Merge tag 'pci-v5.8-fixes-2' of...

Merge tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master

Pull PCI fixes from Bjorn Helgaas:

 - Reject invalid IRQ 0 command line argument for virtio_mmio because
   IRQ 0 now generates warnings (Bjorn Helgaas)

 - Revert "PCI/PM: Assume ports without DLL Link Active train links in
   100 ms", which broke nouveau (Bjorn Helgaas)

* tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
  virtio-mmio: Reject invalid IRQ 0 command line argument

drivers/pci/pci.c

@@ -4638,8 +4638,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
  * pcie_wait_for_link_delay - Wait until link is active or inactive
  * @pdev: Bridge device
  * @active: waiting for active or inactive?
- * @delay: Delay to wait after link has become active (in ms). Specify %0
- *	   for no delay.
+ * @delay: Delay to wait after link has become active (in ms)
  *
  * Use this to wait till link becomes active or inactive.
  */
@@ -4680,7 +4679,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active,
 		msleep(10);
 		timeout -= 10;
 	}
-	if (active && ret && delay)
+	if (active && ret)
 		msleep(delay);
 	else if (ret != active)
 		pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
@@ -4801,28 +4800,17 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
 	if (!pcie_downstream_port(dev))
 		return;
 
-	/*
-	 * Per PCIe r5.0, sec 6.6.1, for downstream ports that support
-	 * speeds > 5 GT/s, we must wait for link training to complete
-	 * before the mandatory delay.
-	 *
-	 * We can only tell when link training completes via DLL Link
-	 * Active, which is required for downstream ports that support
-	 * speeds > 5 GT/s (sec 7.5.3.6).  Unfortunately some common
-	 * devices do not implement Link Active reporting even when it's
-	 * required, so we'll check for that directly instead of checking
-	 * the supported link speed.  We assume devices without Link Active
-	 * reporting can train in 100 ms regardless of speed.
-	 */
-	if (dev->link_active_reporting) {
-		pci_dbg(dev, "waiting for link to train\n");
-		if (!pcie_wait_for_link_delay(dev, true, 0)) {
+	if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) {
+		pci_dbg(dev, "waiting %d ms for downstream link\n", delay);
+		msleep(delay);
+	} else {
+		pci_dbg(dev, "waiting %d ms for downstream link, after activation\n",
+			delay);
+		if (!pcie_wait_for_link_delay(dev, true, delay)) {
 			/* Did not train, no need to wait any further */
 			return;
 		}
 	}
-	pci_dbg(child, "waiting %d ms to become accessible\n", delay);
-	msleep(delay);
 
 	if (!pci_device_is_present(child)) {
 		pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);

drivers/virtio/virtio_mmio.c

@@ -641,11 +641,11 @@ static int vm_cmdline_set(const char *device,
 			&vm_cmdline_id, &consumed);
 
 	/*
-	 * sscanf() must processes at least 2 chunks; also there
+	 * sscanf() must process at least 2 chunks; also there
 	 * must be no extra characters after the last chunk, so
 	 * str[consumed] must be '\0'
 	 */
-	if (processed < 2 || str[consumed])
+	if (processed < 2 || str[consumed] || irq == 0)
 		return -EINVAL;
 
 	resources[0].flags = IORESOURCE_MEM;