Commit 23db764d authored by Al Viro's avatar Al Viro Committed by Linus Torvalds

[PATCH] Switch s390 to NO_IOMEM

Martin Schwidefsky wrote:
  "s390 does not even need (in|out)b(_p|).  I wondered what else from
   io.h do we not need.  The answer is: almost nothing.  With the devres
   patch from Al and the dma-mapping patch from Heiko we can get rid of
   iomem and all associated definitions."

So we'll just need to replace NO_IOPORT with NO_IOMEM in Kconfig and
kill arch/s390/mm/ioremap.c.

BTW, there's an annoying bit of junk in there - IO_SPACE_LIMIT.  We
only need it for /proc/ioports, which AFAICS shouldn't even be there
on s390 (or uml).  OTOH, removing that thing would mean a user-visible
change - we go from "empty file in /proc" to "no such file in /proc"...
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 5ea81769
......@@ -41,7 +41,7 @@ config GENERIC_HWEIGHT
config GENERIC_TIME
def_bool y
config NO_IOPORT
config NO_IOMEM
def_bool y
mainmenu "Linux Kernel Configuration"
......
......@@ -2,6 +2,6 @@
# Makefile for the linux s390-specific parts of the memory manager.
#
obj-y := init.o fault.o ioremap.o extmem.o mmap.o vmem.o
obj-y := init.o fault.o extmem.o mmap.o vmem.o
obj-$(CONFIG_CMM) += cmm.o
/*
* arch/s390/mm/ioremap.c
*
* S390 version
* Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Hartmut Penner (hp@de.ibm.com)
*
* Derived from "arch/i386/mm/extable.c"
* (C) Copyright 1995 1996 Linus Torvalds
*
* Re-map IO memory to kernel address space so that we can access it.
* This is needed for high PCI addresses that aren't mapped in the
* 640k-1MB IO memory area on PC's
*/
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/io.h>
#include <asm/pgalloc.h>
/*
* Generic mapping function (not visible outside):
*/
/*
* Remap an arbitrary physical address space into the kernel virtual
* address space. Needed when the kernel wants to access high addresses
* directly.
*/
void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
{
void * addr;
struct vm_struct * area;
if (phys_addr < virt_to_phys(high_memory))
return phys_to_virt(phys_addr);
if (phys_addr & ~PAGE_MASK)
return NULL;
size = PAGE_ALIGN(size);
if (!size || size > phys_addr + size)
return NULL;
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
addr = area->addr;
if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
phys_addr, __pgprot(flags))) {
vfree(addr);
return NULL;
}
return addr;
}
void iounmap(void *addr)
{
if (addr > high_memory)
vfree(addr);
}
......@@ -13,7 +13,6 @@
#ifdef __KERNEL__
#include <linux/vmalloc.h>
#include <asm/page.h>
#define IO_SPACE_LIMIT 0xffffffff
......@@ -41,70 +40,6 @@ static inline void * phys_to_virt(unsigned long address)
return __io_virt(address);
}
extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
static inline void * ioremap (unsigned long offset, unsigned long size)
{
return __ioremap(offset, size, 0);
}
/*
* This one maps high address device memory and turns off caching for that area.
* it's useful if some control registers are in such an area and write combining
* or read caching is not desirable:
*/
static inline void * ioremap_nocache (unsigned long offset, unsigned long size)
{
return __ioremap(offset, size, 0);
}
extern void iounmap(void *addr);
/*
* IO bus memory addresses are also 1:1 with the physical address
*/
#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
/*
* readX/writeX() are used to access memory mapped devices. On some
* architectures the memory mapped IO stuff needs to be accessed
* differently.
*/
#define readb(addr) (*(volatile unsigned char *) __io_virt(addr))
#define readw(addr) (*(volatile unsigned short *) __io_virt(addr))
#define readl(addr) (*(volatile unsigned int *) __io_virt(addr))
#define readq(addr) (*(volatile unsigned long long *) __io_virt(addr))
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
#define readl_relaxed(addr) readl(addr)
#define readq_relaxed(addr) readq(addr)
#define __raw_readb readb
#define __raw_readw readw
#define __raw_readl readl
#define __raw_readq readq
#define writeb(b,addr) (*(volatile unsigned char *) __io_virt(addr) = (b))
#define writew(b,addr) (*(volatile unsigned short *) __io_virt(addr) = (b))
#define writel(b,addr) (*(volatile unsigned int *) __io_virt(addr) = (b))
#define writeq(b,addr) (*(volatile unsigned long long *) __io_virt(addr) = (b))
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
#define __raw_writeq writeq
#define memset_io(a,b,c) memset(__io_virt(a),(b),(c))
#define memcpy_fromio(a,b,c) memcpy((a),__io_virt(b),(c))
#define memcpy_toio(a,b,c) memcpy(__io_virt(a),(b),(c))
#define inb_p(addr) readb(addr)
#define inb(addr) readb(addr)
#define outb(x,addr) ((void) writeb(x,addr))
#define outb_p(x,addr) outb(x,addr)
#define mmiowb() do { } while (0)
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment