[POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards

Renamed the MPC8568 MDS platform code to follow other 85xx boards.  There
isn't anything specific about the 8568 MDS code that wouldn't apply to another
85xx MDS system at this point.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/configs/mpc8568mds_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Wed Feb  7 23:54:25 2007
+# Linux kernel version: 2.6.20
+# Sat Feb 17 16:26:53 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
-# CONFIG_8xx is not set
 # CONFIG_E200 is not set
 CONFIG_85xx=y
 CONFIG_E500=y
@@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -130,7 +131,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC8568_MDS=y
+CONFIG_MPC85xx_MDS=y
 CONFIG_MPC85xx=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
 CONFIG_MPIC=y
@@ -162,6 +163,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -171,6 +173,7 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
@@ -216,6 +219,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -301,6 +305,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -341,7 +346,6 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -543,6 +547,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -698,6 +703,7 @@ CONFIG_FIRMWARE_EDID=y
 # HID Devices
 #
 CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -759,6 +765,10 @@ CONFIG_HID=y
 # DMA Devices
 #
 
+#
+# Auxiliary Display support
+#
+
 #
 # Virtualization
 #
@@ -896,7 +906,8 @@ CONFIG_BITREVERSE=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 
 #
 # Instrumentation Support
@@ -914,6 +925,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
@@ -922,7 +934,6 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -932,6 +943,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
 # CONFIG_BDI_SWITCH is not set
@@ -943,6 +956,8 @@ CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
 # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
 # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
 
 #
 # Security options
@@ -970,8 +985,10 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -985,6 +1002,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #

arch/powerpc/platforms/85xx/Kconfig

@@ -23,12 +23,12 @@ config MPC85xx_CDS
 	help
 	  This option enables support for the MPC85xx CDS board
 
-config MPC8568_MDS
-	bool "Freescale MPC8568 MDS"
+config MPC85xx_MDS
+	bool "Freescale MPC85xx MDS"
 	select DEFAULT_UIMAGE
 #	select QUICC_ENGINE
 	help
-	  This option enables support for the MPC8568 MDS board
+	  This option enables support for the MPC85xx MDS board
 
 endchoice
 
@@ -47,7 +47,7 @@ config MPC85xx
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS
+	default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS
 
 config PPC_INDIRECT_PCI_BE
 	bool

arch/powerpc/platforms/85xx/Makefile

@@ -5,4 +5,4 @@ obj-$(CONFIG_PPC_85xx)	+= misc.o pci.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
-obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o
+obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o

arch/powerpc/platforms/85xx/mpc8568_mds.c → arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -8,7 +8,7 @@
  *	   Yin Olivia <Hong-hua.Yin@freescale.com>
  *
  * Description:
- * MPC8568E MDS PB board specific routines.
+ * MPC85xx MDS board specific routines.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -69,13 +69,13 @@ unsigned long isa_mem_base = 0;
  * Setup the architecture
  *
  */
-static void __init mpc8568_mds_setup_arch(void)
+static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
 	static u8 *bcsr_regs = NULL;
 
 	if (ppc_md.progress)
-		ppc_md.progress("mpc8568_mds_setup_arch()", 0);
+		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
 
 	np = of_find_node_by_type(NULL, "cpu");
 	if (np != NULL) {
@@ -143,26 +143,26 @@ static void __init mpc8568_mds_setup_arch(void)
 #endif	/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc8568_ids[] = {
+static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "qe", },
 	{},
 };
 
-static int __init mpc8568_publish_devices(void)
+static int __init mpc85xx_publish_devices(void)
 {
-	if (!machine_is(mpc8568_mds))
+	if (!machine_is(mpc85xx_mds))
 		return 0;
 
 	/* Publish the QE devices */
-	of_platform_bus_probe(NULL,mpc8568_ids,NULL);
+	of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
 
 	return 0;
 }
-device_initcall(mpc8568_publish_devices);
+device_initcall(mpc85xx_publish_devices);
 
-static void __init mpc8568_mds_pic_init(void)
+static void __init mpc85xx_mds_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
@@ -215,18 +215,18 @@ static void __init mpc8568_mds_pic_init(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static int __init mpc8568_mds_probe(void)
+static int __init mpc85xx_mds_probe(void)
 {
         unsigned long root = of_get_flat_dt_root();
 
         return of_flat_dt_is_compatible(root, "MPC85xxMDS");
 }
 
-define_machine(mpc8568_mds) {
+define_machine(mpc85xx_mds) {
 	.name		= "MPC85xx MDS",
-	.probe		= mpc8568_mds_probe,
-	.setup_arch	= mpc8568_mds_setup_arch,
-	.init_IRQ	= mpc8568_mds_pic_init,
+	.probe		= mpc85xx_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
 	.get_irq	= mpic_get_irq,
 	.restart	= mpc85xx_restart,
 	.calibrate_decr	= generic_calibrate_decr,