if (!(status & ha->nx_legacy_intr.int_vec_bit))

drivers/scsi/qla4xxx/ql4_mbx.c

@@ -48,6 +48,13 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 		return status;
 	}
 
+	if ((is_aer_supported(ha)) &&
+	    (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))) {
+		DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, "
+		    "timeout MBX Exiting.\n", ha->host_no, __func__));
+		return status;
+	}
+
 	/* Mailbox code active */
 	wait_count = MBOX_TOV * 100;
 
@@ -159,6 +166,7 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 		while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
 			if (time_after_eq(jiffies, wait_count))
 				break;
+
 			/*
 			 * Service the interrupt.
 			 * The ISR will save the mailbox status registers

drivers/scsi/qla4xxx/ql4_nx.c

@@ -1418,7 +1418,7 @@ static int qla4_8xxx_rcvpeg_ready(struct scsi_qla_host *ha)
 	return QLA_SUCCESS;
 }
 
-static inline void
+inline void
 qla4_8xxx_set_drv_active(struct scsi_qla_host *ha)
 {
 	uint32_t drv_active;
@@ -1441,11 +1441,15 @@ qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha)
 static inline int
 qla4_8xxx_need_reset(struct scsi_qla_host *ha)
 {
-	uint32_t drv_state;
+	uint32_t drv_state, drv_active;
 	int rval;
 
+	drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
 	drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
 	rval = drv_state & (1 << (ha->func_num * 4));
+	if ((test_bit(AF_EEH_BUSY, &ha->flags)) && drv_active)
+		rval = 1;
+
 	return rval;
 }