phy-rockchip-pcie: remove deassert of phy_rst from exit callback

The deassert of phy_rst from exit callback is incorrect as when
doing phy_exit, we expect the phy_rst is on asserted state which was
done by power_off callback, but not deasserted state. Meanwhile when
disabling clk_pciephy_ref, the assert/deassert signal can't actually
take effect on the phy. So let's fix it anyway.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

drivers/phy/phy-rockchip-pcie.c

@@ -249,21 +249,10 @@ static int rockchip_pcie_phy_init(struct phy *phy)
 static int rockchip_pcie_phy_exit(struct phy *phy)
 {
 	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
-	int err = 0;
 
 	clk_disable_unprepare(rk_phy->clk_pciephy_ref);
 
-	err = reset_control_deassert(rk_phy->phy_rst);
-	if (err) {
-		dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
-		goto err_reset;
-	}
-
-	return err;
-
-err_reset:
-	clk_prepare_enable(rk_phy->clk_pciephy_ref);
-	return err;
+	return 0;
 }
 
 static const struct phy_ops ops = {