Commit 22f0d90a authored by Mark Brown's avatar Mark Brown

regmap: Support register patch sets

Device manufacturers frequently provide register sequences, usually not
fully documented, to be run at startup in order to provide better defaults
for devices (for example, improving performance in the light of silicon
evaluation). Support such updates by allowing drivers to register update
sets with the core. These updates will be written to the device immediately
and will also be rewritten when the cache is synced.

The assumption is that the reason for resyncing the cache will always be
that the device has been powered off. If this turns out to not be the case
then a separate operation can be provided.

Currently the implementation only allows a single set of updates to be
specified for a device, this could be extended in future.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent dcd6c922
......@@ -75,6 +75,9 @@ struct regmap {
const void *reg_defaults_raw;
void *cache;
bool cache_dirty;
struct reg_default *patch;
int patch_regs;
};
struct regcache_ops {
......
......@@ -268,6 +268,17 @@ int regcache_sync(struct regmap *map)
map->cache_ops->name);
name = map->cache_ops->name;
trace_regcache_sync(map->dev, name, "start");
/* Apply any patch first */
for (i = 0; i < map->patch_regs; i++) {
ret = _regmap_write(map, map->patch[i].reg, map->patch[i].def);
if (ret != 0) {
dev_err(map->dev, "Failed to write %x = %x: %d\n",
map->patch[i].reg, map->patch[i].def, ret);
goto out;
}
}
if (!map->cache_dirty)
goto out;
if (map->cache_ops->sync) {
......
......@@ -669,6 +669,64 @@ int regmap_update_bits_check(struct regmap *map, unsigned int reg,
}
EXPORT_SYMBOL_GPL(regmap_update_bits_check);
/**
* regmap_register_patch: Register and apply register updates to be applied
* on device initialistion
*
* @map: Register map to apply updates to.
* @regs: Values to update.
* @num_regs: Number of entries in regs.
*
* Register a set of register updates to be applied to the device
* whenever the device registers are synchronised with the cache and
* apply them immediately. Typically this is used to apply
* corrections to be applied to the device defaults on startup, such
* as the updates some vendors provide to undocumented registers.
*/
int regmap_register_patch(struct regmap *map, const struct reg_default *regs,
int num_regs)
{
int i, ret;
bool bypass;
/* If needed the implementation can be extended to support this */
if (map->patch)
return -EBUSY;
mutex_lock(&map->lock);
bypass = map->cache_bypass;
map->cache_bypass = true;
/* Write out first; it's useful to apply even if we fail later. */
for (i = 0; i < num_regs; i++) {
ret = _regmap_write(map, regs[i].reg, regs[i].def);
if (ret != 0) {
dev_err(map->dev, "Failed to write %x = %x: %d\n",
regs[i].reg, regs[i].def, ret);
goto out;
}
}
map->patch = kcalloc(sizeof(struct reg_default), num_regs, GFP_KERNEL);
if (map->patch != NULL) {
memcpy(map->patch, regs,
num_regs * sizeof(struct reg_default));
map->patch_regs = num_regs;
} else {
ret = -ENOMEM;
}
out:
map->cache_bypass = bypass;
mutex_unlock(&map->lock);
return ret;
}
EXPORT_SYMBOL_GPL(regmap_register_patch);
static int __init regmap_initcall(void)
{
regmap_debugfs_initcall();
......
......@@ -149,6 +149,9 @@ void regcache_cache_only(struct regmap *map, bool enable);
void regcache_cache_bypass(struct regmap *map, bool enable);
void regcache_mark_dirty(struct regmap *map);
int regmap_register_patch(struct regmap *map, const struct reg_default *regs,
int num_regs);
/**
* Description of an IRQ for the generic regmap irq_chip.
*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment