Commit 23c5947a authored by Takashi Iwai's avatar Takashi Iwai Committed by Linus Torvalds

memstick: fix setup for JMicron 38x controllers

This patch corrects the definition of clock values for JMicron 38x
controllers and sets the value properly per interface type.
Also, it adds a check for TPC errors in the interrupt handler.
Signed-off-by: default avatarAries Lee <arieslee@jmicron.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 0193383a
......@@ -61,6 +61,7 @@ struct jmb38x_ms_host {
struct memstick_request *req;
unsigned char cmd_flags;
unsigned char io_pos;
unsigned char ifmode;
unsigned int io_word[2];
};
......@@ -136,15 +137,14 @@ struct jmb38x_ms {
#define PAD_PU_PD_ON_MS_SOCK0 0x5f8f0000
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
#define CLOCK_CONTROL_BY_MMIO 0x00000008
#define CLOCK_CONTROL_40MHZ 0x00000001
#define CLOCK_CONTROL_50MHZ 0x0000000a
#define CLOCK_CONTROL_60MHZ 0x00000008
#define CLOCK_CONTROL_62_5MHZ 0x0000000c
#define CLOCK_CONTROL_50MHZ 0x00000002
#define CLOCK_CONTROL_60MHZ 0x00000010
#define CLOCK_CONTROL_62_5MHZ 0x00000004
#define CLOCK_CONTROL_OFF 0x00000000
#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0
#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
enum {
CMD_READY = 0x01,
......@@ -390,8 +390,13 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
if (host->req->data_dir == READ)
cmd |= TPC_DIR;
if (host->req->need_card_int)
cmd |= TPC_WAIT_INT;
if (host->req->need_card_int) {
if (host->ifmode == MEMSTICK_SERIAL)
cmd |= TPC_GET_INT;
else
cmd |= TPC_WAIT_INT;
}
data = host->req->data;
......@@ -529,7 +534,10 @@ static irqreturn_t jmb38x_ms_isr(int irq, void *dev_id)
if (irq_status & INT_STATUS_ANY_ERR) {
if (irq_status & INT_STATUS_CRC_ERR)
host->req->error = -EILSEQ;
else
else if (irq_status & INT_STATUS_TPC_ERR) {
dev_dbg(&host->chip->pdev->dev, "TPC_ERR\n");
jmb38x_ms_complete_cmd(msh, 0);
} else
host->req->error = -ETIME;
} else {
if (host->cmd_flags & DMA_DATA) {
......@@ -644,7 +652,6 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
/* return -EIO; */
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
......@@ -675,7 +682,7 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
{
struct jmb38x_ms_host *host = memstick_priv(msh);
unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
unsigned int clock_ctl = CLOCK_CONTROL_BY_MMIO, clock_delay = 0;
int rc = 0;
switch (param) {
......@@ -687,9 +694,7 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
| HOST_CONTROL_CLOCK_EN
| HOST_CONTROL_HW_OC_P
| HOST_CONTROL_TDELAY_EN;
| HOST_CONTROL_CLOCK_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
......@@ -712,41 +717,42 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
return -EINVAL;
break;
case MEMSTICK_INTERFACE:
dev_dbg(&host->chip->pdev->dev,
"Set Host Interface Mode to %d\n", value);
host_ctl &= ~(HOST_CONTROL_FAST_CLK | HOST_CONTROL_REI |
HOST_CONTROL_REO);
host_ctl |= HOST_CONTROL_TDELAY_EN | HOST_CONTROL_HW_OC_P;
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
pci_read_config_dword(host->chip->pdev,
PCI_CTL_CLOCK_DLY_ADDR,
&clock_delay);
clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
: ~PCI_CTL_CLOCK_DLY_MASK_A;
if (value == MEMSTICK_SERIAL) {
host_ctl &= ~HOST_CONTROL_FAST_CLK;
host_ctl &= ~HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
clock_ctl |= CLOCK_CONTROL_40MHZ;
clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
clock_delay |= host->id ? (4 << 12) : (4 << 8);
host_ctl |= HOST_CONTROL_REO;
clock_ctl |= CLOCK_CONTROL_40MHZ;
clock_delay = 4;
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
clock_ctl = CLOCK_CONTROL_50MHZ;
clock_ctl |= CLOCK_CONTROL_50MHZ;
clock_delay = 0;
} else
return -EINVAL;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(CLOCK_CONTROL_OFF, host->addr + CLOCK_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
pci_write_config_dword(host->chip->pdev,
PCI_CTL_CLOCK_DLY_ADDR,
clock_delay);
pci_write_config_byte(host->chip->pdev,
PCI_CTL_CLOCK_DLY_ADDR + 1,
clock_delay);
host->ifmode = value;
break;
};
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment